Question about 2001 Hyundai Santa Fe
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2001 hyundai santa fe 6
OK. just follow the number on the ignition coils.
And the number on the cylinders are.
The FIREWALL side are 1,3,5, Starting from the belts location.
The RADIATOR side are 2,4,6, Starting from the belts location.
The coil with number 1 go to cylinder 1. as the same way the rest of the coils and cylinders.
OK... I hope this solve your question .
THank you for use fixya.
Posted on Jul 25, 2008
There is a very good chance the Crankshaft Position Sensor needs replaced. The CKP is what I replace the most for no spark on the 2.4 engine. It is behind the timing belt cover mounted above the crankshaft sprocket. Sometimes they just fail because the sensor was a bad part, other times teeth shear off of the timing belt and get in the wrong place and break the sensor.
Posted on Jun 30, 2009
There are two speed sensors, Input sensor is located on top of the bell house. Output sensor is located on the firewall side of the bell house.
Posted on Aug 18, 2009
Removal & Installation
Posted on Oct 31, 2009
The crankshaft sensor is responsible for sending a signal to the PCM (powertrain control module) it tells the computer what cylinder to fire at the coresponding time, it lines up with whats called a trigger wheel on the crankshaft as the crankshaft spins there are small notches cut into the trigger wheel when 1 of the notches lines up with the crankshaft sensor a magnetic field forms between the trigger whell and the sensor and the computer charges the coil for that corresponding cylinder, once the magnetic field dissappears when the notch passes by the sensor the computer fires the spark plug for that corresponding cylinder if you have a bad crankshaft position sensor you will more then likely have a stalling condition due to weak spark or if the sensor is totally gone your engine will just crank and not start due to the spark plugs not having any spark being delivered to them......
Posted on Dec 10, 2010
Tips for a great answer:
Jan 08, 2017 | 2009 Hyundai Santa Fe
Jul 28, 2014 | 2003 Hyundai Santa Fe
Jan 08, 2014 | 2003 Hyundai Santa Fe
Feb 28, 2013 | 2001 Hyundai Santa Fe
Sep 24, 2011 | 2005 Hyundai Santa Fe
Jan 23, 2010 | 2003 Hyundai Santa Fe
Dec 14, 2009 | 2001 Hyundai Santa Fe
Jun 29, 2009 | 2001 Hyundai Santa Fe
Dec 10, 2008 | 2003 Hyundai Santa Fe
Apr 20, 2017 | 2001 Hyundai Santa Fe
394 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: