Question about 1995 Pontiac Sunfire

1 Answer

My Brake light and blinker lights just stopped working.

Yesterday they worked just fine. Today I got in the car and it does not work. I checked and changed the fuse but that did not work. I have a Crown Victoria. I have never had this problem before. I would like to know how to fix it myself before taking it to the mechanics. Please help.....

Steph

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I solved this by putting some WD 40 on the Hazard button on the stearing collum. Worked it up and down a few times and everything went back to working again. Saved me a lot of money.

Posted on Jan 23, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 impala rear (passenger side) blinker and brake light wont work... the parking lights work fine. I changed the turn signal light figured that was the problem since the front passanger blinker works...


Any idea's ? Yes , learn how these system's work ! Looking at wiring diagram's to see what all is involved in the electrical circuit's for the brake & turn signal lamps . Plus learning how to test electrical circuit's with a DVOM - digital volt ohm meter .
Electric Testing Techniques You Need to Know
Testing is how to find this problem , not going by someone guessing who has not even looked at the vehicle ! Free wiring diagram's here http://www.bbbind.com/free_tsb.html Enter vehicle info. year , make , model an engine size . Under system click on lighting ,then under subsystem click on stop lamp or turn signals . Take your DVOM an at the rear right stop lamp bulb test for B+ voltage , check ground side . See which side of the circuit has the problem . Mastering Voltage Drop Testing with Pete Meier and Jerry Truglia

Dec 16, 2017 | Cars & Trucks

2 Answers

2001 dodge 2500. Rear brake lights will not work. Center brake light works, blinkers, flashers and tail lights work. No fuses blown.


obviously first check the bulbs. If they are fine, check that a brake light connector is not diconnected. I have seen it once. The connector was used to power an accesory on the rear instead. Also, the connector or bulb sockets could be rusted or loosly connected. Hope this helps.

Jul 12, 2011 | 2001 Dodge Ram 2500 Truck

1 Answer

I cannot get my back up light or my brake light to work. my blinker light and my running light work fine. just the backup lights and the stop lights are giving me problems.


CHECK ALL BULBS IF BULBS OKAY,REASON REVERSE LIGHTS DONT WORK YOU HAVE FAULTY INHIBITOR SWITCH.FOR BRAKE LIGHTS NOT TO WORK,EITHER BRAKE LIGHT SWITCH FAULTY OR TURN SIGNAL BAD,BECAUSE MOST CARS NOW TURN SIGNAL SWITCH AND BRAKE LIGHTS SHARE SAME CIRCUIT.

Apr 01, 2011 | 1996 Hyundai Accent

1 Answer

My 1996 chevy cavalier has no brake lights or blinker lights. I replaced the multifunction switch on the column and the brake stop switch. Still no brake or blinker lights. Third brake light doesn't work...


take a volt meter to the sockets and see if you get any voltage. if you don't, try a continuity test on the socket and see if there are any shorts, blown fuses are good indications of shorts. if you have no voltage and no shorts, you have cut wires somewhere along the lines. i'd say check your relays but if your not getting any voltage at all, it probably won't be relays. check it anyway
hope it helps

Jun 10, 2010 | 1996 Chevrolet Cavalier

3 Answers

Rear blinkers and brake lights on 2001 ford focus not working


yes it sounds like the turn signal switch is defective, the brake lights go through that switch as well.

Sep 06, 2009 | 2000 Ford Focus

1 Answer

HAVE RPLACED BULBS AND BRAKE SWITCH AND HAZARDS WORK FINE AND BLINKERS WORK TOO STILL NO BRAKE LIGHTS


check the bulbs again make sure the brake and signal light bulb has two filaments in it, the parking lights ony has one filament

May 21, 2009 | 1999 Ford Taurus

1 Answer

1982 s10: brake lights, hazards, and blinkers do not work.


YOU MIGHT WANT TO CHECK THE BULBS IN THE REAR LIGHTS THEY OFTEN STOP WORKING IF THERE IS A BURNT ONE . IF NOT THEN CHECK TO SEE IF YOU CAN HEAR THE CLICK WHEN YOU ENGAGE YOUR SIGNAL EACH WAY IT MIGHT BE IN THE STEERING COLOUM WHERE IT CONNECTS TO THE SIGNAL ARM

May 20, 2009 | 1993 Chevrolet S-10

1 Answer

1984 F-150 Brake Lights and Blinkers


on the brake peddle there is a switch when you press the brake peddle..check to see if after you press the peddle it should activate..it could be stuck or out of place...you may need to get a new one..
the blinker you will have to purchase a blinker relay...ask any part store for it...

Feb 16, 2009 | 1984 Ford F 150

Not finding what you are looking for?
1995 Pontiac Sunfire Logo

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

77202 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8755 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...