Question about 2005 Jeep Liberty Sport
Door ajar light won't go odd
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: tailgate stuck
The auto lock burned out you need to go to dealer and get ripped off for $300 to have them fix it. Make sure you tell them the exact problem since it took 3 mechanics two days to figure mine out after i told them what was wrong the first time. Not too swift there.
Posted on Aug 15, 2008
It probably will cost a few bucks to get the code reset, but you don't need to go to the dealership, most shops with a good scanner equipped for air bag code reading will be able to diagnose and reset the light. The most probable reason for the code is the battery being dead for a while, there is a capacitor in the airbag circuit to make sure the airbag can go off in a collision even if the battery disconnects itself in the process. There is a slim chance it might be something else but either way the shop should be able to tell you what the problem is, and get it fixed... But, just for fun, before doing all this, i'd disconnect the battery for 30 minutes to an hour and reconnect it back, some systems do effectively reset themselves this way.
Posted on Jan 13, 2009
put the back of car on jack stands and secure the front tires so it does not roll and then remove the bolts off the back of the caliper there is normally two one at top and one at bottom and spray it with some kind of oil for rust and make sure you have the right size socket before you try to loosen them and once caliper is off and the old pads removed take one of the old pads and squeeze the piston on the caliper back in by using a "C" clamp and also remove some of the brake fluid from the master cylinder before you do this put the new ones back on and check the brake fluid and make sure it is full and then pump the brakes to make sure you have a good pedal also put some "No Squeak" brake stop on the back of the pads so they don't squeak they will have that where you buy the pads from
Posted on Mar 01, 2009
brake pedal switch, get a wire, unplug plug, bridge circuit and check lights.
plug and switch is high up on the brake pedal not normally easy to get to.
Posted on Aug 15, 2009
Tips for a great answer:
Feb 13, 2015 | 2006 Jeep Liberty Sport
Mar 21, 2014 | 2005 Jeep Wrangler
Apr 15, 2013 | 2004 Jeep Liberty
Mar 16, 2013 | 2002 Jeep Liberty
Jun 26, 2017 | 2005 Mercedes-Benz Mercedes Benz E320 Cdi
Dec 05, 2012 | 2005 Hyundai Sonata
Aug 28, 2012 | 2006 Jeep Liberty Renegade
Jun 21, 2011 | 2005 Jeep Liberty
Jun 06, 2010 | 2002 Ford F250 Super Duty SuperCab
97 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: