Question about 2006 Chevrolet Aveo LS
Acts like it is choking out
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Fault with the IAC valve.there maybe a trouble code associated with it also./ Go to your nearby autozone or auto parts retailer and ask them to put a scanner to the car....make note of the codes if any are found. the IAC valve i usually locate don the throttle body and can be removed for inspection and sometimes cleaning using a good throttle body cleaner spray and a pipe cleaner brush.
Posted on Aug 04, 2009
If the fuel filter is mounted inside the fuel tank at the pump it does not need replacing and is a permanent filter. All you have to do it follow the fuel lines from the fuel tank to the engine. If the filter is mounted in the fuel line you will find it.
Posted on Dec 10, 2009
SOURCE: Passenger rear wheel locked up
This also happened to my 2004 Chevy Aveo. The drivers side rear wheel locked up when it first got extremely cold in December 2009. I had to change the rear wheel cylinder because it broke. They also found the rear wheel bearing also had to be changed. GM charges $180 for 1 rear wheel bearing. To make matters worse I had to order the whole backing plate which came with the rear wheel cylinder and a whole bunch of hardware.
If you look in the GM manual it says that you should flush and change your brake fluid every 24 months. My mechanic told me that moisture normal wrecks the brake cylinder. I'm not sure what happened to the wheel bearing but from now on I'll make sure to flush my brake fluid every 24 months.
Posted on Feb 05, 2010
There is a special socket for O2 sensors which allow the wires to stick out and not get twisted up. It's not expensive and available at most auto parts stores. Disconnect the sensor from the wiring harness, with the plug and then use the socket to remove and replace the new sensor. Re-connect electrical plug.
Please rate this answer. Thank you.
Posted on Apr 08, 2010
This is a picture of your throttle position sensor. It is located on the throttle body, where the air inlet tube enters the intake manifold. Simply unplug the wires, remove the bolts holding it in place, and replace it with the new unit. Hope this helps!
Posted on Jun 03, 2011
Tips for a great answer:
Mar 09, 2016 | 2006 Chevrolet Chevrolet Aveo LS
May 19, 2014 | 2008 Chevrolet Aveo
Dec 22, 2013 | 2000 Chevrolet Astro
Jan 12, 2013 | 2006 Chevrolet Aveo LS
Jun 02, 2011 | 2006 Chevrolet Aveo
Feb 17, 2011 | Chevrolet Aveo Cars & Trucks
Apr 17, 2010 | 2006 Chevrolet Aveo
226 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: