Question about 2007 Chevrolet Malibu Maxx LTZ Hatchback
How do get the washer fluid reservoir out of a 2001 chevy malibu
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
if i am not mistaken it uses the same reservoir as your windshield washers. if its not working it may be plugged or malfunctioning.
Posted on Mar 13, 2009
There should be a fill cap locate drivers side down on top the drive axle. Check your book or call auto parts store for capicity
Posted on Apr 11, 2009
the only solution acording to the manual is to replace the reservoir... not much to say about that, u do have the option to patch it...be careful with the product u use to glue that patch.
Posted on Aug 21, 2009
with just a fluid and filter change it is 7.4 qts. heres how to check it!! jack up car get it as level as possible, start car and let run, get under car when running and take out the plug just in back of tranny pan. if car is not running you will lose fluid, so make sure its running. before removing plug, go thru all gears and end back in park, if fluid just seeps out you are ok!! if it pours out it is to full.place pan to catch fluid,to add the red cap on top of tranny under hood on drivers side about 2 feet down, it is under exhaust on v6. use a tranny funnel to reach hole to fill.
Posted on Sep 16, 2009
Tips for a great answer:
Feb 05, 2015 | 2005 Chevrolet Chevrolet Malibu MAXX LS
Mar 13, 2012 | 1999 Chevrolet Malibu
Open the hood of your 1998 Chevy Malibu and locate the brake fluid reservoir. On a 1998 Malibu, it's located on the driver's side closest to the front windshield. Open the reservoir tank and place the cap in a safe place where it won't get lost. Fill it to the fill line and not above then replace the cap and your done. Now you need to figure out where the brake fluid is going since this is a closed system and if it is low then your brakes are getting worn and more fluid is accumulating in the lines due to more travel of the brake cyclinders or you have a leak. The master cylinder should look like this picture, if you find this helpful, a vote with the thumbs up would be appreciated
Jul 15, 2011 | 1998 Chevrolet Malibu
Jun 25, 2011 | 2004 Chevrolet Malibu
Mar 09, 2010 | 2001 Chevrolet Silverado 1500
Dec 12, 2009 | 2001 Chevrolet Malibu
Aug 21, 2009 | 2001 Chevrolet Silverado 1500
Jan 28, 2009 | 2001 Chevrolet Malibu
190 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: