Question about 1992 Isuzu Rodeo

Open Question

Need a alternator bracket for 92 rodeo v6

Alternator bracket

Posted by Anonymous on


4 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 3113 Answers

SOURCE: 2000 Rodeo, electrical issues, 3.2L V6

Yes, I worked for an Isuzu dealer on the mechanics counter and this was a problem. You might try to have the old one repaired locally or get a Beck-Arnly rebuilt unit. Had good luck with those.

Posted on Jun 13, 2009

  • 523 Answers

SOURCE: i have a 92 isuzu rodeo v6 is it a chevrolet

Yes, Isuzu used the chevy 2.8 liter V6 in its earlier models. Same motor found in the chevy Celeberty.


Posted on Oct 10, 2009

  • 15 Answers

SOURCE: Is the 1994 Isuzu Rodeo

No, not at all. The compatible parts will come from the 1996-1997 Isuzu Rodeo. Also compatible is the 1996-1997 Honda Passport. They must have the 3.2L engine for the parts to fit.

Posted on Aug 21, 2012

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where is the bracket for the alternator of an 1998 isuzu rodeo v6 3.2 located?

Your alternator is Located On Passenger Side Down by the Front Passenger Tire It's a Pain to Change it .

Mar 27, 2016 | Isuzu Cars & Trucks

1 Answer

Alternator diagram for 2002 Isuzu Rodeo

Does anyone know the sizes of the bolts that bolt the alternator to the lower bracket and the lower bracket to the block? Someone has put a slip style lower bracket on my trooper as if I would have to adjust the belt tension manually and I am not too keen about that. I have bought a lower bracket but it did not come with the bolts.

Dec 04, 2012 | 2002 Isuzu Rodeo

1 Answer

Being mechanically challenged, where is the started located on the 92 isuzu rodeo/ v6 5 spd 4 wheeldrive

have thee same vehicle, just went through this ...starters located left hand side, bell housing, right under exaust manifold. Its small, two bolts hold it in, very easy to remove

Nov 21, 2011 | 1992 Isuzu Rodeo

1 Answer

What do i need to remove so i can get the starter motor into its place on a 2004 holden rodeo

if V6 you need to support engine with jack remove left engine mount and bracket via left wheel arch area then can remove starter motor from same point.

Nov 03, 2009 | 1994 Isuzu Rodeo

1 Answer

I have a 92 isuzu rodeo v6 is it a chevrolet engine

Yes, Isuzu used the chevy 2.8 liter V6 in its earlier models. Same motor found in the chevy Celeberty.


Oct 10, 2009 | 1992 Isuzu Rodeo

1 Answer

Are there any other alternators compatible with a 94 Isuzu Rodeo such as an Isuzu Trooper or another make/model? If so up to what year?

On a v6 it must be off of a rodeo v6 only from 11-92 thru 11-95. If you get an aftermarket alt. get a beck arnley brand , others do not work. Try to get your rebuilt at a place that rebuilds alts. and starters locally.

Jul 18, 2009 | 1994 Isuzu Rodeo

1 Answer

Where can i find the wires for the tempreture guage in my 92 rodeo in the engine bay

If your rodeo is the 92 with the V6 its on top of the engine, you need to specify the year and engine.

Jul 11, 2009 | 1993 Isuzu Rodeo

2 Answers

Replace the alternator on a 97 isuzu rodeo

from Yahoo answers
The alternator is located on the passenger side of the motor at the bottom. There is a bracket attached to the motor and the alternator. You need not take the bracket off to remove the alternator. Two bolts hold the alternator to the bracket. One bolt is on the front top of the alternator and one bolt is located on the bottom front of the alternator. The bottom front bolt is attached to the tension adjustment for the alternator. Loosen the tension screw then remove the bolt going through the tension adjustment. After you loosen the top, front bolt, the alternator should be loose enough to move side to side. Remove the top, front bolt. Now you must disconnect the alternator from the power supply. Behind the alternator is a screw with a wire attached via nut. Remove this wire. Nextly there is a series of wires with a plug on the end. It is plugged into the side of the alternator. Uplug this item. You can also access both of these from the passenger side front tire well. Something to consider is that remanufactured alternators in Rodeo's as well as the Honda Passport (which has the same engine as the Rodeo) do not work and the problem(s) associated with a bad alternator,ie; not charging, no fan blower, battery light and brake light on, still exsist after replacing alternator with reman. Use a factory original alternator if possible. It will cost a little more than a reman but will most likely save you a lot of time and headache!

Hope this helps you out!!

Sep 29, 2008 | 1996 Isuzu Rodeo

Not finding what you are looking for?
1992 Isuzu Rodeo Logo

Related Topics:

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts


Level 3 Expert

78936 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14406 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides