Question about 1996 Nissan Maxima
Code descriptions p1447. P0136 p2270 p2271
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: I have a code P1447
My experience with my own 97 Pathfinder was that the EVAP canister internally ruptured, spreading charcoal pellets throughout connected portions of the vacuum system.
The tech replaced the EVAP canister and blew lines out with compressed air, but the P1447 code came back.
A few weeks later I had the tech check why the P1447 code came back, and he determined that the EVAP Canister Purge Volume Control Solenoid Valve had failed, as it did not pass certain resistance measurement tests. He replaced the valve, $288 + labor, blew a few remaining carbon bits out, and the problem seems to be fixed.
I kind of choked at the $288 price though, and took the part home. Two screws to pop it open. Turns out it was filled (surprise) with pulverized charcoal dust and would not operate.
The valve is a little rotating magnet that turns and screws a lipstick-style plunger up and down. I tapped out all the carbon and then started turning the bearings, which were crunchy sounding. However, the carbon eventually gave way to the bearings and they're spinning just fine now. I haven't tested the part, but from the simplicity of it, I have no doubt it would get me down the road many more miles.
Posted on Feb 02, 2011
SOURCE: p1447 and knock sensor code
If your map sensor is bad, it will also cause p1447 to illuminate.
You can check the air passage continuity on the map sensor/solenoid valve.
Provide the switch with 12 volts, please note which pin is positive and negative.
Check air passage continuity between A-B, A-C. My manual shows that if there is no continuity between A-B but there is between A-C then your map sensor/solenoid valve is bad and should be replaced.
It is listed as a cause for the p1447 light.
I hope this helps
Posted on Mar 27, 2011
SOURCE: 1996nissan pickup/p1447
Please let me know if you can open this. If not, let me know because this is all the info for the fault code that you have. I would post it but it is too large.
Posted on Dec 03, 2011
SOURCE: I have 97 nissan 200sx 1.6 L It shows P1447 code would like to know how to fix this and also have a problem with distributor cap and rotor, they get a carbon build up on them and the car won't har
if they are getting carcon build up then you have a weak ignition control module and the wrong spark plugs . with the wrong spark plugs it is running and working hard
Posted on Dec 04, 2012
Tips for a great answer:
Jan 27, 2017 | 2008 Chevrolet Silverado
Jul 30, 2015 | Cars & Trucks
Feb 28, 2015 | Cars & Trucks
Sep 27, 2014 | 2002 Subaru Forester
Jul 14, 2013 | 2005 Ford Escape
Jan 22, 2012 | 2002 Subaru Forester
Sep 28, 2011 | 2005 Honda Accord
Aug 06, 2010 | Hyundai Elantra Cars & Trucks
May 01, 2009 | 2002 Ford SVT Focus
298 people viewed this question
Usually answered in minutes!