Question about 2004 Mitsubishi Endeavor

1 Answer

No air coming on our feet

Problem with heat and air flow. no heat when driving on highways when temperature is in the minus

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

There is a plastic cylinder that rotates to send the air to the different positions. I had to have mine replaced. It is located up under the dash on the drivers side. The entire dash and everything around it had to be taken apart. The part was cheap but the labor was around $800.

Posted on Feb 06, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

03 Nissan Altima showing codes P0304,P0102,P0154,P0113 what are they and how do i repair the problems.


Hi Chris.

p0304 = Number 4 Cylinder Misfire Detected

Faulty spark plug 4
Clogged or faulty fuel injector 4
Faulty ignition coil 4
Fuel injector 4 harness is open or shorted
Fuel injector 4 circuit poor electrical connection
Ignition coil 4 harness is open or shorted
Ignition coil 4 circuit poor electrical connection
Insufficient cylinder 4 compression
Incorrect fuel pressure
Intake air leak

The P0304 code means that the cylinder 4 is misfiring or is randomly misfiring. Start by checking for intake leaks an if no leaks are found the next step is to replace the spark plugs on cylinder 4.


p0102 = Mass or Volume Air Flow Circuit Low Input

Faulty mass air flow sensor
Intake air leaks
Dirty mass air flow sensor
Dirty mass air filter
Mass air flow sensor harness is open or shorted
Mass air flow sensor circuit poor electrical connection

Before replacing the mass air flow sensor, try replacing the air filter and cleaning the air flow sensor with low compress air or mass air flow sensor cleaner.
Reset code and drive vehicle.
If the code comes back, it may be necessary to replaced the mass air flow sensor.


p0154 = O2 Sensor Circuit No Activity Detected Sensor 1 Bank 2

Faulty Front Heated Oxygen Sensor Bank 2
Front Heated Oxygen Sensor Bank 2 harness is open or shorted
Front Heated Oxygen Sensor Bank 2 circuit poor electrical connection
Inappropriate fuel pressure
Faulty fuel injectors
Intake air leaks may be faulty
Exhaust gas leaks

Replacing the Front Heated Oxygen Sensor Bank 2 usually takes care of the problem.


p0113 = Intake Air Temperature Sensor Circuit High

Faulty Intake Air Temperature (IAT) sensor
Dirty air filter
Intake Air Temperature (IAT) sensor harness is open or shorted
Intake Air Temperature (IAT) sensor circuit poor electrical connection

The Intake Air Temperature (IAT) sensor is built into mass air flow sensor or in some vehicles mounted to the air filter duct housing. The sensor detects intake air temperature and transmits a signal to the Engine Control Module (ECM).The temperature sensing unit uses a thermistor which is sensitive to the change in temperature. Electrical resistance of the thermistor decreases in response to the temperature rise. The Intake Air Temperature signal is used as an input for various systems in the vehicle.



Hope this helps
FYT

http://www.autocodes.com/make/nissan

Mar 26, 2017 | Nissan Cars & Trucks

Tip

Tips for operating Air conditioning system on Toyota Hilux and someother...


To cool off your Toyota after it has been parked in the hot sun, drive with the windows open for a few minutes. This vents the hot air, allowing the air conditioning to cool the interior more quickly.

Make sure the air intake grilles in front of the windshield are not blocked (by leaves or snow, for example).

On humid, do not blow cold air on the windshield. The windshield could fog up because of the difference in air temperature on the inside and outside of the windshield.

Keep the area under the front seats clear to allow air to circulate throughout the vehicle.

On cold days, set the fan speed to high for a minute to help clear the intake ducts of snow or moisture. This can reduce the amount of fogging on the windows.

When driving on dusty roads, close all windows. If dust thrown up b the vehicle is still drawn into the vehicle after closing the windows, it is recommended that the in intake be set to FRESH and the fan speed to any setting except "OFF".

If following another vehicle on a dusty road, or driving in windy and dusty conditions, it is recommended that the air intake be temporarily set to RECIRCULATE, which will close off the outside passage and prevent outside air and dust from entering the vehicle interior.

HEATING

For best results, set controls to;
Fan speed ---- Any setting except "OFF"
Temperature----Towards WARM (red zone)
Air intake ---- FRESH (outside air)
Air flow ---- FLOOR
Air conditioning ---- OFF

For quick heating, select recirculated air for a few minutes. To keep the windows from fogging, select fresh after the vehicle has been warmed.

Press the "A/C" button on for dehumidified heating.

Choose floor/windshield air flow to heat the voltage interior while defrosting or defogging the windshield.

AIR CONDITIONING

For best results, set controls to;

Fan speed --- Any setting except 'OFF"
Temperature --- Towards COLD (blue zone)
Air intake --- (outside air)
Air flow --- PANEL
Air conditioning --- ON

For quick cooling, move the air intake selector to recirculate for a few minutes.

VENTILATION

For best results, set controls to;

Fan speed --- Any setting except 'OFF"
Temperature --- Towards COLD (blue zone)
Air intake --- (outside air)
Air flow --- PANEL
Air conditioning --- ON

DEFOGGING

The inside of the windshield

For best results, set controls to:

Fan speed --- Any setting except 'OFF"
Temperature --- Towards WARM (red zone) to heat; COLD (blue zone) to cool
Air intake --- FRESH (outside air)
Air flow --- WINDSHIELD
Air conditioning --- ON

The outside of the windshield

For best results, set controls to:

Fan speed --- Any setting except 'OFF"
Temperature --- Towards WARM (red zone)
Air intake --- FRESH (outside air)
Air flow --- WINDSHIELD
Air conditioning --- OFF

On humid days, do not blow cold air on the windshield. The windshield could fog up because of the difference in air temperature on the inside and outside of the windshield.

DEFROSTING

The outside of the windshield

For best results, set controls to:

Fan speed --- Any setting except 'OFF"
Temperature --- Towards WARM (red zone)
Air intake --- FRESH (outside air)
Air flow --- WINDSHIELD
Air conditioning --- OFF

To heat the vehicle interior while defrosting the windshield, choose floor/windshield air flow.

on Feb 14, 2011 | Toyota Pickup Cars & Trucks

1 Answer

Low air flow to feet when heat is on ?


Sounds to me that you might have a leak in the line. Those heaters are all Vacume actuated.

Feb 18, 2014 | 2000 Oldsmobile Intrigue

1 Answer

The hot air from the vents begins to cool down when the vehicle is stopped or slows down.


sounds like a possible plugged heater core, restricting the flow of coolant. those require a special tool to remove, quick disconnect, just remove both hose from the heater core and back flush the heater core with a garden hose, NOTICE DO NOT DO THIS WHILE HOT IT WILL BURN YOU, this can make a mess, flush it both ways untill it flows clean and with even pressure, then refill the coolant and road test the vehicle to see if is changed.

Jan 15, 2013 | 2001 Chevrolet Suburban

1 Answer

No heat when stopped for traffic


1-your thermostate is stuck open half way. thermostate is a simple device that made of enlarging metals when heat is applied. it suposed to be in close position to allow engine heat up, when specified temp reached it opens and let it flow and radiator tries to keep coolant cool.when it is broken it stucks or it acts slow or it wont acts at all. in your situation it is stuck open half way. it allows enough water to be heated but flow is limited to heat cabin heater.

2-if there are cabin heater selenoid/selenoids for two different temperature for cabin left and right, on some instance those selenoid valves to adjust cabin heater stuck open or closed like thermostate acts on first case. so heat is not enough to heat up cabin heater.

Nov 18, 2011 | 2005 Chrysler Sebring Conv

1 Answer

Heat does not come out passenger side of the car but comes out drivers side


There is a blend door problem.

---
prev.gif next.gif HEATING AND AIR CONDITIONING Refer to Section 1 for discharging and charging of the air conditioning system. The heating system provides heating, ventilation and defrosting for the windshield and side windows. The heater core is a heat exchanger supplied with coolant from the engine cooling system. Temperature is controlled by the temperature valve which moves an air door that directs air flow through the heater core for more heat or bypasses the heater core for less heat. Vacuum actuators control the mode doors which direct air flow to the outlet ducts. The mode selector on the control panel directs engine vacuum to the actuators. The position of the mode doors determines whether air flows from the floor, panel, defrost or panel and defrost ducts (bi-level mode).

Oct 28, 2010 | 1998 Oldsmobile Regency

3 Answers

04 sentra 1.8 over heats after a highway drive. Pull off the highway and come to light and needle shoots to just under H! Start to drive and needle drops right away. Changed thermostat, did two rad...


Air pocket need the thermostat housing.

Air is not a good conductor of heat.

Park you car on a hill and let the air pocket to work itself out to the cooling system.

A shop will charge $65+ to purge the air out.

Aug 11, 2010 | 2004 Nissan Sentra

Not finding what you are looking for?
2004 Mitsubishi Endeavor Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...