Question about Cars & Trucks

1 Answer

My 06 fusion 600 vibrates really bad and is blowing belts

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 41 Answers

Too little info. By blowing off belts do you mean throwing them off or breaking them? If so check the idler and tensioner pullies. If bearing is worn out it can cause the vibration without causing alot of noise until the bearing totally gives out and locks up. But if it's throwing the belts you definately have a pulley out of line somewhere. Find it and you will probably find the issue that's causing the problem. All pulleys should be tight with VERY little play(back and forth, up and down).

Posted on Jan 12, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to know where and how to change the control arm bushings


here is how to change control arm bushings on an 06 fusion. just type in on pc browser, (how to change control arm bushings on 06 fusion.) then click on 4th link down on page, when link opens, you will be watching it on utube. Good-day!

May 05, 2014 | 2006 Ford Fusion 1.6

1 Answer

In my 06 ford fusion the "check charging system"


Please have the alternator and the battery tested, Autozone does this testing for free.

May 21, 2013 | Cars & Trucks

1 Answer

2010 ford fusion vibration at idle and acceleration.


Chances are its a minor miss in one of the cylinders. You don't feel it neutral at idle or until the trans goes into overdrive because those times the engine is not working very hard.
If it is a miss fire the check engine light will come on when it gets bad enough to affect fuel mileage.
If you have not yet changed the plugs I would start with that. There is also a chance you damaged the engine when it overheated.

Dec 09, 2012 | Ford Fusion Cars & Trucks

1 Answer

06 ford fusion v6 has number 3 cylinder misfire. new coil, new plug still no fire


try switching plug and or coil with another cylinder to see if misfire moves, you might have got a bad replacement part.

Sep 03, 2012 | 2006 Ford Fusion

3 Answers

Why does a 2006 Ford Fusion have a strong vibration when stopped and in Drive?


If there are no check engine lights could be a bad motor mount or two. Would have them checked. Try putting car in neutral and see if vibration disapates a little.

Aug 23, 2012 | 2006 Ford Fusion

1 Answer

I have a ford fusion 06 and it sounds like a grinding rubbing sound and squeaking of the breaks coming from the right front tire! kind of like the break is sticking? i took the tire off and everything...


If you took the tire off and there is no evidence of major wear then you might have a steering knuckle bearing that's bad.They can also sound like the grinding and squealing like bad breaks.The steering knuckle is what everything is attached to.The bearing in the center of the steering knuckle for the axle shaft.

Mar 12, 2011 | 2006 Ford Fusion

1 Answer

Can we use ur product in my ford fusion


Any vehicle, car or truck, you can ask questions here. So, what is your question/problem/concern/ w/ your 06 Ford Fusion?

Mar 16, 2010 | 2006 Ford Fusion

2 Answers

F150 2003 5.4L Vibration throughout truck with acceleration


Have your tires and wheels checked. Sometimes they throw a weight and then you get a vibration. Other times you can have a bad tire and catch it before it blows.

Oct 06, 2009 | 2003 Ford F150 Regular Cab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...