Question about 2006 Ford Freestyle

1 Answer

Need to replace tailite on a 2006 ford freestyle

How do i remove the tailite assemble .I removed the 2 screws , does the unit slide out ,it seems to be stuck??

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,533 Answers

Open up the hatch just inside remove the panel there should be 3 or 4 10mm bolts you take off and the assembly should be free

Posted on Jan 23, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

On my ford freestyle gear indicator light how change it

Remove the PRNDL trim ring.
Remove the upper console panel.
Slide the lower shift knob bezel downward.
  1. Remove the bolt and lift up on the shift knob to remove.
Remove the lower shift knob bezel.
Disconnect the light bulb from the PRNDL bezel. an replace .

26002487-w0jffanovav232xjqcbliw5g-1-0.gif Don't think you need take shifter knob off . Just PRNDL trim plate an upper console plate . They should just pull up , use plastic trim tool to get it so you can get your fingers under an pull up carefully .

26002487-w0jffanovav232xjqcbliw5g-1-2.gif PRNDL trim plate

26002487-w0jffanovav232xjqcbliw5g-1-5.gif Light blub connector !


Dec 11, 2015 | 2006 Ford Freestyle

1 Answer

How to replace stater on ford free style 2005

  1. Starter - AutoZone Freestyle 2005. REMOVAL & ... Remove the transaxle roll restrictor bolts and the cross brace assembly. Remove the ... Remove the starter from the vehicle.

Jul 19, 2015 | Ford Cars & Trucks

1 Answer

How to remove headlamp assembly 2006 Ford Five Hundred

bulb replacement?

You may be able to clear bumper cover by pusihing down while pulling out lamp.

Please rate.

SECTION 417-01: Exterior Lighting 2005 Freestyle/Five Hundred/Montego Workshop Manual REMOVAL AND INSTALLATION Procedure revision date: 03/14/2005
Headlamp Assembly - Five Hundred, Montego adobe.gif Printable View (211 KB) n0050703.jpg
Item Part Number Description 1 W702706 Top headlamp assembly bolts (2 required) 2 W704551 Side headlamp assembly bolt 3 W702706 Front headlamp assembly bolt 4 13005/13006 Headlamp assembly (RH/LH)
  1. Remove the front bumper cover. For additional information, refer to Section 501-19.
  1. Remove the 4 bolts and the headlamp assembly.
    • Disconnect the electrical connectors.
  1. Connect the electrical connectors and position the headlamp assembly in place.
  1. Install the side headlamp assembly bolt.
    • Tighten to 11 Nm (8 lb-ft).
  1. Install the front headlamp assembly bolt.
  1. Install the top outboard headlamp assembly bolt.
  1. Install the top inboard headlamp assembly bolt.
  1. Install the front bumper cover. For additional information, refer to Section 501-19.

Aug 03, 2011 | Ford Five Hundred Cars & Trucks

2 Answers

I need to get to the tail light/turn signal on my 2006 focus hatchback. wing nut and one screw on the flange are off, but the assembly seems stuck at the upper tip.

there may be a clip-in inside which is holding the unit in, look and scope out around the area, remove any carpeting out the way to see any angles which may be hiding a place where a screw can remain hidden, once you have checked and took out any visible screws, take the assembly and pull it off with some force, it will pop right off. you will see a white tab-push in clip which is holding the assembly securely. Once the assembly is removed you can swap the bulbs.

Jun 09, 2011 | 2006 Ford Focus

1 Answer

Ford freestyle sel 2005 brake lights not working, the turn signals go faster then normal inside the vehicle, as far as i know the blinkers in back don't work either. looked at the fuse box and seems...

Generally when the turn indicators blinks really fast it means that the bulb has burnt out and needs replacing. I believe that they are dual filament bulbs in the back meaning that the stop/turn/park light are all in one bulb. In order to gain access to the bulbs you'll need to remove the tail light assembly. You will have to open the rear hatch and on the bottom by the taillight you should see two screws. Remove these screws and pull the taillight out and disconnect the electrical connectors. Next you will have to remove the socket. To do this just turn it,counter-clockwise I believe, slightly and it should pop right out. Replace the bulb and reinstall and you should be all set. I hope this helps you out.

Mar 09, 2011 | 2005 Ford Freestyle

2 Answers

I have a 2006 Ford Freestyle with 70K miles. My

No solution. Just got the EXACT same issue last weekend. myfordfreestyle notes said to remove air intake and clean throttle body with basic tb cleaner. seemed to help, but getting some more engine reving during routine shift into park situations.

Any ideas out there? =H

May 14, 2010 | 2006 Ford Freestyle

1 Answer

Trying to replace rear turn signal light by following manual...which I can usually do..however we can't seem to get past removing the 2 has proven very difficult to find the clips that it says...

They are on a rail, after removing the screws it should slide towards you. Since it just wiggles, there are small plastic studs that keep it in place. I you need to pull it towards the front of the car or 90deg out from the front of the van.

Aug 20, 2009 | Chevrolet Express Cars & Trucks

1 Answer

Problem removing light assembly on a 2005 Focus

have you removed the bolt under the unit only accessible from under the car you will also have to remove the front grill and the unit should just slide out. i remove these quite often as its easier to change the light bulbs

Nov 23, 2008 | 2005 Ford Focus

Not finding what you are looking for?
2006 Ford Freestyle Logo

Related Topics:

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers


Level 3 Expert

5626 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides