Question about 2008 Mercedes-Benz Mercedes Benz C Class

1 Answer

Gas gauge reading empty but gas is in tank

I pumped gas and the tank went half way adter driving for about 10 min the gauge slowly went to empty and hasnt moved from their even with gas in the tank

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 234 Answers

There is a sender unit failure. Likely it would need to be replaced.

Posted on Jan 12, 2013

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 4 Answers

SOURCE: My Mercedes SLK320 wont let

Not sure if it's a vacuum issue.... I will just push back the rubber seal and input the nozzle....Then it will dispense the gas....Not sure why..... It only happens at certain gas stations..
Good Luck!

Posted on Sep 14, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

We can't put more than $20 in the tank before it starts to over flow, with the gas gauge on empty when we start pumping. Then the gauge reads 3/4 tank. When it runs down to half it jumps straight down to...


Your fuel pump assembly located inside the gas tank has a float that measures how much gasoline is in the tank. False readings means the fuel pump assembly needs to be replaced.

Jun 27, 2014 | Cars & Trucks

1 Answer

Chrysler sebring gauge


The fuel gage problem is either from a bad ground to the gage or the sending unit in the tank is bad. They will normally read a half tank or less when the car is full if the sending unit goes bad. I would put a scanner on the computer and check for any codes set.

Apr 22, 2017 | Cars & Trucks

1 Answer

Put in new fuel pump and sending unit. but my gas gauge doesnt always work. sometimes is does and sometimes it doesnt


if it worked for a short period of time after doing the pump/sending unit the check the connections going to the pump/sending unit they would have been moved around doing the pump

Aug 11, 2012 | Cars & Trucks

1 Answer

2007 Subaru WRX Fuel gauge does not work porperly. When the tank is topped off, the fuel gauge reads full, but after much driving the gauge only drops to 3/4 a tank and slowly to half of a tank on the...


hi it can really only be two things, first is the fuel sender on the pump inside the tank it could be stuffed or sticking causing a false reading, second it can also be a faulty fuel gauge on the dash.

Apr 15, 2011 | 2007 Subaru Impreza WRX Sport Wagon

1 Answer

My 1992 dodge van fuel gauge stoped working slowly, it read full when i filled it i would drive about 10 miles then it would show empty a few more miles then show half tank then empty now nothing.. always...


i would check wires leading to tank sounds like you have a bad connection or possiably a bad ground wire if connection s look good and your getting good ground more than likely you have a bad sending unit in the tank

Feb 06, 2011 | Dodge Ram B250 Cars & Trucks

1 Answer

At the start of the engine, the fuel gauge reads empty. i know for sure the gas tank is filled up with a decent amount or its full. after afew miles, the gauge slowly moves to its proper reading. i know...


Most cars and truck nowdays show the tank empty when you start it. Then it slowly advances to the correct level of fuel in the tank. You can try and use some fuel additives like Gumout or Valvoline that clean the injectors and other fuel sytem parts. You can get a buildup of tarnish in these parts and this can cause slow readings. If this was the case it should improve after a few tank fulls of gas with the cleaners added. The guage could also slowly be going bad. The newer style guages are connected to the fuel pump and you will need to replace the whole unit if this goes out on you. Keep in mid that when the fuel pump quits, it quits, usually without much advance notice. If the car starts sputtering and does not have full power, this will hint at the fuel pump going bad. If your car has over 100,000 miles on it, you might want to think about preparing to change the fuel pump, these seem to want to go out shortly after 100,000 miles, but you can get lucky once in a while and it can last longer. Keeping your tank at least half full with clean gas is a big help, the gas keeps the fuel pump cool so it last longer!

Nov 16, 2010 | Chevrolet Blazer Cars & Trucks

1 Answer

Have a 2001 gmc jimmy...drove home gas gauge read 1/4 tank..next day cranked over but wont start..gas gauge reads empty...put $10.00 from spare gas can..cranked over but no start ..gas gauge still reads...


chevy and gmc trucks have an on going problem with this,turn the key on,and get a rubber mallot or a hammer and hit the bottom of the fuel tank a couple of times,this will unstick something in the fuel pump/sending unit.

Jan 05, 2010 | 2001 GMC Jimmy

3 Answers

Gas gauge problems


Common problem on the 03-06 Envoy instrument clusters for the fuel gauge to go out. It's usually caused by one of two main problems, either the stepper motor on the cluster's circuit board is going out or the sending unit on the fuel pump is going out. Check out this blog post about the problem - Envoy fuel gauge problems

Jun 13, 2009 | 2006 GMC Envoy

1 Answer

Fuel gauge drop to empty


Sounds like the gas tank sending unit went bad.

Mar 11, 2009 | 2003 Jeep Liberty

2 Answers

2006 GMC Envoy XL gas gauge reads empty after filling, then slowly moves up after driving but will continue to lose pressure until it reads empty and the light is on, then the check engine light came...


Sending unit. Its all one unit including fuel pump, float, ect. The check engine light is because of the high or low resistance in the unit. Let me know if you have already fixed.. You have to drop the tank to get to it also.

Feb 24, 2009 | 2005 GMC Envoy Xl

Not finding what you are looking for?
2008 Mercedes-Benz Mercedes Benz C Class Logo

328 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75117 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...