Question about Cars & Trucks

1 Answer

Had flat battery in 99 landcruiser snowy ! Jump started it and now every time u open doors hazard lights flash

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Do an electrical check on ur car security system or device.

Posted on Jan 12, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: won't start after cleaning battery terminals

Sounds like you have an aftermarket alarm with starter disable. By disconnecting the battery the alarm reset and the defualt setting is usually to set the alarm automatically (active arming). You have three options..
A. If you have the key fob that went with the alarm you can disarm the alarm.
B. If no key fob is available you can disconnect the battery again, turn the ignition key to the on position and reconnect the battery. This usually doesn't allow the alarm to set and allows the car to start.
C. Remove the aftermarket alarm system. This is usually the long term fix i recommend if the fob isn't available. Option B should get you going though.

Posted on May 09, 2009

SOURCE: problem with ford explorer alarm imobiliser

You should have a switch under the dash and then just turn it to the off position. If you don't or it doesn't work (like mine) then, there is 2 fuses under the dash, put the key in the ignition and turn it forward, pull one of the fuses out and then start the car that should reset it. Then you should be able to put the fuse back. Sometimes if you put the fuse back before starting it the alarm will just continue to try and reset itself, but not start the car. If that doesn't work I have a mechanic who can pull the whole alarm out and when hes done it would look like nothing has ever been installed. Hes very good. I ended having him take my alarm out when I had the same incident happen after the 2nd time.

Posted on Feb 24, 2009

goofduck
  • 490 Answers

SOURCE: Hazard lights will not turn off!

sounds like you will have to change the switch for the emergency flashers

Posted on Apr 13, 2009

Gort007
  • 1187 Answers

SOURCE: 2000 Buick Regal LS 3.6 - Flashing Dashboard Lights/Wont start

Most likely it is the ignition switch (the key ignition switch) in the steering column ($100 at a dealer).

It may be a loose negative battery ground cable, too.
Check the negative battery cable where it conencts to the engine ground. It may be loose, corroded, damaged, or otherwise not making a good ground contact.

Add a grounding strap ($11 - AutoZone) from the engine to the chassis. That may help, but it's most likely the ignition switch.

Posted on Oct 07, 2009

Onifade
  • 268 Answers

SOURCE: electric fault

You might try removing the battery connectors for five minutes and replacing back.

If the codes do not disappear, please you might have to get a scanner to do that.

Cheers.

Posted on Dec 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2008 Altima with push button start. Why won't the fob unlock doors?


Insert key into and remove it from ignition more than six times in 10 seconds. When the hazards lights will flash twice insert key into ignition and turn to ACC position.
Then push any button on key fob once, the hazard lights will flash twice. Then open drivers door to END.
Should be all working again.

Jun 06, 2015 | 2008 Nissan Altima

2 Answers

Key is off lights are off but headlighs taillights are flashing why?


sounds like your hazard lights are turned on, if not then maybe your alarm playing up or flat battery ,

Mar 04, 2015 | 2011 Honda Ridgeline

1 Answer

Car battery went flat an tried jump starting an didn't work put another battery in an now wont start an hazard light an all other lights are flashing


Battery went dead or replaced, it set the alarm. Some alarms can be reset with the key, some with a scanner, some at the dealer. Year, make , and model would be helpful.

Dec 21, 2014 | Cars & Trucks

1 Answer

How do I stop the hazard lights randomly coming on while driving


Maybe you need a new battery

Did you have it tested

Do you know how old it is
or how many times it went flat

Aug 16, 2014 | 1994 Hyundai Excel

2 Answers

I have 2004 toyota landcruiser, the battery is dead and I cannot get in to open the bonnett/hood to jump start it. The key will not open the door either. Is there any way to open the hood from the outside?


I am not sure this will work on a landcruiser. I have never worked on one. I had a friend who had a car with no door handles just electric latches. He left his lights on one day and could not get in. We jacked the car up, put stands under it, and hooked a booster pack to the starter and a good body ground. This supplied the car with enough power to open the doors so we could jump the thing and get the battery back up.

Sep 08, 2010 | 2004 Toyota Land Cruiser

1 Answer

Hazard warning lights won't stop flashing


this sounds like the alarm system is going off,try unlocking from the pass/side door and if lights dont flash then you have a bad lock switch in the door.

Jun 18, 2010 | 1994 BMW 3 Series

1 Answer

Car used 2 days ago fine. Went to start today and the remote only opened the driver door. Put key in ignition and hazards went off then made a clicking noise when tried to turn over and the lights on the...


Yes, this sounds like a flat battery. You could try to get a jump start off someone else, so that you know it is definately not the engine. Otherwise, purchase a new battery and you should be fine.

Jul 25, 2009 | 1999 BMW 328 Series

1 Answer

My son was listening to the car radio with the engine off for a couple of hours and as a result the car would not start. When you turned the key all you heard was a click, click, click. We tried to jump...


First shoot your son. It is not the fuseable link, when a fuseable link blows you get no power at all to anything. I suspect you have a security system that needs to be reset.

Apr 20, 2009 | 2002 Toyota Corolla

1 Answer

Truck won't start, new battery, lights keep flashing


Sometimes the new battery is not 100% charged. Put it on a charger or jump start the car, the alternator should then charge up the battery.

Oct 09, 2008 | 1993 Toyota Pickup

1 Answer

Keyless entry keylob want lock or unlock doors or trunk.change battery and checked all fuses.


You need to program the remote. Get in to the car and LOCK all doors with the switch on drivers side door. Take the key and insert it into the ignition cylinder in and out 6-10 times, until the flashers/hazards flash on your dash board. Or just keep putting the key in and out (nice and easy now, not fast) until you see the lights on dash flash. After the lights flash, turn the key into ACC mode to make the whole dash light up.(do not start car) .With the key in ACC position, hit any button on remote, that will make the hazards flash again. Turn key off and unlock door with switch again. Open door.DONE.
Good luck.

Jul 15, 2008 | 2001 Nissan Altima

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...