Question about 1994 Pontiac Grand Am

1 Answer

Replace oil pump in 94 grand am

Replace oil pump

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Pontiac Master
  • 14,036 Answers

The 2.3 and 3.1 engines need to drop oil pan.for the 3.3 engine you have to remove timing chain cover.you have to remove oil filter adapter the pressure regulator valve and the valve spring.then remove oil pump cover to oil pump screws remove cover remove oil pump gears.when installing another new oil pump lubricate the oil pump gears with clean engine oil pack the pump cavity with petroleum jelly.torque oil pan cover screws to 97 inch lbs which would be 11 ft lbs torque.oil filter adapter plate 24 ft lbs.

Posted on Jan 27, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

94 Grande Marquee leaks oil most common issue


The noise might be coming from a belt, tensioner, alternator, idler pulley or a pump. Valve body gaskets, drain plugs, and other parts have gaskets. They might leak over time, and will need to be replaced. Sometimes bolts get loose, and then the gaskets leak.

Jan 27, 2015 | 1994 Mercury Grand Marquis

1 Answer

How long and easy is it to rebuild oil pump on 94 grand caravan 3.8l


Don't bother. Replace the unit.
3.0 liter
The oil pump assembly used on this engine is mounted at the front of the crankshaft. The oil pump also retains the crankshaft front oil seal.
  1. Remove the accessory drive belts.
  2. Remove the timing belt cover and timing belt. Refer to the timing belt removal and installation procedures in this section.
  3. Remove the crankshaft sprocket.
  4. Remove the oil pump mounting bolts (5), and remove oil pump assembly. Mark mounting bolts for proper installation during reassembly.

To install:
  1. Clean the oil pump and engine block gasket surfaces thoroughly.
  2. Position a new gasket on pump assembly and install on cylinder block. Make sure correct length bolts are in proper locations and tighten all bolts to 10 ft. lbs. (14 Nm).
  3. Install the crankshaft sprocket and timing belt. Recheck engine timing marks.
  4. Install the timing belt covers. For more details, refer to the timing belt cover installation procedures.
  5. Install the accessory drive belts.
  6. Refill the crankcase and start the engine.
  7. Check for correct engine oil pressure and for any oil leakage.
3.3 and 3.8 liter engines


  1. Disconnect the negative battery cable. Remove the dipstick.
  2. Raise the vehicle and support safely. Drain the oil and remove the oil pan.
  3. Remove the oil pickup.
  4. Remove the chain case cover.
  5. Disassemble the oil pump as required.

To install:
  1. Assemble the pump. Tighten the cover screws to 10 ft. lbs. (14 Nm).
  2. Prime the oil pump by filling the rotor cavity with fresh oil and turning the rotors until oil comes out the pressure port. Repeat a few times until no air bubbles are present.
  3. Install the chain case cover.
  4. Clean out the oil pickup or replace as required. Replace the oil pickup O-ring and install the pickup to the pump.
  5. Install the oil pan.
  6. Install the dipstick. Fill the engine with the proper amount of oil.
  7. Connect the negative battery cable and check the oil pressure. Check for any oil leaks.
for the 3.3 you can rebuild, 3.0 - replace.

Feb 15, 2011 | 1994 Dodge Caravan

1 Answer

How do i replace the serpentine belt on a 94 grand am se, with a/c, 5 spd manual


If it's like the GT model then you have to take the top engine mount off near the coolant which you also need to jack the engine up using a 2x4 between the jack and oil pan to get to the 3 bolts on the side bracket mounted on the engine right below the power steering pump

Aug 27, 2010 | 1994 Pontiac Grand Am

1 Answer

No power to fuel pump on a 94 cherokee what could be the problem? all relays are new.


the oil pressure switch conjoins to the fuel pump feed upon starting the engine. once the engine gets to normal oil pressure the computer will shut the feed off from the oil switch and turns the relay on to take over till you shut the engine off. If the fuel pump is good try this test. Turn the key to the on position & do not start the engine. You will hear the fuel pump running if the oil switch is good

May 08, 2010 | 1994 Jeep Grand Cherokee

1 Answer

How to replace an oil pump on 1994 3.4Lcamaro?


can I replace the oil pump with out removing the motor in a 94 Camaro 3.4

Apr 19, 2010 | 1995 Chevrolet Camaro

3 Answers

Oil pump change


take long bolts out that run thru motor mounts ,jack in front of motor all bolts in oil pan out, remove oil pan and then remove oil pump, replace new pump ,torque to specs, replace oil place with new pan gasket , bolts back thru mounts and ready to go, hope to help, thanks robert b.

Jul 06, 2009 | 1994 Buick LeSabre

1 Answer

94 cutlass ciere wont start


check out fuel pump relay and oil sending unit for oil leak oil sender is made to cut out fuel pump apon oil pressure failing

Jun 30, 2009 | 1994 Oldsmobile Cutlass Ciera

1 Answer

94 Grand Am looses power and abuses fuel. What is


Your fuel filter is probably on the fuel pump or on the fire wall of your engine - Mostly likely off of your fire wall. If it is loosing power have your catalytic convertor checked. Change your fuel pump, this could be your problem. All of these you can change yourself. I don't believe that a '94 Grand AM has an access panel to the fuel pump so you will have to drop the tank - Just make sure that it is below a 1/2 tank before dropping it. Buy a Chilton and it will give you step by step direction. Good luck!

May 16, 2009 | 1994 Pontiac Grand Am

1 Answer

Wiring the fuel pump


THIS 1994 Mercury Grand Marquis Fuel Pump Wiring Diagram41873503.gif Mercury Marquis Fuel Pump IS A 94, BUT IT IS THE SAME FOR BOTH YEARS.

Aug 26, 2008 | 1993 Mercury Grand Marquis

Not finding what you are looking for?
1994 Pontiac Grand Am Logo

176 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...