Question about 2003 Ford Explorer
Pull the boot that carries the wires to from the car to the door open it and check for broken wires , if there broken wires repair as necessary , also if there is no broken wires , closed driver door and push it harder while its closed push and check for the adjar light , check all doors . But I would start with door push first if it didn't do anything check the wires . Hope this helps .
Posted on Jan 13, 2013
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
the wire on the door latch make sure they are plugged in or unplug it and the light should go out if it does not then it's not that door
Posted on Feb 16, 2009
have you had the door panel apart before for anything, the switch is on your latch inside your door. I hope this helps you. I am just trying to be helpful, and will help you all the way through your repair if you like, My compensation is my rating. please be generous..lol
Posted on Dec 19, 2008
SOURCE: 95 ford windstar door ajar
These switches are inside the doors attached to the door latch assembles.If you know some one with a scan tool you can go into the body computer and see which one is showing open when all the doors are closed. The most likly one is the drivers side door or the two in the rear gate. I've replaced those the most.If you don't want to replace them you can unplug them and the lights will go off. Hope this helps. If you need more info let me know> Thanks Dan
Posted on Jul 15, 2008
I had this problem on my 2003 explorer and took WD40 and gave the lock mechanism a good dose where it meets the clasp on the door jam. Then open and close the doors a couple of times to get them working. They get gummed up and sometimes have a tendency to stick.
Posted on Feb 18, 2009
The door sensors will need to be replaced. A screws can be removed and then a wire can be taken of and you then can replace the switch.
Posted on Sep 25, 2009
Tips for a great answer:
Dec 21, 2014 | 1999 Ford Ranger SuperCab
Sep 26, 2014 | 2004 Ford F150
Jan 12, 2014 | 2004 Lexus GX 470
Mar 07, 2011 | 1999 Lincoln Town Car
Nov 05, 2009 | 1999 Ford Windstar
Jan 25, 2009 | 2000 Ford F250 Super Duty Crew Cabs
Jan 20, 2009 | 1998 Ford Expedition
Dec 29, 2008 | 2003 Ford Explorer
Dec 16, 2008 | 2001 Ford F150 Styleside SuperCrew
Sep 16, 2008 | 1998 Dodge Caravan
148 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: