Question about 1989 Toyota Corolla 1.6

Open Question

How to replace inner tie rod toyota corolla 1995

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1861 Answers

SOURCE: inner tie rod ends on a 2002 toyota celica

First, you do NOT have to remove the rack to replace the inner tie rod ends. Second, If you want a .pdf regarding the procedure, I'll be glad to send it to you. But, the tie rods just screw off. Whatyou WILL need to do is get a good front-end alignement after you replace the inner tie rod. If not, you will destroy your tires. Alignment is critical to minimize tire wear on Celicas.

Posted on Nov 13, 2008

  • 161 Answers

SOURCE: 1989 toyota supra,driver side outer tie rod,does

Spray some WD40 on it and let it sit for half an hour it is probably seezed

Posted on Aug 29, 2009

GARYca
  • 672 Answers

SOURCE: 97 a toyota camry do they have replacable inner tie rod ends

they do have replaceable inner and outer tie rod ends, although I do recommend replacing the entire rack and pinion!! Hopefully this helps!!

Posted on Mar 28, 2010

  • 8404 Answers

SOURCE: I am replacing the inner

You will need sockets of the proper size, side cutter pliers, 16 oz or bigger ball peen hammer and a pickle fork (thing to remove the ball joint) probably regular pliers and a screw driver. You will possibly need new cotter pins and a grease gun. Other tools may be required but I would not lay down on the mechanic crawler until I had at least these items.

How do you intend to realign the front end? If you are going to do this, you will need a $25,000 wheel alignment machine. I recommend you get the alignment done at a shop equipped for this service.

Thanks for your question @ FixYa.com

Posted on Mar 04, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Toyota camary 1995 end tie rod digram


you need to either be able to get a wrench on the Inner Nut or you need the special tool to get the Inner Off. The Correct tool makes it an EASY Job..
65f5515d-4238-4aaf-9e87-134a665da60c.jpg

Apr 16, 2013 | 1995 Toyota Camry

1 Answer

Have anyone out there ever change inner tie rods on a1995 honda odyssey?,if so simply explain,THANKS


Procedure on replacing the inner tie rod ends:


1) Raise and safely support the vehicle.

2) Remove the front wheel/tire assembly.

3) Clean the steering rod between the steering boot and outer tie rod end lock nut with a suitable penetrating lubricant and a clean cloth or shop towel.

4) Loosen the outer tie rod end locking nut 1/8 turn.

5) Loosen the steering boot clamp(s), and slide the small clamp off the boot.

6) Carefully loosen the boot and slide outward off the steering rack and onto the shaft to expose the inner steering rod mounting fastener.

7) If necessary, position the inner steering rack shaft in or out to allow for additional access.

8) Relieve the steering rod nut locking tab from the inner steering rack shaft, then loosen the steering rod ball socket nut 1 turn.

9) Matchmark the tie rod end to the threaded shaft.

10) Remove the cotter key and castle nut from the outer tie rod end threaded spindle, and using a tie rod end removal tool, remove the tie rod from the steering knuckle.

11) Hold the tie rod with a wrench, and remove the outer tie rod end from the threaded rod, counting the number of complete turns it takes to remove the tie rod end from the shaft. Write the number of turns on a piece of note paper.

12) Remove the tie rod end lock nut from the threaded steering shaft.

13) Slide the steering rack boot off the shaft.

14) Remove the inner steering rod ball socket nut from the inner steering rack shaft.

To install:

1) Inspect the tie rod end for looseness, and the steering rack boot and tie rod end boot for cracks deterioration or damage and replace as necessary.

2) Clean steering rack shaft and apply a light coating of Genuine Honda Power steering fluid as necessary.

3) Apply a medium strength locking agent to the threads where the inner steering rod ball socket mounts. Use a new locking washer and a new stop washer, and install the inner tie rod onto the steering rack shaft.

4) Tighten the inner tie rod end fastener by 58 ft. lbs. (78 Nm)

5) Peen the lock washer over the nut or onto the flat surface of the steering rack shaft.

6) Apply silicone grease to the outer circumference of the inner tie rod end ball socket, and onto the groove just outside of the socket.

7) Apply silicone grease to the inside of the small end of the steering rack boot, and slide the boot over the steering shaft and onto the rack and install the boot clamps. If the boot has air hose fittings make sure they are installed as removed.

