Question about 1998 Mercury Sable

1 Answer

How to remove starter for mercury sable - 1998 Mercury Sable

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 74 Answers

First remove the negative battery cable then locate the starter it will be on the side of the engine by the trans then you will need a 13mm and or a 15mm socket to remove the starter bolts and a wrench to remove the wires then put it back in the same way you took it out last thing you do is hook the negitive cable back up

Posted on Jan 12, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 958 Answers

SOURCE: Where is the starter located on a 1993 mercury sable engine

trace the big cable that came from the positive terminal of your battery. at it's end is the starter.

or if it passes trough a big relay, then there is another big cable from that relay that would go down to the side of the engine, either left or right, that would be the starter.

tnx 4 using fixya,

drcool

Posted on Oct 04, 2008

  • 718 Answers

SOURCE: i need to change my starter on a 1991 mercury sable

Starter are one of the easier mechanical engine parts to change.

1) DISCONNECT THE BATTERY.
2) Disconnect the electrical cable running to the solenoid on the starter.
3) Remove the two bolts holding the starter in place.
4) Pull the starter out.

To install another starter, do the above steps in reverse order in reverse.

Posted on Apr 04, 2009

baccardo
  • 150 Answers

SOURCE: removal of 97' merc. sable headrest

lift headrest all the way up then insert a pic in the tiny hole on the left column

Posted on Apr 18, 2009

  • 1 Answer

SOURCE: Remove the right rear door panel in a Mercury Sable

Removed two screws from the perimeter of the door, one in the back edge and the other under the bottom. Remove one screw from the handle cup where the window switch is located. Placed some tape around the edge of the handle cup for protection against scratches and pried the cup out with a small putty knife. It is hard, but will pop out. Next I taped the paint around the door panel and used a flat bar to reach behind the panel and had enough of a gap to see the orange tabs and pried each one to remove the panel completely. The panel does not need to be lifted up to removed, just pull it straight off the door. A few tabs may still be holding, but will pop off with a bit of pressure.

Posted on Oct 08, 2009

  • 5 Answers

SOURCE: installed starter and new battery. just hear

could be abbdix in nmthe starter ,take starter off and take back to parts store and swap for another starter try this first

Posted on Nov 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What am i missing? no power to starter selenoid.


is the immobilizer off ? any other device that stops power to start or run the engine. modifications alarm upgrades etc these can all stop the power to the starter. even ecu being switched off as ecu has a shunt so it can handle the power drain when engine is being started.

Jun 28, 2017 | 2001 Mercury Sable

1 Answer

How do I remove the starter


disconnect the battery. Crawl under the vehicle. Remove the large cable from the starter. Remove the small wire from the starter. remove the 2/3 bolts that hold the starter to the transmission. Remove the starter.

Jan 07, 2016 | 2002 Mercury Sable

2 Answers

Can't get at top bolt of 1992 Mercury Sable starter to remove it.


3/8th drive socket set with extra extensions and a universal

Dec 26, 2010 | 1992 Mercury Sable

1 Answer

How to replace positive cabel on 1996 Mercury Sable


Remove negative cable from battery than remove positive cable from battery. jack car on passenger side make car safe by putting jack stands under car . remove positive cable from starter solonid. to do this you will need an open end wrench set usually five sixteenths on battery and nine sixteenths or five eights wrench on solonid. please leave positive feedback if you find this helpful.

Dec 21, 2010 | 1996 Mercury Sable

1 Answer

I need to know where the starter is located on a 1999 Mercury Sable. I'm told I can "bang" on it with a hammer to get it to start long enough to drive it to a mechanic. New battery last...


The starter location is as follows:--- The starter is an electrical motor that provides a jolt of energy to ignite sparks needed to crank an engine.
  • First unplug the negative cable of your car battery for safety reasons.
  • Then remove the 10 bolts underneath the front of the vehicle to remove the splash guard. There are five bolts in the front, three in the center and two on each side.
  • Remove the electrical connectors attached to the starter motor. They are connected by tabs and can be easily removed with your hands.
  • You can use the socket wrench to remove the bolts to loosen starter motor. The starter motor will slip right off as the screws are removed.
This will help.Thanks.Helpmech.


Nov 12, 2010 | 1999 Mercury Sable

1 Answer

Installed starter and new battery. just hear knocking sound from starter. engine is not turning over. car is a 2002 mercury sable.


could be abbdix in nmthe starter ,take starter off and take back to parts store and swap for another starter try this first

Nov 08, 2009 | 2002 Mercury Sable

1 Answer

Starter solenoid - how to replace


Section 03-06: Starting System 1996 Taurus, Sable Workshop Manual REMOVAL AND INSTALLATION Starter Motor Removal
  1. sth~us~en~file=ani_caut.gif~gen~ref.gif WARNING: WHEN SERVICING STARTER MOTOR (11002) OR PERFORMING ANY MAINTENANCE IN THE AREA OF THE STARTER MOTOR, NOTE THAT THE HEAVY GAUGE INPUT LEAD CONNECTED TO THE STARTER SOLENOID (11390) IS HOT AT ALL TIMES. MAKE SURE THE PROTECTIVE CAP IS INSTALLED OVER THE TERMINAL AND IS REPLACED AFTER SERVICE.
    Disconnect the battery ground cable (14301). Refer to Section 14-01 .
  1. Raise the vehicle on a hoist. Refer to Section 00-02 .
  1. sth~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: When disconnecting hardshell connector of the engine control sensor wiring (12A581) at S-terminal, grasp the plastic shell and pull off. Do not pull on wire. Be careful to pull straight off to prevent damage to the connector and S-terminal. If any part of the connection is damaged, replace the damaged components.
    Disconnect engine control sensor wiring and starter battery cable from starter solenoid.
  1. Remove upper and lower retaining bolts.
  1. Remove starter motor.

Apr 09, 2009 | 1995 Mercury Sable

1 Answer

I need to change my starter on a 1991 mercury sable


Starter are one of the easier mechanical engine parts to change.

1) DISCONNECT THE BATTERY.
2) Disconnect the electrical cable running to the solenoid on the starter.
3) Remove the two bolts holding the starter in place.
4) Pull the starter out.

To install another starter, do the above steps in reverse order in reverse.

Apr 04, 2009 | 1991 Mercury Sable

1 Answer

Where is the starter located on a 1993 mercury sable engine


trace the big cable that came from the positive terminal of your battery. at it's end is the starter.

or if it passes trough a big relay, then there is another big cable from that relay that would go down to the side of the engine, either left or right, that would be the starter.

tnx 4 using fixya,

drcool

Oct 04, 2008 | 1993 Mercury Sable

Not finding what you are looking for?
1998 Mercury Sable Logo

Related Topics:

229 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

fordexpert

Level 3 Expert

5546 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...