Question about 2002 Ford Explorer
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
2008 Ford F-150 SuperCrew Cab (without moon roof or rails): How to replace the map light bulbs. First, you'll need a "trim pad remover." It is a tool with a screwdriver handle and the metal part has a 'smooth' forked tongue (see Snap-on Stock#: A177A for picture). Go to the center counsel and "gingerly" work around he counsel and pull down at the same time. The counsil is held in by six snap in tongs. It should remove pretty easily. once down, you'll see where the bulbs are. Unscrew and replace. Now, just line up the tongs and gently bump or hit the pressure points (where the tongs are) and it should snap into place. It should take no more than five minutes, tops.
Posted on Nov 17, 2008
remove hub ,take retaining circlip out and knock it out with a big big hammer supporting it on an old wheel rim and a tree trunk.this job is easy to do but unless you have the right tools entrust it to a garage who will have a nice press .
Posted on Feb 02, 2009
if the third brake light works you will probably need a brake on off switch. the fuse panels on that truck are under the dash near the steering column and under the hood in the power distribution box. both of these panels are identified in the owners manuel.
Posted on Jun 18, 2009
you must remove brakes, then remove axle nut, then remove upper control arm and finally tie rod stabilizer, remove axle from car then bearing can be accessed. this is a difficult job that requires special tools so be careful
Posted on Aug 15, 2009
I just changed my rear turn signal. Really easy. There is two 1/4 inch bolts visible when you open the tailgate. Take both of those out and gently lift the light housing out towards the outside of the vehicle. There is two small clamps on the other side of the fixture that just slide right out when you pull on it. There you go
Posted on Feb 21, 2010
Tips for a great answer:
Jan 10, 2016 | 2001 Ford Explorer Sport
Oct 07, 2015 | Ford Cars & Trucks
Jun 30, 2012 | 2004 Ford Explorer
Apr 17, 2011 | 2002 Ford Explorer Sport Trac
Mar 22, 2010 | 2002 Ford Explorer
Mar 19, 2010 | 2002 Ford Explorer Sport Trac
Apr 19, 2009 | 2002 Ford Explorer
Apr 06, 2009 | 2002 Ford Explorer
Jan 28, 2009 | 2002 Ford Explorer
Jan 07, 2009 | 2002 Ford Explorer
121 people viewed this question
Usually answered in minutes!