8) Apply a light film of an anti-seize compound onto the threaded tie rod end, and install the tie rod end lock nut.

9) Install the tie rod end onto the tie rod, turning it in exactly the number of turns it took to remove it.

10) Install the tie rod end following the tie rod end installation procedure.

11) The balance of installation is the reverse of the removal procedure.

12) Check the front end alignment and adjust as necessary.

Sep 10, 2012 | 1995 Honda Odyssey

1 Answer

92 toyota corrola inner tie rod replacement


Best to have an Alignment Shop do that, because it
will need to be aligned when your done

Don't go to one of the franchise names,go to a front end
& alignment only place

You could buy the tools, but you would never use them again

Any online tool supply will discribe what you would need

You may be better to replace the steering rack if it is original
to the car,it's going to fail anyway

Jul 05, 2012 | 1999 Toyota Corolla

1 Answer

My 1995 Toyota Corolla power steering fluid is not leaking on the floor but i have to add every 2 weeks. What could be the reason


The seals in the rack can leak and the boots on the inner tie rod can hold quite a bit of fluid. If your not seeing any leak then this is what I would suspect. the boots are not air tight, so if you squeeze one flat and it has fluid in it the fluid will come out of the end.

Aug 31, 2011 | 1995 Toyota Corolla

1 Answer

Machanic said may have loose tie rods on my 99 toyota corolla how can i tell and how do i fix, also how do i chang a o2 censer, does it uscrew and u just plug in new one and screw back in or do i need...


to check the tie rods you jack up the front of the car. Place your hands at the 9 and 3 o'clock positions on the tire. Push/pull on the tire. If you feel movement than look carefully at the out tie rod while you push or pull and see if it moves. If it does it is bad if it doesn't than the inner toe rod is bad. PYou will not be able to do the inner tie rod without some specialty tools.

The outer tie rods can be replaced by removing the tire, loosen the jam nut that holds the inner tie rod tight to the outer tie rod, removing the cotter pin (if it has one) from the tie rod end, remove the nut that secures the tie rod end to the knuckle, Hit the knuckle with a hammer where the tie rod goes through the knuckle until the tie rod comes loose from the knuckle (do not strike the tie rod end), remove the tie rod end from the knuckle and unscrew from inner tie rod counting the number of turns it takes to remove, install the new one using the same amount of turns.

After putting it back together you'll need to grease the new tie rod ends if equipped with grease zerks and have the car aligned.

The O2 sensor unthreads from the exhaust manifold as you thought. It will require an O2 socket which is a 7/8" socket with an opening down the side for the wiring harness to go through. you should be able to purchase the socket from the parts store that you purchase the O2 sensor at. DO NOT GET A UNIVERSAL FIT OR CHEAP AFTERMARKET BRAND, this will cause more problems and more money than just getting a good quality sensor from a reputable supplier or straight from the dealer.

Nov 21, 2010 | 1999 Toyota Corolla

1 Answer

97 a toyota camry do they have replacable inner tie rod ends


they do have replaceable inner and outer tie rod ends, although I do recommend replacing the entire rack and pinion!! Hopefully this helps!!

Mar 28, 2010 | 1997 Toyota Camry

1 Answer

How to Repair Steering Rack Bushing


there are two bolts that connect your inner tie rod to the rack loosen both bolts but only take one out move tie rod down and pop out bushing then replace the new one.Replace bolt and do the same for the other side and then tighten bolts it could be a tight place but very easy job to do

Jan 26, 2010 | 1995 Toyota Camry

2 Answers

98 altima loose wheel bearing


if you jacked up the car and you grab the tire from side to side u could tell if loose or bad but if you feel looseness in the steering wheel could be a tie rod bad move tie rod side to side and in and out to see if a problem

May 05, 2009 | 1990 Toyota Corolla

1 Answer

Inner tie rod ends on a 2002 toyota celica


First, you do NOT have to remove the rack to replace the inner tie rod ends. Second, If you want a .pdf regarding the procedure, I'll be glad to send it to you. But, the tie rods just screw off. Whatyou WILL need to do is get a good front-end alignement after you replace the inner tie rod. If not, you will destroy your tires. Alignment is critical to minimize tire wear on Celicas.

Nov 12, 2008 | 2002 Toyota Celica

Not finding what you are looking for?
1989 Toyota Corolla 1.6 Logo

Related Topics:

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...