Question about Toyota Matrix

Open Question

Replace thermostat on toyota matrix - Matrix Toyota Cars & Trucks

Posted by on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

clifford224
  • 1975 Answers

SOURCE: replacement of thermostat on 2005 toyota matrix

Below are some instructions that should help. Hope they do....

2_26_2013_11_56_39_pm.jpg2_26_2013_11_56_51_pm.jpg2_26_2013_11_57_05_pm.jpg2_26_2013_11_57_21_pm.jpg2_26_2013_11_57_34_pm.jpg

Posted on Feb 26, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 toyota matrix new starter cranks no start


try resetting the CPU with a scanner .

Apr 10, 2014 | 2004 Toyota Matrix

1 Answer

Replacement of thermostat on 2005 toyota matrix


Below are some instructions that should help. Hope they do....

2_26_2013_11_56_39_pm.jpg2_26_2013_11_56_51_pm.jpg2_26_2013_11_57_05_pm.jpg2_26_2013_11_57_21_pm.jpg2_26_2013_11_57_34_pm.jpg

Feb 26, 2013 | 2005 Toyota Matrix

1 Answer

Toyota matrix 2005 emission control system incorrect purge flow po441


Toyota has published a service bulletin for this code> TSB-EG041-07 it involves replacing the engine control module (ECM) the warranty for this is 8yrs/80,000 miles, please contact your Toyota dealer for further assistance.EG041-07
EG041-07

Aug 21, 2011 | 2005 Toyota Matrix

1 Answer

Engine heats up but takes a long time for warm air to blow. Once working, the thermostat works fine. Sometimes, warm air starts to blow and then goes cooler.


low fluid level or heater control valve may need replace..check hoses going to heater core...if cold...between heater control valve and heater core..replace control valve

Jan 11, 2011 | 2003 Toyota Matrix

1 Answer

How to replace toyota matrix front headlight bulb


Hi,

Replacing a headlight on a Toyota Matrix is a simple process that only requires the use of a screwdriver and a replacement bulb. The Matrix uses 9006 bulbs for the low beams and 9005 bulbs for the high beams. Headlight bulbs can be purchased at auto parts stores.
Replacing Low Beam Bulb
  1. Turn off the engine of the Matrix and open the hood
  2. Rotate the bulb base in the headlamp assembly counterclockwise to remove the low beam bulb. Unplug the electrical connector. If the connector is too tight, wiggle it slightly to help remove it.
  3. Install a new bulb into the connector and place it into the assembly. Rotate it clockwise to lock it into place. Close the hood.
Replacing High Beam Bulb
  1. Turn off the engine of the Matrix and open the hood. If replacing the left-hand headlight, remove the air cleaner duct by removing the securing clip with a screwdriver and pulling the duct out of the vehicle.
  2. Turn the bulb base counterclockwise to remove it. Unplug the electrical connector.
  3. Install a new bulb into the connector and place the bulb into the assembly. Rotate it clockwise to lock it into place. Reattach the air cleaner duct if replacing the left-hand headlight. Close the hood
I hope this helps.

Best regards.

Oct 29, 2010 | 2005 Toyota Matrix

1 Answer

2005 toyota passenger side fog light replacement


The only way to get at that is to go from underneath the car in the front

Apr 20, 2010 | 2005 Toyota Matrix

1 Answer

2006 Toyota Matrix


uses 19 milimiter wrench or socket if fit move and py attention to the diag

Feb 26, 2009 | 2006 Toyota Matrix

1 Answer

How to replace the thermostat


First drain the radiator of some coolant to the point where it won't spill over because you will be removing the radiator hose near the radiator cap. remove the hose. the thermostat housing is located at the end of the hose. remove the housing. then remove the thermostat. when removing the housing notice how the thermostat is installed. And be sure to have a new gasket with the thermostat. Remove all residue from the housing and the engine and put some grease to hold the new gasket in place. The replace the thermostat making sure it fits flush with the housing so you won't break the housing when reinstalling the bolts. Replace the hose and refill with coolant. Start the engine to make sure no leaks are present.

Nov 26, 2008 | 2003 Toyota Matrix

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

132 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...