Question about 1994 Mazda Protege

1 Answer

Heat does not work

The heat does not work in my 94 mazda protege. What could be the problem??

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

We had the same problem, I have a 94 too and there was no heat. We found out it was the heater core. We had to change it since it was broken and leaking coolant everywhere. After we changed it, we have heat and runs great. Now, if u are mechanically inclined or have someone to help u, u can get the schematics of the part and do it yourself. That is what we did since my husband is a mechanic, but this is not a one man job. The only problem is, if u have no help and have to take it somewhere, it will cost u a fortune. In PA the cost of fixing it is approximately $967 and some change.
Hope this helps.

Posted on Mar 09, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What are the torque specs of the head bolts of a Mazda protege 94

step 1 17-19 ft/lb
step 2 90 degrees
step 3 additional 90 degrees
engine uses Torque To Yield head bolts
New head bolts must be used when cylinder head is replaced or re-installed

stockam auto

Jul 05, 2011 | 1994 Mazda Protege

1 Answer

Yes hi i have a 04 mazda protege and my wipers and

Sounds like you blew a fuse in the main fuse box.
Or a solenoid that helps to activate them.
check your fuse panel and find where those items are located in the box and replace

Feb 10, 2010 | 1995 Mazda 626

1 Answer

94 mazda protege removal front driveaxles both sides

If we're talking about the CV shafts, they have to first be popped out of the Hub, then they are pulled from the transmission.

Jul 21, 2009 | 1994 Mazda Protege

1 Answer

94 protege axels will not come out!!

you are going to have to jiggle and pry they also make a axel tool to hammer in but the ring on tip gets caught and it is a pain.try twisting and pry from more than one direction if you can like lift from bottom pry from top or side. good luck you will get them.

Jun 23, 2009 | 1995 Mazda Protege

1 Answer


this is a blend door problem it is either vacuum or servo motor driven and this door switches from cold side to hot side this seams like this is you problem. Hope this helps you.

Jan 18, 2009 | 1995 Mazda Protege

1 Answer

I have a 94 Mazda Protege and I don't get very good heat, the gauge says that the temp. is OK , Ther water pump seems to be working and I just replaced the thermostat. still the heat gets just barely warm,...

check your controls under dash maybe lever or cable has come off or broke to the heat door or recirculate vent/////// if you check the hose going to heater core and the return hose maybe clogged heater core

Nov 23, 2008 | Mazda Protege Cars & Trucks

2 Answers

Just a question

HERE ya go! Good luck.

Nov 20, 2008 | 1994 Mazda Protege

Not finding what you are looking for?
1994 Mazda Protege Logo

Related Topics:

209 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts


Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides