Question about 2008 Pontiac G6 Sedan
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: rear brake pads
try going to the site below here as well as reading this, it's really helpful and informative, it's a nice step by step. braking systems, when it comes to changing the brake pads hasn't really changed much with modern technology, just remember to used the proper tools to compress all the pistons equally, and also if your pistons have that cross going over the top of them then you have to use a pair of needle nosed pliers to turn the piston counterclockwise this will compress the piston.....hope this and the site are helpful....good luck and happy wrench turning!
Posted on Jan 28, 2009
the rear pistons on this car screw into the caliper,you need a special tool, which most parts store carry,if you need more help get back to me and we'll go from there. please rate my fix as i strive to be the best,problems get back to me Thanks Ray
Posted on May 19, 2009
its probally a haligen bulb needs replaced from the inside under the hood that twists in the back of the light just half a turn the unplug old and put in new
Posted on May 31, 2009
Ok! here is the solution ...
After changing the pad dont try to push back the piston the old fashioned way or you will broke the caliper casting.
This new kind of break should be only twisted clockwise to bring the piston back to its position you can use only long nose pliers to rotate the piston since there is two cavity on the piston for this use.
Also after setting the piston back to it's position take care of the seal around the piston be shure before replacing the caliper over the disk that the seal will not go between the disk and the pad...
slide the pads gently to it's position and that's it.
Posted on May 10, 2010
Tips for a great answer:
Jun 09, 2017 | Pontiac Cars & Trucks
Jul 27, 2016 | 2008 Pontiac G6
Mar 29, 2015 | 2008 Pontiac G6 GT
Jan 07, 2015 | Cars & Trucks
Jul 29, 2011 | 2008 Pontiac G6 Sedan
Jul 24, 2010 | 2008 Pontiac G6 Sedan
Jun 02, 2010 | 2005 Pontiac G6
Apr 25, 2009 | 2008 Pontiac G6 Sedan
Jan 28, 2009 | 2008 Pontiac G6 Sedan
42 people viewed this question
Usually answered in minutes!