There is spark on the coil but not on plugs changed the ditrubitor new module but still now spark
Check to see if the spark is strong with a spark tester if it is replace the spark plug wires
Testimonial: "thanks"
If ignition coil getting power.plugs wires been replaced engine still not firing problem in the SPEED SENSOR. CAMSHAFT SENSOR OR ECM.need let dealership do diagnostic test.
SOURCE: no spark at plugs but spark at coil with new ign module and picku
Check the coil wire from coil to distributor cap.
SOURCE: 88 nissan truck wont start
I traced a similar problem in my truck to a rubber bumper on the clutch pedal which had disintegrated so the disengage switch was not being closed, preventing the ignition from working.
I bent a piece of aluminum flashing to contact the switch when I push the pedal to the floor and it works every time.
SOURCE: i have a 99 grand am SE 2.4 4 cylinder and my
A misfire doesn't always have to be ignition... it's just the most common cause. Faulty or plugged injector, low compression. You need to check fuel pressure and test the fuel injector flow. Then check compression. If you don't have tools for these tests, take it to someone who does. Testing is much cheaper than throwing parts at the problem.
184 views
Usually answered in minutes!
×