Question about Cars & Trucks
Follow your upper radiator hose to top of engine, find (2) bolts to remove ,your thermostat is located right under this, but bfore you start , purchase a new one, with anew gasket, remove the bolts, a little coolant will spill out, no big deal, clean off old gasket, put in new thermostat, just like the way the old one was, install gasket, replace rad hose w/bolts, that you should have cleaned the bolt threads, tighten bolts equally down, tight is tight, too tights broke. get it. good luck
Posted on Jan 13, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 1997 Buick Park Avenue
This is the diagram but you should have factory belt diagram sticker is still somewhere under the hood
To replace the serpentine belt on a V6 3800 you must jack up the motor and remove a motor mount. You must then use a breaker bar with a socket (13/64") and pull it toward the front of the car to release the belt tensioner. Put the new belt on, tighten it, put the mount back on, and lower the jack.
Driving without a belt can cause the motor to overheat, will cut power steering, and will not recharge the battery, so you should probably get a tow
Posted on Jan 08, 2009
Check out this link. It may help you with your problem.
Posted on Apr 23, 2009
You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door
Posted on Aug 14, 2009
need to take car somewhere to have the code read with a scanner,try parts stores first some will do it for free if not the dealers have them
Posted on Sep 15, 2009
Tips for a great answer:
Sep 28, 2014 | 2000 Buick Park Avenue
Mar 01, 2013 | 2001 Buick Park Avenue
Dec 04, 2012 | 2000 Buick Park Avenue
Oct 09, 2012 | 1998 Buick Park Avenue
Jul 27, 2012 | 2001 Buick Park Avenue
Sep 16, 2010 | 2001 Buick Park Avenue
Jul 06, 2010 | 2001 Buick Park Avenue
Mar 13, 2010 | 2001 Buick Park Avenue
Jan 26, 2010 | 2001 Buick Park Avenue
Apr 03, 2009 | 2001 Buick Park Avenue
78 people viewed this question
Usually answered in minutes!