Question about 1997 GMC Sierra
My headlight lens are terrible and need to be cleaned it is on the inside and I have no idea how to get it opened.
Take headlights out and separate glass from plastic by releasing clips. when re-installing use silicone inbetween glass and plastic to stop leaks
Posted on Jan 12, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2000 GMC Sierra left rear door
You may have 2 issues going on at the same time.
1. The child lock safety latch is up, preventing you from opening the door from the inside.
2. The inside clip to the rod that opens the door from the out side could of come off from closing the door to hard. Or the lock itself is getting stuck.
Roll the window all the way down, and look through the window crack with a flash light and see if any of the rods are just hanging and not connected.
If there are you can try using a slim jim with the cut out part facing up and try to catch the latch and pull up this could open the door.
Or you can try to take off the door panel from the inside, however this is very difficult and should be done by a professional becuse you don't want to break any thing or cause more dammage.
Once the door panel is off you can then pull the inside door release rod and open the door.
One more thing you can try: Pull the inside handle and the out side handle at the same time while having some on pull or push on the door, it just might be stuck and need a little force to open!
Posted on Sep 23, 2008
SOURCE: 1999 GMC Sierra 2500 Won't Start
Try loosening the terminals and turning them a bit after spraying them with crc dont take them right off or you might loose the radio code also check the other ends eg earth and starter and do the same if the battery connections don't fix it hope that helps
Posted on Dec 17, 2008
if you put your vehicle information in at advanceautoparts.comyou can search sway bar and find parts that you need - there was someinfo missing on which sierra model you have as far as engine size andvin # match but I came to: http://shop.advanceautoparts.com/webapp/wcs/stores/servlet/partlist_Sway-Bar-Link-Kit_78_R|GRPCHASAMS__sway%20bar___
Posted on Sep 17, 2009
Take the front axle actuator out of the axle. Plug it back in and have some one push the 4x4 button. The actuator should move, it's a liniar motor. If it doesn't then the actuator is bad or there is a wiring problem. If it does there is a problem in your front diff or some where else in the system.
I'd take a guess and say it's the front actuator.
Posted on Oct 11, 2009
You have to remove the air intake filter and then kind of reach around up in there to change it. It can be done, but is a lot of work. On the duramax, it is even harder to do the driver side because of the dual batteries. You have to remove the battery, then the battery seat plate, and undo the winshield washer fluid tank and lean it forward. Then you can just sort of reach in and change both headlights. A very big pain to change a couple of headlights, but if you want HID's.... for the average person, changing a headlight now means a trip to that garage.
Posted on Nov 24, 2009
Tips for a great answer:
Apr 23, 2016 | Cars & Trucks
Dec 26, 2010 | 1997 GMC Sierra
Dec 07, 2010 | 1997 GMC Sierra
Dec 03, 2009 | 1997 GMC Sierra
Nov 07, 2009 | 2008 GMC Sierra 2500HD 2WD
Sep 17, 2009 | 1997 GMC Sierra
Jul 30, 2009 | 1995 GMC Sierra
May 29, 2009 | 1998 Mitsubishi Galant
Nov 16, 2008 | 1998 Buick Century
175 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: