Question about Cars & Trucks
Were and how to change glow plugs on 1.6 hdi
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Injectors from the same ccm engine are most probably sounds same but to be on the safe side check not only the shape but code on the top of injector too. Because they are piezo effect injectors and set by the manufacture for a specific pressure for specific engine codes.
Posted on Sep 04, 2009
what voltage u getting ?. did it just stop and then not restart. if its getting fuel and glow plugs are working the next two items id look at is the cam shaft and crank shaft position sencors. also make sure ur battery is in good condition, so starter motor is turning fast enough to build up the correct pressure on the rail.
Posted on Dec 14, 2009
Easy enough to do its inside a canister at the front of the engine on this year if its a later one,when you take the top off make sure that you use a magnet and get all the swarf out even use a brake and clutch spray and cotton bud if you have to as the slightest missed bit could end up in the pump and damage it ,it will self bleed itself as their is a electric lift pump in the fuel tank .The swarf comes from the pump and get returned to the tank by the leak off and then comes up into the filter its a common thing with these cars so do as a i say and you will have no problems .Makes a change to answer questions on cars i know about instead of american cars and i answer wrong as i assume its a diesel as the models stated i have only ever seen as diesels here in europe but they dont have them in america --strange i would have thought but wait till have to pay our prices for fuel then see what happens
Posted on Feb 09, 2012
SOURCE: PEUGEOT 206 HDI STARTING PROBLEM
i had a similar problem and it turned out to be the relay for the heater plugs had gone put a tester on one of the heater plug wires and see if there is any power going to them
Posted on Oct 27, 2012
Tips for a great answer:
Aug 11, 2014 | Cars & Trucks
Feb 26, 2010 | 1989 Peugeot 405
Dec 12, 2009 | 2005 Peugeot 405
Oct 09, 2009 | 2006 Peugeot 604
May 04, 2009 | 1987 Peugeot Liberte
Apr 04, 2009 | 2005 Peugeot 405
Mar 14, 2009 | 2005 Peugeot 405
Dec 07, 2008 | 2006 Peugeot 604
Nov 02, 2008 | Peugeot 604 Cars & Trucks
128 people viewed this question
Usually answered in minutes!