Question about Cars & Trucks

1 Answer

I cant get the back glass open, i hit the button on the dash ,and it sounds like its workin but the glass is not releasing,is their a manual waY TO OPEN IT

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

It depends on the make of your car, some cars have tape drive systems to operate the windows, the tape breaks and the the motor just runs. You can replace the tape quite easily. It is generally an easy fix but you have to remove the door trim panel so that you can see what is wrong.

Posted on Jan 12, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
ndguy2481
  • 251 Answers

SOURCE: Trunk release will not work, but I can open it with my key

inside the trunk near the latch is a switch that kills the trunk remote

Posted on Dec 04, 2008

  • 6 Answers

SOURCE: '89 Park Avenue fuel door will not open

You may find a release for the fuel filler door in the trunk. Look behind the carpet on the side the filler is on and at about the same level.

Posted on Feb 14, 2009

  • 1 Answer

SOURCE: my power hatch release wont open so i cant get my tailgate open

I have the same problem, when I took the door apart I found that there is a plastic extension on the end of cyclinder that moves in and out on that electric motor you hear. Well the plastic extension is broken off and that is what moves the lever to open your window latch. I tryed Krazy Glue with JB weld to fix the plastic piece but the first release of the window it just broke off again so I'll have to order a new one. You can't just order the plastic extension according to Chevy you have to order the motor aswell about $80.00 CAD.
To get the door apart yourself, I just pulled out on the plastic trim on top enough to get a long narrow screw driver down there and you will see a brass like lever in the shape of a L , you want to push that to the left to release the window latch, and then you can unscrew the plastic trim properly and go from there.

Posted on May 15, 2009

  • 1 Answer

SOURCE: TRUNK WONT OPEN WITH TRUNK RELEASE BUTTON ON DASH OR WITH REMOTE

Check for broken wires running from the body to the trunk lid through the rubber boot.When the trunk is closing you can see the kink in the rubber boot.There are 11 wires to supply 1 solenoid so I think Chrysler knew there was problem.

Posted on Sep 04, 2009

  • 5 Answers

SOURCE: trunk does not open using dash button or button on

Check your fuse box, look on the diagram and locate the fuse (10 amp most likely) for the auto trunk. The clicking is the relay, it also operates the keylees entry for the doors.

Good luck

Posted on Oct 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

96 S10 BLAZER 4DOOR FUSE BLOWS OPEING BACK GLASS


Sounds like a short in that circuit; disconnect the horn and try again, if that does not blow the fuse, the horn needs attention, if it still blows the fuse, the motor for the rear glass is the problem.

Jan 26, 2015 | 1996 Chevrolet Blazer

1 Answer

Where is the bonnet release on a smart car 0.7 Pulse 2004


If you are asking about the rear door switch , you can open either by the remote control with the button with the trunk picture , or you should see a button inside the car at the bottom left dash , beside your leg , it will show a truck picture too.

Those two buttons open the glass rear door , and after that you will have to open the door manually by pulling the side levers in the top corners
25364440-f35synmq1vv1efae4phsccdh-4-0.jpg

Jan 11, 2015 | Smart Cars & Trucks

1 Answer

The rear glass on my 2000 chevy blazer won't release to open it what can i do to solve the problem?


there's a plastic actuator inside the tailgate that probably broke or at least came loose. You have to crawl into the back and release it. I ended up having to cut a little piece of carpet in the middle on the top of the tailgate area. Right where it fastens. You can manually release the glass with a screwdriver at that point. To replace the actuator, you need to take off the entire tailgate trim and metal underneath that to get to it. It sounds like a pain but trust me, not having the back glass be able to open or the tailgate area is much worse. It takes about 45 minutes to fix. The actuators are less than $10

Sep 04, 2011 | 1995 GMC Jimmy

1 Answer

Qx56 2004= trying to load a disc but when inserting about 1" of disc in, system said push eject. I pushed eject but then system switched to FM mode. Now I cant switch to CD mode when push CD button....


Sounds like that the cd is jammed inside the players so you could either take the player out the dash and open it up yourself or take it to a dealership/repair shop for them to fix it for you.
Also there might be a small holes located under the cd slot big enough for a pin to release the cd manually?

Jul 29, 2011 | 2004 Infiniti QX56

1 Answer

Opened trunk with the trunk release in car and now the lid will not close tightly or lock


sounds like the latch flipped back to the closed position, have someone hit the trunk release button while you pry it back to the open position whith a screwdriver.

Mar 30, 2011 | Buick Roadmaster Cars & Trucks

1 Answer

Troubleshooting rear lock on 1999 GMC Envoy


There are some mechanical rods in the rear hatch that are probably rusty and you will have to take the inner panel off to acces and clean them to get them moving to operate the lock.

May 09, 2010 | 1999 GMC Jimmy

1 Answer

My sunroof will not close. I can hear the noise


It sounds like the switch has gone bad or that there is something wrong with the track. If you look on the inside of the sun roof you should be able to see four screws. These screws hold the sunroof in place and to the track. Take those screws out and then the glass. If you look down where the track is when the glass is out and push the button to open and close you should be able to see the track move. If you cant see it move when it is supposed to open pull the switch and see if you are getting power to the open and close side of the switch.

Apr 10, 2010 | 2004 Kia Optima

3 Answers

I cant open the glass on my back hatch any suggestions?


The glass hatch release handles fail all the time on these models (which is why the system was eliminated in 2009 models).

The glass hatch handle is $32 list from the dealer.

Removal and replacement requires a philips screwdriver and a 10mm socket and ratchet with extension.

Open the glass hatch by manually activating it through the access hole on the inside of the tailgate (small square panel covering it)

Remove the two philips screws and the one pop fastener holding the plastic trim on the back of the glass hatch handle area.

Remove the two 10mm nuts holding the handle on, unplug the wire and remove, noting the routing of the wiring on removal.

Reassemble in opposite order, being sure to route the wiring correctly.

Oct 29, 2009 | 2004 Mitsubishi Endeavor

1 Answer

2002 chey blazer back glass hatch will not open. The electric switch on dash board and tail gate dosn't work. and has no key hole. Any ideals.


I had this "problem" for a minute till I realized the hatch button will not pop until you UNLOCK the car doors. Hit the remote UNLOCK button and THEN push the hatch button. I hope this helps you !!

Oct 22, 2009 | 2002 Chevrolet Blazer

2 Answers

Chevy blazer 95 with stuck trunk


I was able to get two wedges between the glass and the plastic trim. From that I used a scope to see inside and find the mechanism to release the window. Once I got the glass open, I removed the handle, and two screws from each side of the trim and removed the trim.

Once the trim was removed I had a small opening and could see the problem. The end of the latch has a small blue plastic (why plastic??) catch that broke.

Rather than taking the door apart and finding a replacement, I heated a screw driver and made a slot in the plastic. Next I used a heavy duty zip tie and connected the two pieces (plastic catch and metal part that opens the latch). I left some slack in the connection and all works great.

Not sure how long this will last, but for now I have the back opening. I will look at replacing the plastic piece, but not sure if a total new mechanism is needed.

Thanks
Stan

Sep 04, 2008 | 1995 Chevrolet Blazer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...