Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Make sure you have taken out ALL the screws in the doors. There are screws on the sides of the panel itself going around the door and then there will be one at the door handle. Once you know you have removed them all, place a flat head screwdriver on the outside corner (Bottom closes to door handle) and pry it up until you can get your hand on it and continue around the bottom of the door.
Once you get the bottom out just give it a bit of force and I also suggest you buy some new panel plugs. since the old plastic ones will most likly break or deform.
Posted on Feb 11, 2009
You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door.. It sounds like the linkage connecting to the outside handle may have come off or broken
Posted on Aug 14, 2009
SOURCE: How remove the door panel?
You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door
Posted on Aug 14, 2009
SOURCE: Remove door panel on a Ford Van
For a 1999 Ford Econoline 150 (assume the same or very similar), remove triangular plastic cover over mirror assembly by prying straight out, remove plastic door handle cover by prying up from the front side, remove electronic door switches by prying up from back side, remove round plastic cover at bottom rear of door panel. Four screws are now revealed, remove them. Lift door panel straight up, clips are hooks (not snap in). Work door switch assembly out of door panel. Set door panel aside. Reassemble in reverse order.
Posted on Nov 21, 2009
Tips for a great answer:
Sep 30, 2014 | 1997 Ford Taurus
The emergency shut-off, fuel reset, or inertia switch - all referring to the same thing - is typically located in the back right corner of the vehicle.
Sedan: Open trunk lid, look to right side near fuel filler port, pull back the trunk liner to expose the switch.
Wagon: Open hatch, look to right side near fuel filler port, open access panel.
Recessed into the top of the switch is a red button. If tripped, then push down until it resets, or clicks back into the on position.
Sep 24, 2013 | 1995 Ford Taurus
Sep 13, 2012 | 1994 Ford Taurus
Feb 02, 2010 | 1996 Ford Taurus
Jan 23, 2010 | 1997 Ford Escort
Dec 29, 2009 | 1996 Ford Taurus
May 02, 2009 | Ford Taurus Cars & Trucks
Aug 31, 2008 | 2001 Ford Taurus
Jul 26, 2008 | 1996 Ford Taurus
126 people viewed this question
Usually answered in minutes!