Security code on peugeot 306 has shut down the car!
Whent to type in the code to power up the car and got it wroung as it didnt seem to bleep so i pressed again and now the car wont start and wont let me put in any codes so its shut down in till its reset how do i do this myself with out paying a wack for it?
please help :(
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
We don't have access to radio codes because they are secure information. You will need the serial number off the paper tag on the radio and the VIN of the vehicle, then either see the local dealer or go to radio-codes.com. Some radio's will display the serial number of the radio by using a special sequence of controls on the radio. radio-codes.com will instruct you on how to do this if your car has the ability. There is a charge for this information.
hello it sound like ign switch to me if you check voltage at key swictch going in at out when you turn the key to crank if you dont see power on cramking wire then its defently the swicth the thats were i would start hope this helps Thunderboltz
radio is made by CLARION and the only CLARION code available for free (using a
serial number ) from anywhere on the Internet is if your radio also has a BARCODE SERIAL NUMBER beginning with C7000000
+ + + +on a label somewhere on the
If not then it will only be available from your Main Dealer or a Decoding Service or your
local Car Radio / Audio Store who will connect a laptop to read/recode the
memory chip (EEPROM)
get in the car and shut the door
press and hold the milage reset button
switch ignition on and it will count down from 10 to =0
when it gets to 0 take your finger off the button and switch off ignition
this should reset service light