Question about 2001 Lincoln Continental
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
you need to find which pulley is the belt tensioner. use a socket and a breaker bar to lift the tensioner. once the belt loosen, slide the belt off one of the pulleys close to you. then slowly release the tensioner.
Posted on Oct 31, 2009
Have you burped the system? If air gets trapped it can prevent the thermostat from opening and make your engine overheat. To get the air out, start with a cold engine, turn the heat on vent or floor only and run full blast, run the engine with the radiator cap off until it gets to operating temperature. Keep an eye on the coolant level and add as needed until it doesn't drop in level for five minutes. Some cars may require removal of the thermostat so you can drill a small hole in it to allow air to escape from the engine side of the thermostat. Keep any eye on the temperature gauge to make sure you don't over heat it while trying to burp it.
Posted on Nov 17, 2010
i would say to check your water pump then if dosent work i would say you have to do you head gasket i had that problem before but my problem was on a honda civic so its was easier but good luck
Posted on Jan 03, 2011
Tips for a great answer:
Feb 06, 2016 | Lincoln Cars & Trucks
Oct 25, 2014 | 1996 Lincoln Continental
Oct 01, 2014 | 1998 Lincoln Continental
Jan 31, 2014 | 1999 Lincoln Continental
Dec 11, 2012 | 1997 Lincoln Continental
Jan 03, 2011 | 1998 Lincoln Continental
Aug 31, 2010 | Lincoln Continental Cars & Trucks
May 24, 2010 | 1998 Lincoln Continental
96 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: