Question about Chevrolet HHR

1 Answer

2008 HHR fan not coming on when I turn the fan control knob. I replaced sensor still nothing

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 18 Answers

I'm not sure what sensor ur talking about but usually the problem is with the resistor or blower motor to check which one remove connector from the blower motor located on the passenger side under the dash behind the glove box check with a test light to see if ur getting power and ground to the blower on all speeds if u are replace blower motor if not replace the resistor or may be called blower module if that doesn't repair it u will need a control head

Posted on Jan 12, 2013

  • Richard Jan 12, 2013

    I replaced resistor

×

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad
motor1258
  • 6674 Answers

SOURCE: cooling fan does not come on

Probably 198-210F, or anywhere in between. If your in a cold climate right now It may not even need the fan to cool the return yet. Keep an eye on gauge just in case, and if it climbs too high for your liking, then have it checked. Try turning on defrost & see what comes on, if AC has separate fan , it should come on, if not the other should.

Posted on Jan 01, 2009

emissionwiz
  • 79123 Answers

SOURCE: fan control knob has only two speeds,

there is no computer control unit, what u need to replace is the fan speed control resistor module.

Posted on Mar 22, 2009

  • 1071 Answers

SOURCE: climate fan not working

time for a new unit broke inside where gears move temp doors and such

Posted on Jul 22, 2009

juncro
  • 467 Answers

SOURCE: i own a chevy hhr 2008,this morning im getting

please make sure the vehicle is fully in park, turn the key forward to on and try removing it, while depressing the brake pedal

Posted on Jul 23, 2009

  • 312 Answers

SOURCE: Key win't turn ignition switch in 2008 Chevy HHR

replace the floor shifter. there is a switch on the shifter that allows the key to move. gm has had alot of problems with these shifters.

Posted on Dec 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2008 HHR at 30 MPH the temp meter reads in red area, 45 mph reads normal?


Check the electric radiator fan, if vehicle heats up at low speed then it sounds like the fan is not working! at high speed the air going through the radiator cools the engine. Check the fan out! God-Bless! Hope this helps you. or check to see if you have a bad fuse for the fan or relay is bad and will not turn on fan.

Oct 12, 2017 | 2008 Chevrolet Hhr

2 Answers

My HHR keeps setting the p0193 code. The symptoms are intermittent start and stall, run rough while stopped idling and starts, runs rough, stalls the restarts like nothing happened. and


This code refers to the fuel rail pressure sensor circuit being high. The two most common problems of this code are a faulty sensor and/or faulty pressure regulator. A wiring/computer issue can also contribute to this code. I have had success with numerous vehicles displaying this code by changing the fuel pressure sensor and correcting the problems you have stated

Jan 27, 2016 | 2009 Chevrolet HHR

1 Answer

Where is the ambient temperature sensor located ?


images for 2008 Chevrolet HHR LT Where is the .

Outside Temperature Sensor - Chevy HHR Network

www.chevyhhr.net/forums/...hhr-4/outside-temperature-sensor-30594/
Jul 9, 2010 - I had the outside temp sensor go on my 99 Buick. I don't know where it islocated on the HHR, but it was just a plug in sensor. Take out the old, stick in the new.... 2008 HHR LS 2.2 L Auto Built: 12-19-2007. Bought: 4-26-2009 Location of the ambient engine temperature sensor.... Help ...
Mar 26, 2013
Engine Temperature Sensor
Oct 6, 2011
Outside Temp Display
Dec 19, 2008
Outside air temperature problem
Oct 30, 2007
More results from www.chevyhhr.net

Jan 25, 2016 | 2008 Chevrolet Chevrolet HHR LT

1 Answer

What is a po532 code on a 2008 hhr ss


DTC P0532: Air Conditioning A/C Refrigerant Pressure Sensor Circuit Low Voltage.
The engine control module (ECM) monitors the high side refrigerant pressure through the A/C refrigerant pressure sensor. The ECM supplies a 5-volt reference and a low reference to the sensor. Changes in the A/C refrigerant pressure cause the sensor signal to the ECM to vary. When the pressure is high, the signal voltage is high. When the pressure is low, the signal voltage is low. When pressure is high, the ECM commands the cooling fans on. When pressure is too high or too low, the ECM will not allow the A/C compressor clutch to engage. P0532 Chevrolet Refrigerant Pressure Sensor Circuit Low Input

Oct 03, 2014 | 2008 Chevrolet HHR SS

1 Answer

Where is coolant temperature sensor located on 2008 hhr 2.2l engine


This is confusing, My battery is located next to the spare tire in the rear of the car. I have a 2008 HHR. My AC also quit working at the same time the temp sensor did.

Dec 13, 2012 | 2008 Chevrolet HHR 2.2

2 Answers

2008 Chevy HHR-If I turn my heater control knob all the way to the left on the blue side, I still get heat, for the 1st 3 clicks up. Trying to vent some cooler air, I then tried the A/C. It was cool but...


Heater valve is stuck or needs replacement. I doubt if it is the knob. If you coolant hasn't been flushed out for a few years ..get it flushed and replace the valve. GM uses dexcool coolant that still to this day gums up when it get old and can mess up valves and gaskets.

Oct 04, 2017 | 2008 Chevrolet HHR 2.2

1 Answer

Cooling fan does not come on


Probably 198-210F, or anywhere in between. If your in a cold climate right now It may not even need the fan to cool the return yet. Keep an eye on gauge just in case, and if it climbs too high for your liking, then have it checked. Try turning on defrost & see what comes on, if AC has separate fan , it should come on, if not the other should.

Jan 01, 2009 | 2008 Chevrolet Hhr

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

353 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

79123 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...