Question about 1998 Dodge Grand Caravan

Open Question

How do I remove automatic shift cable from shifter on 98 grand caravan?

I am trying to remove steering column to replace a leaking heater core. Don't see how to remove shift cable from shifter?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
LEFTY64
  • 69 Answers

SOURCE: Need to replace the heater core in a 1995 Dodge Grand Caravan SE

1991-95 Models

  1. Disable the air bag system by disconnecting the negative battery cable.
  2. Have the system discharged by a qualified professional mechanic using an approved recovery/recycling machine.
  3. Drain the cooling system.
  4. Remove the steering column cover and left and right side under panel silencers.
  5. Remove the center bezel by unclipping it from the instrument panel.
  6. Remove the accessory switch carrier and the heater/air conditioning control head.
  7. Remove storage bin and lower right instrument panel.
  8. Disconnect the blower motor lead under the right side of the instrument panel.
  9. Remove the right side 40-way connector wiring bracket.
  10. Remove the lower right reinforcement, body computer bracket and mid-to-lower reinforcement as an assembly.
  11. Disconnect the vacuum lines at the brake booster and water valve.
  12. Clamp off the heater hoses near the heater core and remove the hoses from the core tubes. Plug the hose ends and the core tubes to prevent spillage of coolant.
  13. If equipped with air conditioning, remove the H-valve and condensation tube.
  14. Disconnect the temperature control cable and vacuum harness at the connection at the top of the unit.
  15. Remove the retaining nuts from the package mounting studs at the firewall. Disconnect the hanger strap from the package and rotate it aside.

To install:
  1. Remove the temperature control door from the unit and clean the unit out with solvent. Lubricate the lower pivot rod and its well and install. Wrap the heater core and/or evaporator with foam tape and place in position. Secure with the screws.
  2. Assemble the unit, making sure all vacuum tubes are properly routed.
  3. Install the assembly to the vehicle and connect the vacuum harness. Install the nuts to the firewall and install the condensation tube. Fold the carpeting back into position.
  4. Connect the hanger strap from the package and rotate it aside. Install the 2 brackets supporting the lower edge of the heater housing. Connect the blower motor wiring, resistor wiring and the temperature control cable.
  5. Install the retaining screws from the right side to the steering column. Install the instrument panel trim covering and reinforcement.
  6. Assemble the unit, making sure all vacuum tubes are properly routed.
  7. Install the assembly to the vehicle and connect the vacuum harness. Install the nuts to the firewall and install the condensation tube. Fold the carpeting back into position.
  8. Connect the hanger strap from the package and rotate it aside. Connect the blower motor wiring and temperature control cable.
  9. Install the lower right reinforcement, body computer bracket and mid-to-lower reinforcement as an assembly.
  10. Install the right side 40-way connector wiring bracket.
  11. Install the lower right instrument panel and storage bin.
  12. Install the heater/air conditioning control head and accessory switch carrier.
  13. Install the center bezel to the instrument panel.
  14. Install the under panel silencers and steering column cover.
  15. Install the vacuum lines at the brake booster and water valve.
  16. Connect the heater hoses to the core tubes.
  17. Using new gaskets, install the H-valve and connect the refrigerant lines. Install the condensation tube.
  18. Have the system evacuated and recharged by a qualified professional mechanic, utilizing the proper equipment. Add 2 fl. oz. (59 ml) of refrigerant oil during the recharge. Fill the cooling system.
  19. Perform the Air Bag System Check procedures outlined in this section before connecting the negative battery cable.
  20. Connect the negative battery cable and check the entire climate control system for proper operation and leaks.

Posted on Apr 08, 2009

Ad
Nomodo4u
  • 863 Answers

SOURCE: Dodge 2002 Grand Caravan V6 3.3 engine overheating/no cabin heat.

Replace the bad radiator hose first.  Second- get you special formulated anti-freeze dye from the auto store and pour it into the radiator.  Third- make sure you got all the air pockets out of your system, cause the coolant system won't work with air pockets in it.  Fourth- Check for leaks by looking for the colored dye.  If it's not the radiator hose, then could possibly be a pin hole in your radiator.  Would suggest replacing all the radiator hoses at the same time while you got the coolant system disconnected, cause you don't want to have to come back and replace another hose in a few months.

Posted on Nov 06, 2009

Testimonial: "Helpful & quick feedback! Thanks! "

techbuster
  • 5081 Answers

SOURCE: Heater blower motor replacement -1997 Dodge Grand Caravan

Remove the cover plate on the passenger side of the heater box, 3-4 screws.
Unplug the motor assembly, remove 3-4 more screws that hold the motor in place and pull it down from its position. Get an aftermarket motor and installed it in the original housing with the original squirrel cage.
Installation is the reverse of removal.

Posted on Nov 23, 2009

  • 149 Answers

SOURCE: how do i access the front heater core of a 2004

Remove neg batt cable. Drain the cooling system. Remove radiator cap, set heater control to max heat. Drain coolant through valve on bottom rad of the radiator. 12 qt bucket. Pull the carpet out of the way on the driver side floor. Remove the bolts to the steering shaft coupler cover. Remove brake light switch from bracket. Diconnect the power brake booster pushrod. Place towels underneath around area for fluid drippings. Remove retaining clips from HC fittings. Pull the tube out of the HC & carefully rotate them out of the way, plug the open tubes for less mess. Remove the HC bracket bolts, then remove the braket. Push the brake pedal down , the gas pedal up & move the shaft cover out of the way. Pull the HC out of the heat/ac hopusing unit...

Posted on Jan 19, 2010

  • 149 Answers

SOURCE: how to install a heater core on a 2005 dodge grand

Very easy if you go through the lower part near the peddles

Posted on Jan 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Diagram for replacing the heater core in my 2007 Dodge Grande Caravan SE? Strong smell of Radiator Fluid. No obvious leaks, smell stronger when using defrost. Passenger side carpet is not...


Sorry no pictures
Replacing the Front Heater Core in a 2006 Dodge Caravan.
1 Turn the steering wheel so that the wheels point straight forward.
2 Disconnect the negative (black) battery cable.
3 Drain the coolant by twisting open the valve at the bottom of the radiator. Use a clean container that holds at least 10.5 quarts. You will reuse the coolant later.
4 Remove the panel on the lower left side of the steering column and disconnect the parking brake cable with a pair of pliers.
5 Unscrew the 10 bolts that connect the steering column cover liner to the instrument panel and remove the cover.
6 Turn the key to the LOCK position and turn the steering wheel to the LOCKED position.
7 Unhook the gear shift cable and remove its mounting bracket.
8 Unscrew the two screws that connect the bezel to the instrument panel and remove the retaining clips. Remove the bezel.
9 Remove the two screws that connect the steering column shroud to the column and remove the shroud.
10 Remove the coupler from the steering column and intermediate steering shaft.
11 Loosen the nuts that connect the lower steering column mounting bracket, but do not remove them. Completely remove the two nuts and washers from the upper bracket.
12 Pull out the steering column.
13 Remove the interconnect and bracket that connects the instrument panel to the chassis wiring.
14 Remove the boot from the bottom of the steering shaft.
15 Use locking pliers to pinch off the heater hoses in the engine compartment. Remove the plate covering the heater core (the hoses run through it) and disconnect the hoses.
16 Unclip the connectors that hold in the heater core. Lift the accelerator pedal to enable you to slide the heater core out part way. Press the brake pedal to make room to completely remove the heater core.
17 Replace the heater core. Installation is the reverse of removal. The nuts on the steering column mounting bracket should be torqued to 105 ft. lbs. Torque the pinch bolt on the coupler to 21 ft. lbs.

Sep 14, 2011 | Dodge Grand Caravan Cars & Trucks

1 Answer

How to remove a heator core from a 2001 dodge caravan? do you have to take the dash out? or just the bottom pannel.


The 2001 Dodge caravan has 2 heater cores - front (the main one), and the rear. Removal of the
rear heater core is a whole different procedure than the front.

Front Heater Core - Removal and Installation
  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Align the wheels in the straight-ahead position.
  3. Disconnect the negative battery cable.
    CAUTION Before working around the steering wheel or the instrument panel all 2 minutes to pass to allow the air bag module to discharge.
  4. Drain the cooling system into a clean container for reuse.
  5. Remove the steering column, by removing or disconnect the following:

    Lower left side steering column cover Parking brake release cable from the parking brake lever 10 steering column cover liner-to-instrument panel bolts and the cover liner
  6. Rotate the key to the LOCK position; then, rotate the steering wheel to the LOCKED position.

    Gear selector cable and its mounting bracket as an assembly from the upper steering column mounting bracket 2 instrument cluster trim bezel-to-instrument panel screws, retaining clips and bezel 2 steering column shroud-to-steering column screws and the shroud Steering column-to-intermediate steering shaft coupler
  7. Loosen but do not remove the 2 lower steering column mounting bracket nuts/washers.

    2 upper steering column mounting bracket nuts/washers Steering column assembly from the vehicle
  8. Remove or disconnect the following:

    Instrument panel-to-chassis harness interconnect and bracket Lower silencer boot, at the base of the steering shaft
  9. Working in the engine compartment, pinch off the heater hoses.

    Heater core cover. Position some towels under the heater core hoses. Heater core plate and the hoses
  10. Depress the heater core retaining clips.
  11. Lift the accelerator pedal and slide the heater core past it.
  12. Depress the brake pedal and remove the heater core from the heater/air conditioning housing assembly.

    0996b43f8022fa83.jpg enlarge_icon.gifenlarge_tooltip.gif

    Fig. View of the steering column assembly


    0996b43f8022fa84.jpg enlarge_icon.gifenlarge_tooltip.gif

    Fig. View of the interconnect and bracket


    0996b43f8022fa85.jpg enlarge_icon.gifenlarge_tooltip.gif

    Fig. View of the front heater core assembly


To install:
  1. Depress the brake pedal and install the heater core into the heater/air conditioning housing assembly.
  2. Lift the accelerator pedal and slide the heater core past it.
  3. Install or connect the following:

    Heater hoses (using new O-rings) and the heater core plate Heater core cover Heater hoses clamps, working in the engine compartment Lower silencer boot at the base of the steering shaft Instrument panel-to-chassis harness interconnect and bracket
  4. Install the steering column assembly by installing or connect the following:

    Steering column assembly, carefully into the vehicle. 2 upper and 2 lower steering column mounting bracket nuts/washers. Torque the nuts to 105 inch lbs. (12 Nm). Steering column-to-intermediate steering shaft coupler and tighten the pinch bolt to 21 ft. lbs. (28 Nm) 2 steering column shroud and the shroud-to-steering column screws Bezel, the retaining clips and the 2 instrument cluster trim bezel-to-instrument panel screws Gear selector cable and its mounting bracket as an assembly to the upper steering column mounting bracket 10 steering column cover liner and the cover liner-to-instrument panel bolts Parking brake release cable to the parking brake lever Lower left side steering column cover. Lower left side steering column cover
  5. Refill the cooling system.
  6. Connect the negative battery cable.
  7. Run the engine to normal operating temperatures; then, check the climate control operation and check for leaks.

Jan 02, 2011 | 2001 Dodge Caravan

1 Answer

Removing heater core


This is for a 2.3L
Hope this helps, it it does please leave feedback Thank You and Good Luck

REMOVAL
  1. Disconnect battery ground cable.
  2. Drain cooling system.
  3. Raise and support vehicle.
  4. Disconnect heater hoses from heater core assembly.
  5. Remove drain tube.
  6. Lower vehicle.
  7. If equipped, remove console as follows:
    1. Apply parking brake and block drive wheels.
    2. Position transaxle shift lever in Neutral.
    3. On models with automatic transaxle, remove clip retaining shift lever handle to lever, then remove shift lever handle.
    4. On models with manual transaxle, turn shift lever handle counterclockwise to remove from lever.
    5. On all models, carefully pry upward on outer edges of console trim plate.
    6. Disconnect electrical connectors and ashtray lamp from console trim plate, then remove trim plate from console.
    7. Remove console to mounting bracket attaching screws, then remove console.
  1. Right and left sound insulators.
  2. Steering column opening filler.
Floor Air Duct Outlet 58917672

  1. Floor air outlet duct.
  2. Heater core cover.
  3. Heater core mounting clamps and remove heater core.
INSTALLATION
  1. Heater core and heater core mounting clamps.
  2. Heater core cover.
  3. Floor air outlet duct.
  4. Right and left sound insulators.
  5. Console.
  6. Steering column opening filler.
  7. Raise vehicle.
  8. Heater hoses to heater core.
  9. Drain tube to heater case.
  10. Lower vehicle.
  11. Negative battery cable.
  12. Fill cooling system and check for leaks.

Jan 01, 2011 | 1994 Pontiac Grand Am

1 Answer

Hi I,ve got a 2000 Jeep Grand Cherokee, the problem I,m having is when I turn on the heating fan i get a mist or steam coming out of the vents smells like coolant could this be a heater core problem ,...


Yes, your core is leaking. The core is in the box under the dash. The procedure is quite involved. I will attempt to paste from autozone.com below:
  1. Before servicing the vehicle, please familiarize yourself with safety procedures.
  2. Disconnect and remove the negative battery.
    CAUTION After disconnecting the negative battery cable, wait 2 minutes for the driver-s/passenger-s air bag system capacitor to discharge before attempting to do any work around the steering column or instrument.
  3. Drain the cooling system into a clean container for reuse.
  4. Remove the instrument panel by performing the following procedure:
    1. Turn the steering wheel in the straight-ahead position.
    2. Remove the A-pillar trim from both sides of the vehicle.
    3. Remove the top cover from the instrument panel.
    4. Near the windshield line, remove the 4 instrument panel-to-chassis nuts.
    5. Remove the scuff plates from both front door sills.
    6. Remove the trim panels from both sides of the inner cowl.
    7. Remove the floor console.
    8. Remove the fuse cover from the junction box.
    9. Remove the instrument panel cluster bezel.
    10. Remove the steering column opening cover from the instrument panel.
    11. Remove the steering column bracket from the instrument panel column support bracket.
    12. Remove the lower steering column shroud cover-to-multifunction switch screw; then, unsnap both halves of the shroud cover from the steering column.
    13. Disconnect the instrument panel wiring harness connectors from the following steering column components:
      Both lower clock spring connector receptacles Left multifunction switch receptacle Right multifunction switch receptacle Both ignition switch receptacles Shifter interlock solenoid receptacle Sentry Key Immobilizer Module (SKIM) receptacle, if equipped
    14. Turn the ignition switch to ON position; then, release and remove the shifter interlock cable connector from the ignition lock housing receptacle.
    15. Turn the ignition switch to OFF position; this will prevent the steering wheel from turning and the loss of the clock spring centering following steering column removal.
    16. Remove the 4 steering column-to-instrument panel steering column bracket nuts.
    17. Remove the steering column from the instrument panel.
    18. Disconnect both side body wiring harness bulkhead connectors, the Ignition Off Draw (IOD) wiring harness connector and the fused wiring harness connector from the junction block connector receptacles.
    19. Disconnect the instrument panel wiring harness-to-floor console component connectors:
      Air bag control module connector receptacle Parking brake switch terminal Transmission shifter connector receptacle
    20. Remove the 2 instrument panel wiring harness-to-floor console ground terminals located behind the air bag control module.
    21. Disconnect the instrument panel wiring harness-to-floor console retainers.
    22. Remove the instrument panel-to-floor console bracket screws and the bracket.
    23. Remove the driver-s side floor duct-to-heater/air conditioning housing assembly screw and remove the duct.
    24. If equipped with a manual heating-air conditioning system, disconnect the vacuum harness connector from behind the driver-s side floor duct.
    25. Remove the instrument panel steering column support bracket-to-driver-s side of the heater/air conditioning housing assembly screw
    26. Remove the instrument panel steering column support bracket-to-intermediate bracket screw.
    27. Remove the instrument panel steering column support bracket-to-driver-s side cowl plenum panel nut.
    28. Remove the 2 instrument panel-to-driver-s side cowl side inner panel screws.
    29. Remove the instrument panel end cap.
    30. Remove the lower right center bezel from the instrument panel.
    31. At the passenger-s side cowl side inner panel, disconnect the instrument panel wiring harness bulkhead connector from the lower cavity of the inline connector.
    32. Near the right side cowl inner panel, located under the end of the instrument panel, disconnect both halves of the radio antenna coaxial cable connector.
    33. Disconnect the 2 instrument panel-to-heater/air conditioning assembly wiring harness connectors.
    34. At the passenger-s side, remove the 2 instrument panel structural duct-to-heater/air conditioning housing assembly screws.
    35. At the passenger-s side cowl side inner panel, remove the 2 instrument panel-to-passenger-s side cowl side inner panel screws.
    36. With the help of an assistant, lift the instrument panel from the vehicle.
  5. Discharge and recover the air conditioning system refrigerant.
  6. Disconnect the air conditioning system lines at the evaporator. Plug the openings to prevent contamination.
  7. Disconnect the heater hoses from the heater core. Plug the openings to prevent coolant loss.
  8. If equipped with a manual temperature control system, unplug the heater/air conditioning system vacuum supply line connector from the T-fitting located near the heater core tubes.
  9. From the passenger-s side inner fender shield, remove the coolant reservoir/overflow bottle.
  10. From the passenger-s side in the engine compartment dash panel, remove the PCM; DO NOT unplug it, just move it aside.
  11. In the engine compartment, remove the heater/air conditioning housing-to-chassis nuts.
  12. At the center of the dashboard, remove the rear floor ducts from the floor heat duct outlets.
  13. Disconnect the heater/air conditioning housing wire harness connectors.
  14. In the passenger compartment, remove the heater/air conditioning housing-to-chassis nuts.
  15. Place covers inside the vehicle to catch any spilt coolant.
  16. Remove the heater/air conditioning housing assembly from the vehicle.
  17. Remove the foam gasket from around the heater core tubes.
    NOTE Note the position of the irregular shaped gasket so that it may be reinstalled in its correct position.
  18. Remove the heater core retainers and screws.
  19. If necessary, remove the mode door actuator for clearance to remove the core.
  20. Remove the heater core from the heater/air conditioning housing assembly.

    0996b43f8022fa8a.jpg enlarge_icon.gifenlarge_tooltip.gif

    Fig. View of the instrument panel assembly-Grand Cherokee

Sep 16, 2010 | 2000 Jeep Grand Cherokee

1 Answer

How to replace heater hose. they are the hoses a e back of the engine by the fire wall


Taurus And Sable - Removal And Installation
  1. Disconnect the negative battery cable.
    CAUTION After disconnecting the negative battery cable, wait for at least 1 minute for the SRS or air bag module to deplete its energy.

  2. Place the front wheels in the straight-ahead position.
  3. Lock the steering column.
  4. Remove or disconnect the following:
    SRS bolt covers from both sides of the steering wheel SRS module-to-steering wheel bolts SRS module and disconnect the electrical connector Steering wheel bolt and discard it
  5. Press the steering wheel from the steering column.
    Lower steering column shaft bolt 2 lower instrument panel cover-to-instrument panel screws and unsnap the lower cover from the instrument panel
  6. Turn ignition switch to the RUN position
  7. Insert a 1 / 8 in. (3mm) wire or pin punch in the lower steering column shroud hole, under the ignition switch; then, press on the pin while pulling out on the ignition switch lock cylinder and remove it from the steering column lock cylinder housing.
  8. Remove or disconnect the following:
    3 steering column shroud screws and the shrouds Shift control selector lever boot Gearshift lever pin from the manual control lever and remove the lever Wiring connector at the bottom of the steering column and remove the wiring from the column, (if equipped with an overdrive lockout switch on the manual control lever) Electrical connectors Multi-function switch screws and move it aside Shift indicator cable from the shifter tube Shifter indicator-to-column adjustment cable screw Interlock cable and actuator (if equipped with a column shift) 4 steering column-to-instrument panel bracket nuts and steering column Push pins and the lower instrument cover from the instrument panel reinforcement (at the passenger-s side) Console finish panel
  9. Under the steering column, 2 instrument panel brace screws, the courtesy lamp socket, the 2 Diagnostic Link Connector (DLC) screws and the instrument panel brace.
  10. If not equipped with an Electronic Automatic Temperature Control (EATC), disconnect the electrical connectors and the vacuum harness from the evaporator housing and the blower motor.
  11. If equipped with an Electronic Automatic Temperature Control (EATC), remove the sensor hose/elbow and disconnect the electrical harness connectors and the vacuum hose harness from the evaporator housing.
  12. Insert the Radio Removing tools 415-001into the integrated control panel faceplate; then, push the tools in approximately 1 1 / 2 in. (38mm) to release the retaining clips. Spread the tools slightly and pull the integrated control panel from the instrument panel.
  13. Remove or disconnect the following:
    Electrical connectors and the automatic temperature control sensor hose and elbow, if equipped 6 console center finish panel screws and the panel, (if equipped with a floor shift) 4 instrument panel finish panel screws and panel, located at the right side of the steering column, (if equipped with a column shift) Instrument cluster finish panel-to-instrument panel clips and pull the finish panel straight out 4 instrument cluster-to-instrument panel screws, the electrical connectors and the instrument cluster Upper finish panel (located at the top of the instrument panel) Light sensor amplifier connector, (if equipped with an autolamp) Instrument panel finish end panels on both sides of the instrument panel Front scuff plates and pull the door weatherstrip away from the instrument panel (on both sides of the instrument panel) 3 instrument panel-to-upper cowl top panel screws 2 screws at each end of the instrument panel Instrument panel electrical connectors and the parking brake switch Instrument panel
  14. Drain the cooling system into a clean container for reuse
  15. Remove or disconnect the following:
    WARNING Do not attempt to bend any part of the lever, for it is brittle and will break. Heater hoses from the heater core and plug the openings 4 air conditioning electronic blend door actuator-to-heater/air conditioning housing assembly screws and the actuator Metal cover, disengage the spring from the heater core cover and from the lever Gently, depress the locking ramp and remove the lever from the secondary air temperature control door end
  16. Rotate the primary air conditioning air temperature control door shaft downward, swing the metal link counterclockwise and remove it from the pin.
  17. Remove the 3 heater core cover-to-heater/air conditioning housing assembly screws, the cover and the seal.
  18. Press on the heater core tubes and remove the heater core from the heater/air conditioning housing assembly.

Hope helps (remember rated this).

May 28, 2010 | 2002 Ford Taurus

1 Answer

Replace heater core in 1994 pontiac grand am


Removal & Installation


  1. Disconnect the negative battery cable.
  2. Drain and recycle the engine coolant.
  3. Raise and safely support the front of the vehicle.
  4. If necessary, remove the rear lateral transaxle strut mount.
  5. Detach the drain tube, then disconnect the heater hoses from the core tubes.
  6. Carefully lower the vehicle.
  7. Remove the console if equipped.
  8. Unfasten and remove the sound insulators, console extensions and/or steering column filler, as required.
2a4e97b.gif
Unfasten the sound insulator retaining bolts ...

7ed3765.gif
... then remove the sound insulator

  1. On some models it may be necessary to remove the steering column opening filler.
  2. Remove the floor or console outlet ductwork and hoses.
  3. Remove the heater core access cover.
a5f8d39.gif

Remove the heater core access cover

Unfasten the heater core mounting clamps/bolts, then extract the heater core from the vehicle.

a5c4734.gif
Unfasten the heater core retaining bolts; most later models are secured with clamps.

b2756d9.gif
Remove the heater core from the vehicle

To install:
  1. Install the heater core, then secure using the clamps/bolts.
  2. Fasten the heater core cover.
  3. Connect the outlet hoses and ducts.
  4. Install the sound insulators, console extensions and/or steering column filler.
  5. Raise and safely support the vehicle.
  6. Install the drain tube and connect the heater hoses to the core tubes.
  7. If removed, install the rear lateral transaxle strut mount, if removed.
  8. Carefully lower the vehicle.
  9. Connect the negative battery cable.
  10. Fill cooling system and check for leaks. Start the engine and allow to come to normal operating temperature. Recheck for leaks and check coolant level. Add if necessary.

Nov 13, 2009 | 1994 Pontiac Grand Am

2 Answers

How do i replace heater core


Removal & Installation

  1. Disconnect the negative battery cable.
  2. Drain and recycle the engine coolant.
  3. Raise and safely support the front of the vehicle.
  4. If necessary, remove the rear lateral transaxle strut mount.
  5. Detach the drain tube, then disconnect the heater hoses from the core tubes.
  6. Carefully lower the vehicle.
  7. Remove the console if equipped.
  8. Unfasten and remove the sound insulators, console extensions and/or steering column filler, as required.
  9. On some models it may be necessary to remove the steering column opening filler.
  10. Remove the floor or console outlet ductwork and hoses.
  11. Remove the heater core access cover.
  12. Unfasten the heater core mounting clamps/bolts, then extract the heater core from the vehicle.
To install:
  1. Install the heater core, then secure using the clamps/bolts.
  2. Fasten the heater core cover.
  3. Connect the outlet hoses and ducts.
  4. Install the sound insulators, console extensions and/or steering column filler.
  5. Raise and safely support the vehicle.
  6. Install the drain tube and connect the heater hoses to the core tubes.
  7. If removed, install the rear lateral transaxle strut mount, if removed.
  8. Carefully lower the vehicle.
  9. Connect the negative battery cable.
  10. Fill cooling system and check for leaks. Start the engine and allow to come to normal operating temperature. Recheck for leaks and check coolant level. Add if necessary.

Nov 07, 2009 | 1996 Pontiac Grand Am

1 Answer

I need instructions on how to replace a heater core in 1994 Grand am


Removal & Installation
  1. Disconnect the negative battery cable.
  2. Drain and recycle the engine coolant.
  3. Raise and safely support the front of the vehicle.
  4. If necessary, remove the rear lateral transaxle strut mount.
  5. Detach the drain tube, then disconnect the heater hoses from the core tubes.
  6. Carefully lower the vehicle.
  7. Remove the console if equipped.
  8. Unfasten and remove the sound insulators, console extensions and/or steering column filler, as required.
  9. On some models it may be necessary to remove the steering column opening filler.
  10. Remove the floor or console outlet ductwork and hoses.
  11. Remove the heater core access cover.
  12. Unfasten the heater core mounting clamps/bolts, then extract the heater core from the vehicle
To install:
  1. Install the heater core, then secure using the clamps/bolts.
  2. Fasten the heater core cover.
  3. Connect the outlet hoses and ducts.
  4. Install the sound insulators, console extensions and/or steering column filler.
  5. Raise and safely support the vehicle.
  6. Install the drain tube and connect the heater hoses to the core tubes.
  7. If removed, install the rear lateral transaxle strut mount, if removed.
  8. Carefully lower the vehicle.
  9. Connect the negative battery cable.
  10. Fill cooling system and check for leaks. Start the engine and allow to come to normal operating temperature. Recheck for leaks and check coolant level. Add if necessary.
If your good with tools, this should take about 3 hours to do from start to finish. Good luck and keep me posted.

Nov 04, 2009 | 1994 Pontiac Grand Am

2 Answers

How do i change heater core in 1999 dodge caravan?


Big job.
Remove the dash. The heater-core is behind the center console.

Oct 25, 2009 | 1999 Dodge Grand Caravan

3 Answers

Heater core


18901fc.gifHere is an exploded view of the heating/air conditioning blower box. This contraption is located on the passengerside under the dash. I've changed heater cores on other cars but never worked on a caravan so not sure how difficult it'll be. You may need to remove a few cover panels to access this and the heater core #22 is located behind the distribution box #6 containing parts 7-18 and hopefully comes off as a unit. I wouldn't want to put it back together just looking at the pic. You may just need to remove the heater tube cover #4 to access the connections and slide out the core.....NAH couldn't be that simple!!! Hope this was of some help. Good luck.













Oct 18, 2008 | 2000 Dodge Caravan

Not finding what you are looking for?
1998 Dodge Grand Caravan Logo

Related Topics:

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...