Question about 2008 Jeep Wrangler
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
1. Turn the ignition switch to the ON position (Do not
start the engine).
2. Fully depress the accelerator pedal slowly three
times within 10 seconds.
3. Turn the ignition switch to the OFF/LOCK position.
NOTE: If the indicator message illuminates when you
start the vehicle, the oil change indicator system did not
reset. If necessary repeat this procedure.
Posted on Oct 09, 2008
SOURCE: 2002 Jeep Wrangler appears the
It is the oil pan gasket all you have to do is drop the oil pan clean the bottom of the engine block and the surface of the oil pan and install the oil pan again. a very simple process. Make sure that it is not the rear main crank seal that is leaking. If it is the rear main then you will have to remove the tranny to replace the rear main seal.
Posted on Feb 17, 2009
can't really go wrong with synthetic oil as long as the grade and weight of the oil is equivelent to what is in there now.
Posted on Apr 11, 2009
Tips for a great answer:
Feb 02, 2013 | 2008 Jeep Wrangler Rubicon
Feb 09, 2010 | 2008 Jeep Wrangler
Jan 13, 2010 | 2003 Jeep Wrangler
Dec 01, 2009 | 2006 Jeep Wrangler
Jul 10, 2009 | 1997 Jeep Wrangler
Apr 11, 2009 | 1998 Jeep Wrangler
Apr 05, 2009 | 2001 Jeep Wrangler
119 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: