Question about 1998 GMC Sierra

2 Answers

1995 GMC 1500 sierra loses power

My 1995 Gmc loses power and spits and sputers i replace the plugs, feul filter, air filter, distributer, ran sea foam in the gas, it is at a mechanice that rebuilt the throttle body but it still does it i purchase it about a month ago and it haasa been stitting for a little while but i really want to get it running good anyone have any ideas? thanks

Posted by on


2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    Visited the website for 3 consecutive days.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 66 Answers

The bad typing is hard to understand.I ll take a stab at it anyway.You replace the plugs,distibuter,feul filter, and the air filter.Did you notice that i dont even care about the sea foam garbage.When you replaced all that stuff did you do the spark plug wires or the rotor or the coil or the fuel pump?Maybe your mechanic needs to make a few extra bucks off that last job he did for you.Good luck

Posted on Jan 22, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Solution #1... your a *******

Posted on Jan 26, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

3 Answers

Ive got 1995 z71 5.7 truck ran fine then made 1500 mile trip up north truck did fine all the sudden it started to miss bad at an idle and pick up and loss of power I changed plugs wires cap rotor and ran...

Pickup coil may be going. Some are difficult to change, however, they are cheap. Also, if after replacing you still have a problem, suspect the computer. If you can remove it, open it up and look inside for a burnt computer chip. Don't forget to inspect all small hoses for cracks.

Nov 22, 2013 | 1995 GMC Sierra

1 Answer

Just replaced my distributer cap and rotor on 1995 gmc sierra v6 1500, Truck ran before that. I know the firing order on the truck and I have the wires in the proper places, but the truck does not want to...

I don't know your problems say like that But I can tell you what to do to check it for good.
first remove spark plug on cylinder 1 place piston on end of compression timing mark to 0. Now you should have the rotor point to number one cylinder. Find wich way the rotor turn and do firing order 1-8-4-3-6-5-7-2 that's it

Sep 20, 2013 | 1995 GMC Sierra C1500

1 Answer

91 Gmc 5.7 spitting and sputering

Check your fuel filter again. Dirt from the tank could have clogged it again.

Oct 24, 2012 | 1997 GMC Sierra

1 Answer

My 1995 GMC 1500 V6 Automatic Transmission will not shift into 3rd gear. I have cleaned the wire plugs and replaced the filter. What could be the problem?

Not sure which filter you are talking about, but you should change the fuel filter if you didn't. I assume your fluid level is good?

Nov 16, 2010 | 1995 GMC Sierra C1500

1 Answer

PO651 code 2004 Sierra 1500 5.3

Go to it is free as long as you click on 2 of the ads at the website then your questions will be answered by an ASE certified mechanic,you don't have to buy or fill out anything on the ads,so help keep the site free.

Apr 14, 2010 | 2004 GMC Sierra

1 Answer

1988 gmc sierra s-15 feul pump/feul delivery system,how it works.

start checking fuel pressure easier then changing pump re check that all is plugged in by air cleaner

Mar 10, 2010 | 1988 GMC S-15

Not finding what you are looking for?
1998 GMC Sierra Logo

Related Topics:

262 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts


Level 3 Expert

77186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides