Question about 2002 Kia Spectra

Open Question

2002 kia spectra o b d 2 codes p0741 p0742

Tranny slips on take off in drive and reverse

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: transmission slip

cool that nice .

Posted on Sep 03, 2008

Ad
  • 8 Answers

SOURCE: 2002 Kia Spectra Transmission Fluid Check

located on driverside below the fuse box close to the firewal

Posted on Dec 22, 2008

  • 2 Answers

SOURCE: Radio Code

hit 1111 then hold the sel button 4 a sec and it should say good and turn on mine did that bink stuff bro bro

Posted on Apr 09, 2009

seans46
  • 161 Answers

SOURCE: 2002 KIA spectra exhaust manifold

The exhaust manifold is right there as soon as you open hood , first disconnect neg batt cab, then jack up car remove bolts that hold pipe to manifold together , unplug any o2 that is in the way and that could get damaged. now from the top take shield off then take manifold bolts out. you might want to spray them with pb blaster and let set a few hours sense exhaust bolts love to break. Remember to use new gaskets installing new one.

Posted on Jun 09, 2009

  • 57 Answers

SOURCE: 2003 kia spectra check engine code p0604

I have bad news for you
p0604 is a transmission control module

check the connection at the transmission control module if there are no connection issues than you will need to replace the transmission controll module "tcm" there is no other test for that code.

good luck

wesleyschacht@hotmail.com

Posted on Jun 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Car will start but put it in gear engine will die


engine starts with no problem; but, when I put in gear and ...

www.cargurus.com > Questions > Hyundai > Sonata

CarGurusNov 15, 2012 - The engine just fall dead when you step on the gas; it seems to jerk before ... My car does the same thing but i put it in neutral n it starts up. ... I have a 2004 kia optima it jerks when I go into reverse it was driving ... start and run fine butwhen I put it in drive or any other gear it dies! ... 2002 Hyundai Elantra GT.

Engine stalls when tranny put in Drive or Reverse - Kia Forum

www.kia-forums.com/kia-carnival...2002.../43407-engine-stalls-when-tr...

Feb 28, 2008 - 10 posts - ‎3 authors
Give it a little gas before putting in D or R and it will go. .... When I start the van cold and shift the tranny into drive or reverse.....the whole front ... won't run in forward gears - Kia Forum
10 posts
May 25, 2012
Intriguing problem - engine rough idle & hesitation ...
10 posts
Aug 31, 2011
2006 Kia Spectra engine stalls and bad idle, cleaning the ...
10 posts
Aug 30, 2010
2002 Kia Spectra Won't Go Out of Park - Kia Forum
3 posts
Oct 28, 2008
More results from www.kia-forums.com

Dec 17, 2015 | 2002 Kia Rio

1 Answer

While driving my car over drive light comes on in a few min. the car dies


Does it die at stops or with foot off throttle and coasting? The overdrive light coming on like that is the transmissions equivalent of the engine check engine light. Fault has been detected and code stored. Would suspect with information provided that the torque converter clutch is locking up but not releasing. You may be able to have this code retrieved with an OBD2 scan tool or at local parts store. You are looking for codes in the 700 range as these are all transmission related codes. ie P0741 or P0742. The P0742 is for torque converter clutch stuck on. P0741 is TCC stuck off

Oct 24, 2015 | 2000 Mazda Protege

1 Answer

2002 Kia spectra automatic trans gears keep slipping could it be the TCM? Or the input and output speed sensors?


First I would check the fluid level and color/clarity. And if not done, or if you don't know if/when, do a tranny service. That means drain the old fluid, remover tranny pan and clean it, with special attention to the built-in magnet. Replace the filer and pan gasket. Refill it to proper amount per specifications. A Chilton/Haynes repair manual for this make/model/year will lead you through the procedure. It also gives the timetable for when it should be done as part of general maintenance. There is also a troubleshooting section where you look at symptoms and it gives list of possible causes. You can get these repair manuals at local parts stores or Walmart.

Mar 07, 2015 | 2002 Kia Spectra

1 Answer

2002 kia spectra will not go in reverse it will go in drive


It would help to know if it is automatic or manual, did it happen suddenly or have problems prior that led up to this?

Feb 11, 2015 | 2002 Kia Spectra

1 Answer

Service engine light is on the p0741 code poped up on 2002 grand prix se


Hi there:DTC P0741 - Torque Converter Clutch (TCC) Excessive Slip, Transaxle Chuggle, Slip/Surge (Inspect and/or Replace Various Internal Transaxle Components


There is some service info, that may very well be your problem. here is the info...


Subject: Incorrect Transmission Shifts, Poor Engine Performance, Harsh 1-2 Upshifts, Slips 1ST and Reverse, Torque Converter Clutch (TCC) Stuck Off/On, DTCs P0730, P0756, P0757, P0741, P0742 (Clean Transaxle Valve Body and Case Oil Passages of Debris)


Models: 2001-2005 GM Passenger Cars with 4T65-E Automatic Transmission
2001-2005 Buick Rendezvous
2005 Buick Terraza
2001-2004 Chevrolet Venture
2005 Chevrolet Uplander
2001-2004 Oldsmobile Silhouette
2001-2005 Pontiac Aztek, Montana
2005 Saturn Relay
with 4T65-E Transmission (RPOs M15, MN3, MN7, M76)


Some owners may comment on any one or more of the following conditions:

* The SES lamp is illuminated.
* The transmission slips.
* The transmission does not shift correctly, is very difficult to get the vehicle to start moving or the engine lacks the power to move the vehicle.
* Poor engine performance.


Cause
The most likely cause of the various conditions may be chips or debris:
* All years--Pressure Reg. Valve (Bore 1) or Torque Signal Valve (Bore 4) stuck.
* On 2001-2002 vehicles, a plugged orifice on the case side of the spacer plate.
* On 2003-2005 vehicles, restricted movement of the 2-3 shift valves in the valve body.
* On 2003-2005 vehicles, restricted movement of the 3-4 shift valves in the valve body.


Technician Diagnosis and Correction
* The technician's road test reveals the vehicle launches in third or fourth gear (high RPM with slow vehicle acceleration).

* On 2001-2002 vehicles, a DTC P0756 or P0757 may be stored.
* On 2003-2005 vehicles, a DTC P0730, P0741, P0748 or P0757 may be stored.
* Refer to the appropriate Service Information (SI) for additional Diagnostic Assistance.
* With a Tech 2 connected to the vehicle, road test the vehicle and perform the following steps:
If the above symptoms are present proceed with the following steps.
With the valve body removed and on a workbench, carefully push the valve against spring pressure to check if the valve will snap back to the original position. Or for the valves seated in home position, use a small flat-bladed screwdriver and carefully pry the valve off its seat, quickly remove the screwdriver allowing the valve to return to its seat. If the valve does not snap back unencumbered, then the valve will need to be removed from the valve body.
Once the valve is removed, inspect for any scratching or scoring.
If any scratching or scoring is found, then the fingernail test will need to be performed.


Important: It has been found that in most cases that the scratches are not severe enough to catch your fingernail.
Using your fingernail, move over any scratches to see if your nail will catch on the scratch or score.
* If your nail catches in the scratches, the valve will need to be replaced.
* If your nail does not catch in the scratches, continue with the next step.


Important: Clean the valve body with the machined side down so debris may escape.
Clean the valve and bore using brake cleaner.
Blow off with shop air.
To verify free movement of the valve, dip the valve into clean ATF and install the valve back into the appropriate bore. The valve should move freely. If the valve moves freely, in most cases the valve body will function properly when reinstalled.
Reassemble and retest .



3_4_2013_10_26_03_pm.gif

(1)Bore 1, Pressure Regulator (Reverse Boost Valve inside bushing)(2)Bore 2, 1-2 Shift Valve, Solenoid "A"(4)Bore 4, Torque Signal Valve, Pressure Control Solenoid(5)Bore 5, Pressure Relief Valve(6)Bore 6, PWM and TCC Control Valve(7)Bore 7, TCC Regulator Apply Valve(11) Bore 11, 3-4 Shift Valve, 4-3 Manual Down Shift Valve(12) Bore 12, 2-3 Shift Valve, 3-2 Manual Down Shift Valve(14) Bore 14, Secondary 1-2 Accumulator Valve(15) Bore 15, 2-3 Accumulator Valve, 3-4 Accumulator Valve(16) Bore 16, Solenoid "B"


Hope this helps.

Mar 04, 2013 | 2002 Pontiac Grand Prix

2 Answers

2004 kia spectra new trans & torque converter code po741 after install why


it could be wiring fault, check connections and for damaged or trappet wiring,or it can be torque convertor clutch solenoid

May 28, 2010 | 2004 Kia Spectra

1 Answer

2002 kia spectra wont catch when put in reverse, all other gears work except reverse


this means the reverse clutch band has failed, this conditon will require the trans be removed from the car and rebuilt.

Mar 02, 2010 | 2002 Kia Spectra

1 Answer

How do I repair a problem with the code p0742?


Hey marcarhernan

This code is set when there is a variance in speed from the transmission input and output shafts. It can be a simple sensor issue or a more complex internal problem. There are several recalls for VUE transmissions but I do not think yours falls under this problem. Yours sounds more like an internal belt issue which Saturn has a technical bulletin for as shown below. This usually requires replacement of the case cover and filter and sometimes the belt depending on the damage. This is the bulletin that has to do with your code;

Bulletin No.: 04-07-30-024E
Date: June 09, 2006
TECHNICAL
Subject:
No Movement in Drive or Reverse with or without DTC P0741, P0742, P0841, P1756, P1758, or P1882 (Replace Case Cover Assembly and Filter) Models:
2002 Saturn VUE - Retrofitted with a 2003 or 2004 VT25E (VTi) transaxle (RPO M16/M75)
2003-2004 Saturn ION
2003-2005 Saturn VUE
with VT25E (VTi) transaxle (RPO M16/M75)
Supercede:
This bulletin is being revised to add additional Correction information. Please discard Corporate Bulletin Number 04-07-30-024D (Section 07 - Transmission/Transaxle).
Condition
Some customers may comment on the vehicle not moving in the "D" (Drive) or "R" (Reverse) gear selection positions. In many cases, the transaxle will also produce an audible grind or whine noise when attempting to operate in drive or reverse. The Service Engine Soon (SES) telltale may be illuminated with DTCs P0741, P0742, P0841, P1756, P1758, or P1882 set.
Cause
This condition may occur when the VT25E transaxle belt has malfunctioned.

May 14, 2009 | 2002 Saturn VUE

Not finding what you are looking for?
2002 Kia Spectra Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...