Question about 1995 Oldsmobile Cutlass Supreme

1 Answer

Shifter is stuck in park

How do I get the console off. My shifter is in the floor, can't figure out how to get the knob off the shifter to get console off.

Posted by on

  • penski_72 Feb 01, 2009

    i have the same problem i got the gear shift knob off but i am unable to get the top of the console off.

  • penski_72 Feb 01, 2009

    does anyone know how to fix this problem with it being stuck in park.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

On the front of knob is a small u shaped pin you have to pullout. that would be on the radio and dash side

Posted on Jan 24, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to I repair my shift gears on my Chrysler 2007 Sebring? It's stuck in park.


I assume this is a floor shift,remove shifter knob, pry the trim around the shifter up to remove to get to the 2 screws there, in the storage compartment there may be 4 screws, pull Ebrake up as far as you can then rear of console upward over ebrake handle then back,remember you have to reverse what you just did to put it back together. If your after the shift cable try to pop it off the trans first to see if it can be moved out of park at the trans if so more likely is the cable if not you may have internal trans problem.

Dec 27, 2014 | 2007 Chrysler Sebring 2.7

1 Answer

How to install a center console on a pacifica


Hi Melissa, I'm glad to help, here is the instruction below I said I'd send. Have an awesome day.


23 - Body/Interior/CONSOLE, Floor, Front/Removal REMOVAL [img id=LOPTableImg src="https://w05.dealerconnect.chrysler.com/service/mds2002/common/images/collapse.gif"> Click to display a list of Labor Operations associated with this procedure 1. Remove shift bezel. (Refer to 23 - Body/Interior/BEZEL, Shifter - Removal) .
2. Remove transmission range indicator surround bezel Figure 1.
3. Remove two screws attaching front floor console to the lower instrument panel Figure 2. 4. Open cup holder and remove two attaching screws to bottom of cup holder. 5. Open bin and remove two attaching screws to bottom of bin. 6. Remove front floor console sidewall attaching screws, three per side. 7. Raise front floor console and disconnect wiring harness. 8. Remove front floor console from vehicle.
374297.jpg Figure 1 - TRANSMISSION RANGE INDICATOR SURROUND BEZEL 1 - INSTRUMENT PANEL 2 - AUTOSTICK SHIFTER ASSEMBLY 3 - TRACTION CONTROL SWITCH 4 - TRANSMISSION RANGE INDICTOR SURROUND BEZEL 5 - KNOB SET SCREW 6 - SHIFTER KNOB 7 - FLOOR SHIFT BEZEL 8 - WIRE CONNECTOR 9 - INSTRUMENT PANEL WIRING HARNESS 10 - INSTRUMENT PANEL WIRING CLIP
374299.jpg Figure 2 - FRONT FLOOR CONSOLE 1 - FORWARD CONSOLE CLOSEOUT PANEL 2 - CLOSEOUT PANEL PUSH PIN RETAINER 3 - INSTRUMENT PANEL WIRING 4 - FLOOR CONSOLE BASE 5 - FRONT FLOOR CONSOLE ATTACHING SCREWS TO LOWER INSTRUMENT PANE AND BASE 6 - FRONT FLOOR CONSOLE WIRING CONNECTOR 7 - FRONT FLOOR CONSOLE 8 - ATTACHING L-BRACKETS

May 17, 2014 | 2006 Chrysler Pacifica

1 Answer

Shifter button stuck


there should be 2 Phillips screws hold the shifter knob to the shaft. once you take out those screws it should just pop up. as far as I know there are no springs in the knob it's just a slide button. the rest of the parts are part of the shifter assembly.

Apr 02, 2014 | 2006 Kia Carnival 2.7

1 Answer

Jeep wrangler 2005 automatic floor gear shifter is loose won't engage stuck in park


try pushing the knob down onto the shifter a little bit then try and shift. Sometimes if that knob is raised even a little bit it will be locked in park. Can't be 100% sure without seein it but worth a shot. Hope that helps you.

Oct 02, 2012 | Jeep Wrangler Cars & Trucks

2 Answers

How do I adust the emergency brake


There is an adjuster under the console. See instructions below from autozone.com:

    1. On vehicle with low series floor console:
    1. If equipped, remove the manual transmission shift knob by turning counterclockwise.
    2. Remove the floor console front finish panel.
    3. Apply the parking brake, then remove the floor console rear finish panel.

    1. On vehicle with high series floor console:
    1. Apply the parking brake.
    2. Remove the floor console finish panel.

    1. Remove the adjustment nut clip.
    2. Turn the parking brake control adjustment nut so that the parking brake control stroke is three to five notches when pulled.

      0996b43f80204da9.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Turn the parking brake control adjustment nut so that the parking brake control stroke is three to five notches when pulled
    3. Confirm the parking brake is applied.
    4. Install the adjustment nut clip.
    1. On vehicles with high series floor console:
      1. Install the floor console rear finish panel.

    1. On vehicles with low series floor console:
    1. Install the floor console rear finish panel.
    2. Install the floor console front finish panel. If equipped, install the manual transmission shifter knob by turning clockwise.
  • Sep 12, 2010 | 2004 Ford Escape

    1 Answer

    Gmc yukon stuck in park.


    possible brake switch not sending signal to shifter solenoid to allow shifter movement. possible broken shifter knob/relay rod in shifter assembly

    Nov 15, 2009 | 2002 GMC Envoy

    1 Answer

    How can I remove gear shift knob on a 2003 Navigator?


    it looks like you disconnect the shift cable and remove the center console finish panel with the shifter.


    SECTION 501-12: Instrument Panel and Console 2003 Expedition/Navigator Workshop Manual
    REMOVAL AND INSTALLATION Floor Console —Front, Navigator Removal and Installation
    1. Apply the parking brake.
    1. Position the front seat forward.
    1. Remove the two front floor console rear bolts.
    1. Position the front seats rearward.
    1. Disconnect the battery. For additional information, refer to Section 414-01 .
    1. Remove the pin-typ retainer and the window control switch panel.
      • Disconnect the electrical connectors.
    1. Move the shift lever to NEUTRAL and position the shift indicator bezel aside.
    1. Remove the screws and the center console finish panel.
      • Disconnect the electrical connectors.
    1. Disconnect the shift cable.
    1. Disconnect the front floor console electrical connectors.
      1. Loosen the electrical connector bolt.
      1. Disconnect the connector.
      1. Disconnect the electrical connector.
    1. Remove the front floor console side finish panel.
      • If equipped, disconnect the electrical connector.
    1. Remove the front floor console front bolts.
    1. Remove the floor console.

    Apr 17, 2009 | 2003 Lincoln Navigator

    2 Answers

    04 Navigator gear shift button broken


    I only have 2003 Nav procedure. Maybe get used part at car-part.com. Page with * is lowest price.

    SECTION 307-05: Automatic Transaxle/Transmission External Controls 2003 Expedition/Navigator Workshop Manual
    REMOVAL AND INSTALLATION Selector Lever —Floor Shift Removal and Installation
    1. Lift the floor shift PRNDL bezel.
    1. Disconnect the PRNDL bezel wire harness connector.
    1. Remove the shift lever handle and cover.
      1. Slide the handle bezel down.
      1. Remove the screw.
      1. Disconnect the TCS wire harness.
      1. Lift assembly from the shifter lever.
    b038436.gif
    1. Position the window regulator control panel aside.
    1. Remove the screws and the console finish panel.
    1. Remove the left side console access panel.
    1. Disconnect the transmission shift cable from the transmission selector arm.
    1. Remove the transmission shift cable retaining clip from the floor shift mechanism through the console access.
    1. Remove the four bolts retaining the floor shift mechanism to the floor.
    1. Disconnect the floor shift mechanism wire harness connector.
    1. Remove the floor shift mechanism from the console.
    1. Remove the brake shift interlock actuator, parking brake release mechanism and harness.
      • Remove the wire harness retainers.
      • Remove the wire harness retainers.
      • Remove the two screws retaining the brake shift interlock assembly.
      • Remove the two screws retaining the parking brake controller.

    Mar 15, 2009 | 2004 Lincoln Navigator

    1 Answer

    How can i find out my parking brake adjustments on my 2003 ford escape?


    Parking Brake Cable Adjustment Vehicle with low series floor console
    1. Remove the floor console front finish panel.
      1. If equipped, remove the manual transmission shift knob by turning counterclockwise.
      1. Remove the floor console front finish panel.
    1. Remove the floor console rear finish panel.
      1. Apply the parking brake.
      1. Remove the floor console rear finish panel.
    Vehicle with high series floor console
    1. Remove the floor console finish panel.
      1. Apply the parking brake.
      1. Remove the floor console finish panel.
    All vehicles
    1. Remove the adjustment nut clip.
    1. Turn the parking brake control adjustment nut so that the parking brake control stroke is three to five notches when pulled.
    1. Confirm the parking brake is applied.
    1. Install the adjustment nut clip.
    Vehicle with high series floor console
    1. Install the floor console rear finish panel.
    Vehicle with low series floor console
    1. Install the floor console rear finish panel.
    1. Install the floor console front finish panel.
      • If equipped, install the manual transmission shifter knob by turning clockwise.

    Jan 21, 2009 | 2003 Ford Escape

    1 Answer

    2008 Chevy Cobalt - care is running, but I can't turn it off! Go to park, try and move the key and it won't move to the off position to turn off the car


    replace the shifter assembly.I replace alot of them.use this bulletin as a reference.Subject: Various Concerns With Shifter and/or Ignition Key (Replace Shifter Assembly/Shifter Components or Ignition Lock Cylinder )


    Models: 2005-2008 Chevrolet Cobalt

    2005-2006 Pontiac Pursuit (Canada Only)

    2007 Pontiac G5

    with Automatic Transmission 4T45-E (RPO MN5)

    Some customers may comment on any of the following concerns:

    • The shifter is hard to move or binds.

    • They cannot remove the ignition key.

    • It takes high effort to rotate the key.

    Cause 1
    The shifter button may be sticking in the handle.

    Cause 2




    The pin that activates the micro-switch may have moved out of position (refer to illustration above). This causes the micro-switch to fail to engage when the vehicle is placed in Park. If this condition is present, the customer will not be able to remove the key from the ignition.





    The illustration above shows the switch in a correct position.

    Cause 3
    Metal flashing left in the cylinder may cause a high effort to rotate the key.

    Cause 4
    The slider may be binding in the guides. This may cause the shifter to become difficult to operate.

    Correction 1
    Verify that the shifter button is inoperative by evaluating if the park pawl pin on the shifter assembly moves when activating the button. If the parking pawl does not move when the button is activated, the shifter handle will have to be replaced. Refer to Floor Shifter Control Knob Replacement in SI.

    Correction 2
    Important: A change has been made to the shifter assembly for service. The replacement shifter assembly will read PRNDIL (Park, Reverse, Neutral, Drive, Intermediate and Low).

    Verify that the micro switch is out of position. Replace the shifter assembly. Refer to Transmission Control Replacement in SI.

    Correction 3
    Important: Refer to instruction sheet that is supplied with the lock cylinder kit. BO 47869 is an essential staking tool and must be used for the repair.

    Replace the ignition lock cylinder. Refer to Ignition Lock Cylinder Replacement in SI.

    Correction 4
    Replace the slide indicator and guides in the shifter following the procedure below:

    Apply the parking brake.
    Remove the upper console trim. Refer to Trim Plate Replacement-Console Front in SI.
    Remove shifter knob. Refer to Floor Shifter Control Knob Replacement in SI.
    Remove the indicator plate. Use a flat-bladed screwdriver to release the locking tabs.
    Remove the shifter indicator lens.
    Pull up on the indicator and remove it from the assembly.
    Remove the two front rails by unsnapping the front and lifting up, and then back, to remove the rails from the shifter assembly.
    Install the new guides. Place the hook end into the assembly and push down. It will snap into place.
    Install the new slide indicator. With the transmission in neutral, place the slide over the shifter and into the guides. Move the slide indicator down the guides in the front and rear.
    Important: Replace the shifter indicator lens if damage is present due to the slider binding or if it becomes damaged during disassembly.

    Install the shift indicator lens.
    Install the shift indicator plate.
    Install the shifter knob. Refer to Floor Shifter Control Knob Replacement in SI.
    Install the upper console trim. Refer to Trim Plate Replacement-Console Front in SI. post back with what you find.

    Jan 20, 2009 | 2008 Chevrolet Cobalt

    Not finding what you are looking for?

    Open Questions:

    See all 1995 Oldsmobile Cutlass Supreme Questions

    1995 Oldsmobile Cutlass Supreme Logo

    Related Topics:

    308 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Oldsmobile Experts

    yadayada
    yadayada

    Level 3 Expert

    64034 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    21990 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    6812 Answers

    Are you an Oldsmobile Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...