Question about 2001 Ford F350 Super Duty SuperCab

Open Question

Truck starts and idles fine put it in gear and push the peddle some times the service light comes on truck wont take fuel other times it goes fine

7.3 diesl ! truck starts and idles fine! when i put it in gaer and push the peddle it doesnt respond ! engine just idles . when it does respond hafe to keep it above 1000 rpm or it will go bake to idle and hafe to start process of pushing the till it responds all over again. note: replaced pedle no change !

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

justuscc
  • 360 Answers

SOURCE: idle speed problem

is this the 7.5l motor

Posted on Sep 30, 2008

  • 1 Answer

SOURCE: idles rough and won't accelerate

check the cat

Posted on Jan 17, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why are so many trouble diagnostic codes being thrown


sounds like you speed sensor and your throttle poistion sensor

Sep 02, 2014 | Cars & Trucks

1 Answer

95 Dodge Neon Idles but when I push the peddle it wants to stall


Whats the fuel pressure at idle ?
And is the check engine light on ?

Sep 02, 2013 | Dodge Neon Cars & Trucks

1 Answer

1988 GMC pickup 4x4 350 engine its hard starting and will not idle i gave it a full tune up even a new fuel filter ive checked and changed all sencors on the motor


Do a compression test. The pistons and rings may not seal enough anymore. Try push-starting it in 2nd gear. When you push it ,it will turn the engine faster and build up more compression, enabling combustion to take place. Aslso check if the fuel pressure regulator is not leaking through the vacuum hose, causing it to flood.

Apr 30, 2017 | 1988 GMC C1500

1 Answer

My 1988 dodge Dakota 3.9 3 speed automatic 2 w Dr.idles rough and sometimes dies at a stop light and won't restart unless I put the gassed peddle to the floor.when it does finally start I have to keep...


Replace your hose going from intake to brake booster ( vacuum leak) check all other hoses also. Clean the throttle body. And a tune up probably wont hurt either.

Jun 09, 2017 | Cars & Trucks

1 Answer

94 wrangler dies in gear


You don't need a scanner. If you cycle the key off and on 5 times, the codes will start flashing. Here is a link to jeeps and their trouble codes. There aren't that many in the older OBD-1 systems.
https://www.2carpros.com/articles/retrieve-trouble-codes-for-chrysler-dodge-plymouth-odb1-1995-and-earlier-car-mini-van-and-light-trucks

If you have no trouble codes, check fuel pressure. Multiport injection is high pressure, above 40psi, but Jeep would have specs.

May 11, 2017 | 1994 Jeep Wrangler

1 Answer

Looses power under a load put in neutral give gas runs good


sound like fuel filter stopped up.if you have distributor type engine your idle speed could be too low and ignition timing off a little.

Dec 11, 2011 | 1995 Toyota Camry

1 Answer

The car can not idle it will stall out and very difficult to start


FIRST THING THAT I DID WAS SOME FUEL INJECTOR CLEANER,NEW PLUGS,CHECKED ALL VACUUM LINES,CLEANED THE THROTTLE WITH A CAN OF CHOKE CLEANER.BUT WARNING DO NOT START YOUR CAR UNTIL YOU PUT THE THOSE BACK ON THE THROTTLE BODY.CHECK ENGINE LIGHT WILL COME ON.MY LAST RESORT WAS AND AJUSTMENT I FOUND IN FRONT OF THE THROTTLE BODY GAS PEDDLE CABLE IT'S A HORSESHOE CLIP YOU AND TURN ALIITLE COUNTER CLOCKWISE TO REMOVE AND PUT IT FORWARD TILL IT IDOLS A LITTLE OVER 1000 RPMS.SO WHEN YOU PUT IT IN GEAR IT WILL IDLE AROUND 750 TO 800 RPMS GL

Oct 12, 2011 | 1999 Saab 9-5

1 Answer

The car starts fine and responds to throttle for about 5 mins then starts coughing and stalls starts up again straight away then repeats


you did'nt specify what year,engine size, or model. but what you describe,is a common poblem.the engine idle control sensor may be bad.is your check engine light "on"? this may be why the lights on. but the light may not be on at all, and the idle control sensor may still be bad. it starts fine, then idles fine for awhile,until you put it into gear to drive it,then it sputters,or dies. or else you start it and then put it into drive on the clear road,then give it full throttle gas on the floor,it takes off fine and runs great,until you come to stop sign or red light,then it dies? suspect a bad idle control sensor 1st then suspect clogged fuel injectors. which can be cleaned easily by adding sea foam,or lucas fuel injector cleaner to your fuel tank. no service fees due. thank you for choosing fixya.com. we always look forward to assisting you in your needs,automotive,or just about anything you need assistance with,fixya.com can assist you with! and again,thank you for choosing fixya.com!

Apr 13, 2011 | Hyundai Accent Cars & Trucks

4 Answers

My 1990 honda civic wont start it is getting spark and also fuel to the injectors


if your car turn over and it sound like it want to start then i think it is your ignition coil so got car scrap yard get another that is your vehicle and put it in.

Oct 09, 2008 | 1990 Honda Civic

Not finding what you are looking for?
2001 Ford F350 Super Duty SuperCab Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5481 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...