Question about Cars & Trucks

2 Answers

I have a 2006 750li , this is a picture of my ABS security system wires, the dealer told me that i have a shortage problem , is this expensive to fix?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 3,606 Answers

Hello you are looking at, the abs control pump.
It`s very rarely the pump failing, but probably a wheel censor
that must be changed.There is one for each wheel. When this problem occur, the abs system is malfunctioning, because the resistance in the censor is changed, and the system can`t find it`s normal function. Basicly it`s hard to determin what exact cencor is failing, and only BMW can find the problem, because the system ecu has to be set to reset to default. when the fault is repaired.
The car could be dangerous to drive in, because the abs system and the anti skid, esp, etc, is not working before the fault is repaired.

The repair is not that expensive, but an unautoriced repair shop, with speciality in bmw, is always cheaper, try to find a shop you can trust and with a good repair history.

Good luck

Posted on Jan 12, 2013

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Cars & Trucks Master
  • 1,669 Answers

There is really no way to know how much finding an electrical short in an electrical system will cost. You should probably go around and get some estimates, but, as you know, anything that needs repairing on a Beamer will be expensive!

Posted on Jan 12, 2013

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Uplander 2007 "Service ABS System

When that happened to me I needed a new wheel speed sensor it cost around $500. Hope that helps!

Posted on Jan 06, 2010

  • 20 Answers

SOURCE: My 2001 silverado's Security Light is staying on.

You probably need a new key switch. If your keys are really worn, they may need to be replaced also. The security system checks the key to see if it is correct. If not correct, power is not turned on to fuel pump.

Posted on Aug 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Abs PUMP MOTOR CIRCUIT VALVE


told, or did.?
why not do as told.?
this post is confusing, sorry
ESP/ABS is a very complex system.
why are you attempting to out guess such a system.
let them fix it.
or buy a car with no ESP. or ABS.

good luck keeping any chapter 11 company car going
some parts that forever to get for this underdog.

I have one, but when it gets harder, off a cliff it goes
or sell it, busted.
I can fix most things, but not with out parts.

back to your high tech magic like brakes.
1: let them fix it
2: DIY

to DIY you need the special and expensive scan tool.
and the expensive FSM (factory serv. man.)
or go to alldata d o t com and read it all there.
all the steps to diagnosis this is there and in the book.
no need to guess, or wonder its all there.
(assumes you read up on ABS first, not withstanding)

cheers and good luck with ABS.
PS:
why not clean all the wheel sensors first. why not?'

Aug 06, 2013 | Suzuki Grand Vitara Cars & Trucks

1 Answer

Hey I have a 98 volvo v90 wagon. I replaced rotors pads calipers and hoses from brake lines to calipers on the front. Now my abs light is on and when I brake only sometimes I can feel the brakes pulsating....


Hey man The ABS light is most likely a speed sensor out of range. It will not effect normal braking function. You have already spent a ton of money. Chasing an ABS light fault is not cost effective and you wont feel the difference. ABS problems are a dealer only option(expensive). Take that ABS bulb out of the dash and forget about it.

May 15, 2017 | Cars & Trucks

1 Answer

Abs light is on in the swich board


First there is no magic fix for this, generally you need a OBD 11 scanner to identify the fault. Auto Zone I am told do this service for free and tell you what the fault is.
There are however some things that you can check yourself first.
Check your brake fluid levels in the master cylinder.
Check your fuses to make sure that none are faulty.
Check that the wiring connectors to the ABS pressure pump system are properly connected and not corroded.
Check under the car at the four inside wheel hubs that the ABS wheel sensors are in securely in place and that the wires are properly attached and not damaged or lose. Most ABS faults are from the wheel sensors.
Check the wheel bearings to make sure that they do not have any play. This will result in the wheel sensor showing a fault.

May 28, 2010 | 2001 Toyota 4Runner

4 Answers

Average cost to repair the ABS on a Lincoln Mark VIII.


Im sure it will be expensive ,,All cars will resort back to the base brake system, just like a car that didn't have abs so it should be ok as long as there are no fluid leaks in the brake system.

Nov 24, 2009 | 1995 Lincoln Mark VIII

1 Answer

Abs warning light but which sensor is a fault? Have a '99 Vauxhall Sintra 2.2 Diesel (European diesel version of the Chevy Venture) with ABS warning light on and need to fix the problem. However, don't...


I'm sorry to say that on your ABS system there is no cheap or do-it-yourself procedures.
You will need to take to a dealer or a independent garage to have it checked by a technician, he will have to scan the system because there's a lot more than just the wheel sensors that can cause your problem

Oct 02, 2009 | 1999 Chevrolet Venture

2 Answers

Abs light on all the time ,occasional brake light ,traction off light on all the time


I would suggest u take ur vehicle in to a reputable dealer this could be a dangerous situatio should u get into an auto accident.

Oct 02, 2009 | 2005 Chrysler Pacifica

2 Answers

Everythings been fixed but the ABS light still remains on. How do I reset / turn it off?


Remove the negative terminal fon the battery for 5 mins and it should reset.

Jun 23, 2009 | 1996 Chevrolet Corsica

1 Answer

EBCM


No, absolutely not, although the EBCM might possibly be the problem, it is a costly item and 95% of the time is replaced for nothing. Make sure to get the system diagnosed properly, if he can't get a reading from the diagnostic machine, check the abs (EBS) fuse(s), it (they) might be burnt. Then check for fluid level and fluid leaks in the brake system. If these are OK, get the wiring checked to the EBCM for powers, grounds, and data (diagnostics).

Aug 27, 2008 | 2002 GMC Yukon XL

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...