Question about 2007 Honda CR-V
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
you have to go under the bumper and and look behind then look for the back of the lightbalb connection. if you see that. pull on it carefully. if rusted, spray some wd forty on it but make sure you dont get the wires with the wd forty
Posted on Aug 05, 2009
You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door
Posted on Aug 14, 2009
you have a bad door switch usually located in the door jam if you are sitting in the seat and your door is open look for something that looks like a small button about the size of a pencil eraser it is possible the plunger is broken off so all you may see is a metal object with a hole, replace this if plunger is broken
Posted on Aug 29, 2009
Honda say thats not true and to wait until the car tells you when to change it. I have a 2008 CRV and you should and can wait till the oil say 15%! We took ours in after a long road trip for our first oil change. We had over 5K and the oil said 65%. The guy said that we did not need to bring it in. We still had change it while it was their but the car goes around 8-9 K on a oil change. A little wrench will come on and the oil life % will come on when it reach15% and will come on every time you start the car till you get it changed.
Posted on Sep 10, 2009
you must carefully pop off the door plastic clips using a screwdriver and prying gently until they pop out , also remove the screws under any small round plastic screw cover inserts and in the plastic door handle area
Posted on Sep 19, 2009
Tips for a great answer:
Jun 18, 2016 | Honda HRV Cars & Trucks
Feb 07, 2014 | 2003 Pontiac Grand Am
Aug 08, 2012 | 2012 Honda CR-V
May 31, 2010 | 2001 Honda CR-V
Aug 21, 2009 | 2003 Honda CR-V
Jun 19, 2009 | 1999 Honda CR-V
717 people viewed this question
Usually answered in minutes!