Question about Cars & Trucks

Open Question

Code 88 gmc k1500 6.5 td code 88

Posted by on

  • martinrob390
    martinrob390 Jan 14, 2013

    started with error code for tps then changed for code 88 ecu on gmc code reader does it mean replace ecu or can i reset ecu somehow ????



Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Code P0042 on 2004 envoy

This Code can be related to a loose or bad fuel/gas cap. I'd confirm it's tight (a couple 'clicks') and not leaking - ensure you note air escaping when the cap is removed, which is normal.


Jun 14, 2016 | 2004 GMC Envoy

1 Answer

Is the rear end on a 1988 Chevy Scottsdale the same one as used on a 1982 GMC Sierra? Our 82 is leaking and we are not flush atm, but the 88 is down for the count so can be ravaged for parts

Not at all the same the 82 rear diff is either a true 10 bolt gm, or a 12 bolt gm diff these were a lot stronger and standard size diffs made from stronger strength castings and materials also the spring perches were further inboard than the later models due to the frame being much narrower than the 88 the 88 rear diff can be installed but the mounts will need to be moved also the 88 diff is a metric design so lugs, brake lines ,brakes will all be different threads and will give a hassle converting the standard size lines on the 82 over to metric for it to work

Mar 11, 2016 | GMC Cars & Trucks

1 Answer

4X4 Indicator lights not working at all no flashing or anything. Checked fuses and they are good unless there is another I don't know about. Also will not go into 4WD Hi or Low stays in 2WD.

Step by Step Troubleshooting 4wd 4x4 88-98 Chevy GMC ...

? 21:32
Jan 20, 2014 - Uploaded by rwdelling
Step by Step Troubleshooting 4wd 4x4 88-98 Chevy GMC Truck ... flashing indicator lights and then would not shift from 2-4wd atall. .... 1997 2dr Tahoe in Nov and I've been having the same problems all winter. I was getting worried thinking I would have to pay a lot of money to get my 4WD working again.

Jan 03, 2016 | 1997 GMC Yukon

1 Answer

Ok I am wondering if my motor in my 91 gmc 5.7 l b8 is a vortec or a 350 it has throttle body carb and not sure thought if I could interchange it with an older 350 ..

Here, is what I think you are asking. The TBI intake from a 91 will fit the same size engine from 88 to 95. The Vortec didn't come out till 96 I believe. So if your 91 is the original engine then it is not a Vortec motor. If you want to swap your 5.7 with another 5.7 (5.7 = 350) Then the 88-95 should work, Just double check your sensors and locations as the plugs may be different and or in different locations. I know my 88 GMC and my 94 chevy (both K1500's) were a little different. Hope this helps.

Jan 17, 2015 | 1991 GMC Sierra

1 Answer

Does a 88 gmc s-15 have a fuel pressure regulator?

yes any high pressure fuel pump needs this

Jan 23, 2013 | 1988 GMC S-15

1 Answer

My 94 gmc sierra 6.5 td keeps blowing the clutch master cylrnder

It needs a clutch pressure plate force is to great do lining & reface flywheel then good to go for a longggggg time

Sep 01, 2009 | GMC Sierra 2500 Cars & Trucks

1 Answer

I was driveing my 88 gmc jimmy the other day and i

Try replacing the fusible links down by the starter. There are 2 and they look like a round rubber plug. Cut them out and splice the wires together. If they aren't there check the wire splices for corrosion. Use shrink tubeto cover the splices. Hope this helps.

Jun 25, 2009 | 1988 GMC Jimmy

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides