Question about 2004 Hyundai Santa Fe
Rev counter not working
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If your Santa Fe has a V6 engine 2.7L , it sounds like you have an ignition break down happening. You will need to renew all the ignition wires and check the two coils also for arcing .
Posted on Apr 01, 2009
try taking a pin and cleaning the holes on the squirters and if that does not work check the washer pump it is located on the washer fluid tank
Posted on Apr 17, 2009
Most likely the o-ring seal between the torque converter and the transmission is going bad. Get that transmission rebuilt pronto before serious damage is done! But first, have a mechanic drop the transmission pan and look for signs of a very thin silvery film coating the inside of the pan. If found, then the transmission definitely will have to be rebuilt, and the torque converter will also have to be replaced since embedded metallic particles in the old torque converter will eventually come loose, due to wear of the clutch plates within the torque converter, and eat up the rebuilt transmission. Now, here is the deal once the transmission has been rebuilt:
Change the transmission fluid and filter once a year -- no matter what! If you do this, then you should never have any more problems with the transmission.
Posted on Apr 20, 2009
If you live in the US, take it to qany Auto Zone store and thy will read the codes off for you, I would suspect any right thinking competitor would do the same, check if you don't have one near by.
Hope this is of some help.
Posted on Apr 21, 2009
This is from the factory service manual of your car:
There is no onboard programming procedure for this vehicle. This vehicle requires special equipment be connected to the vehicle to program the keyless remote. Translation you need the dealer to do this.
Posted on May 22, 2009
Tips for a great answer:
Sep 27, 2016 | 2007 Hyundai Santa Fe
Mar 20, 2012 | 2001 Hyundai Santa Fe
Sep 05, 2011 | 2002 Hyundai Santa Fe
Mar 23, 2011 | 2002 Hyundai Santa Fe
Feb 08, 2011 | 2004 Hyundai Santa Fe
Feb 20, 2010 | 2001 Hyundai Santa Fe
Aug 27, 2009 | 2004 Hyundai Santa Fe
Jun 15, 2009 | 2002 Hyundai Santa Fe
36 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: