Replacing interior door handle truck

Hi,
After removing the door finisher, lift the window glass, u will see the interior of the handle. remove the lock linkage by side pushing/pulling the plastic clip of the linkage, and using a 1/4" drive 10mm socket, remove the 2 nut thats holding the handle from the door!
hope that helps u out!

Generally, the interior door panel must be removed to access whatever method the manufacturer used to install the handle. i know this isn't a complete solution, but once you get the interior panel off, the rest should become pretty clear.

Yes you will need to remove the door panel if you can not see the rod that connects to the handle.

You have to remove the door panel, if you have roll down windows the handle will have to be removed. After panel is removed you have to drill the one rivet that hols the interior handle. slide the handle down and unfasten the rod retaining clip. Please make sure you do not break the clip. Install the new interior door handle, clip and provided fasteners. Try the door before you install the interior door panel, Note the is a good time to lube the window roller and the door mechanism. Make sure to install the water shield to provide the protecting from the elements. Line all the plastic retaining clips and or replace if they are broken. Good Luck.