Question about Honda Cars & Trucks
Honda civic two doors 2007
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
both are located in the exhaust system. You have to get the car off the ground and follw pipes. You cant miss the O2 sensors.
Posted on Jan 15, 2009
SOURCE: Bumper cover removal
It is a little more complicated than that. There are two nuts below the headlight assemblies in the engine compartment. You will need to remove the battery and overflow bottle to get at the one on the passenger side. Remove the turn signals in the bumper, then there are 2 or 3 bolts holding a mounting bracket behind the each of the turn signals. There are a number of bolts with washer heads and reatiners on the underside of the bumper as the previous responder indicated.
Posted on Jan 26, 2009
pop hood .... remove clips directly on top of the bumper.... remove screws in fender.... and bolts under the bumper.... thats what i did on my civic yours should be similar.....
Posted on Jun 18, 2009
you must carefully pop off the door plastic clips using a screwdriver and prying gently until they pop out , also remove the screws under any small round plastic screw cover inserts and in the plastic door handle area
Posted on Sep 19, 2009
Step one Look at the inside door handle. Behind it you should see a little cover, You pop that off and there will be 2 phillips head screws behind it. remove them.
Pop out the door handle, and unplug the power lock plug,
Youll also have to take the door lock rod, by spinning the plastic door handle 90 degrees until u can wiggle it out.
next remove the sail panel( The little triangle shaped piece in the corner of the door on the top, ( may have a tweeter in it) ( it just pops out)
Next take a screwdriver (flat head) and pry off the cover of the door handle, there will be
2 phillips head screw behind it ( remove screws)
Unplug power window connector (big green plug)
Now just start gently pry the door panel off with a screw driver, see if u can peek behind the panel and see where the panel clips are, and pry near those areas
Posted on Apr 03, 2010
Tips for a great answer:
Nov 17, 2017 | Cars & Trucks
Mar 14, 2013 | 2003 Honda Civic
Oct 26, 2012 | 1998 Honda Civic
Feb 25, 2011 | 2002 Honda Civic
Nov 11, 2010 | 1993 Honda Civic 4 Door
Oct 12, 2009 | 1997 Honda Civic
Jun 10, 2009 | 1991 Honda Civic
Feb 07, 2009 | 1996 Honda Civic
Jun 17, 2008 | 1998 Honda Civic
73 people viewed this question
Usually answered in minutes!