Question about 1997 Acura CL
Some computers have a built in system that limits engine rpm to low speeds when an engine overheat occurs( Ford). Check for such a code. Check that there is water in the radiator and that the temp gauge is working
Posted on Jan 13, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
back side of block under intake if its a 2.2 or a 2.3 if its a 3.0 its on the passenger side of engine bay if you turn the wheel you will be looking at it
Posted on Feb 03, 2009
SOURCE: 97 acura CL ABS light goes on
The ABS light can be on for different reason.
sometimes a bad speed sensor on one of the wheels can trigger the ABS light.
The ABS module, or the entire braking sytem may be faulty, to find out there is need to test the ECU/ABS modules usinga code reader, and to inspect the braking system.
Posted on Jul 01, 2009
under the hood near the firewall. One banjo bolt on top and a quick disconnect fitting on the bottom. Fairly easy-labor book calls for 1.0hr labor.
Posted on Dec 03, 2009
This indicates a problem with the anti-lock brake system, make sure fluid levels are correct, but it is likely that a sensor at one of the wheels has disconnected, causing the light to go on. If you have driven over road debris, snow, ice, etc. something may have damaged a sensor at one of the wheels. Jack up the car and support it to safely go underneath to inspect all 4 wheels at the back sides for damage.
Posted on Dec 18, 2009
Tips for a great answer:
Aug 15, 2013 | 1997 Acura CL
Apr 16, 2010 | 1997 Acura CL
Aug 02, 2009 | 1997 Acura CL
Apr 08, 2009 | 1997 Acura CL
119 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: