Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
the flasher is behind the dash where the steering column goes. It's hard to get at and harder to remove. They just can't make these things easy, can they?
Posted on Dec 02, 2008
SOURCE: replacement of heatercore
I believe you have to dissassemble the lower part of the hvac unit under the dash to gain access to the heater core, then disconnect the hoses at the firewall and remove the heater core.
Posted on Jul 30, 2009
You will need a piece of pipe about 2" to 3"long that will fit inside the diameter of the two heater hoses at the firewall and two hose clamps. (1)disconnect the two hoses at the firewall; (2)slip a clamp on each hose; (3)slip the piece of pipe into both hose ends to connect the two hoses together; (4)install and tighten clamps on each end of hoses over pipe. (You might want to put a little grease on the pipe for easier removal when you are ready to install new core.) Start engine and check for leaks at the connections.
Posted on Nov 06, 2009
SOURCE: replace heater core
You will need a piece of pipe about 2" to 3"long that will fit
inside the diameter of the two heater hoses at the firewall and two hose
Posted on Feb 02, 2010
Tips for a great answer:
Dec 10, 2015 | 1997 Buick Skylark
Nov 14, 2014 | 1997 Buick Skylark
Oct 15, 2014 | 1997 Buick Skylark
Nov 02, 2013 | 1996 Dodge Stratus
Jan 15, 2013 | 1997 Buick Regal
Aug 17, 2012 | 1995 Buick Skylark
May 20, 2010 | 1997 Buick Skylark
Apr 19, 2010 | 1997 Buick Skylark
Dec 01, 2009 | 1997 Buick Skylark
69 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: