Question about 1999 Chrysler Town & Country

1 Answer

My oil light suddenly goes on & makes noise- the 1999 Town & Country stalls once in a while-what could be the problem?

I cannot see any leakage but my anti-freeze keeps on going down when I notice the heat isn't working well. I add anti-freeze then the heat goes on, The oil light is still ringing. I don't know what to do.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chrysler Master
  • 21,873 Answers

Could be time for a new van.
The oil light is warning the driver engine oil pressure has dropped below 10 psi, not necessarily that the engine is low on oil.
Common causes for low oil pressure is a faulty oil pump or screen, or worn engine parts.
The fact you are also adding coolant and you don't see any external leaks sounds like the engine is reaching the end of its life.

Posted on Jan 11, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

badealer888
  • 414 Answers

SOURCE: Describe your 2005 Chrysler Town & Country electric windows.

window cable is breaking. replace window motor and cable assembly.

Posted on Jul 12, 2009

AUTODOC01
  • 216 Answers

SOURCE: 2001 town & country van, check engine light

go to autozone for a free ecm scan write down the codes and repost then we can help too generic , can think of 15-20 things could cause this also include your vin for more accurate diagnosis AUTODOC

Posted on Aug 24, 2009

  • 1 Answer

SOURCE: 1999 town & country. speedometer won't work

I replaced the speed sensor & this took care of the problem.

Posted on Oct 07, 2009

  • 1 Answer

SOURCE: Town & Country the Power locks

2000 Chrysler town and country and my check engine light stays on. Just started today.

Posted on Nov 27, 2009

  • 47 Answers

SOURCE: why does my 2005 Town & Country radiator fan

The fan is computer controlled and will not come on untill it reaches 212Deg . It should come on though if you turn on the air conditioning, if not you could have a bad fan relay or relay plug.

Posted on Feb 22, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Oil light comes on and is dinging.


The oil light has nothing to do will oil level, but rather oil PRESSURE. If the engine oil is full and there is no rattling or banging noises in the engine, chances are the oil pressure sending unit is bad. If noises accompany the light, then shut down the engine and troubleshooting the engines internal lubrication system.

Aug 01, 2014 | 1999 Chrysler Town & Country

2 Answers

Oil light keeps coming on and dinging in my 1999 Town & Country but the oil is full


check /replace the oil pressure sensor . Have the oil pressure checked by a mechanical gauge to prove that the oil pressure is ok.

Aug 01, 2014 | 1999 Chrysler Town & Country

1 Answer

1999 Chrysler Town & Country


check battery connections ,clean them well and reattch, then let me know

Nov 30, 2013 | 1999 Chrysler Town & Country

2 Answers

I have a 95 town and country the gauges are not reading correctly the oil pressure reads really high when driving for about 10 minutes then levels out I just had an oil change my fuel gauge will sometimes...


If the check engine light is not on, stay away from sensors for now. First when is the last time you have had a tune up? PLugs , wires, air and fuel filter. Stalling at a stop can be from the air filter, fuel filter (clogging up), It can also be from the catalytic conveter, these also clog up. It can be from vacuum leaks, this usually has a rough idle also. It wouldn't hurt to check for codes, intermittant codes don't always pop the light on. On some vehicles the o2 sensors can cause a rough idle and stall at stops, ut they usually set a code/ light.

Jul 19, 2011 | 1995 Chrysler Town & Country

1 Answer

1997 town & country stalls intermittently. ... my chrysler town & country lxi dashboard cluster ligths go out


I had the same problem in the past with the lights. I repaired it by removing the the dash panel and re-soldering the pins where the harness plugs into. I am currently having the stall issue. in my research it seems to be the crank shaft sensor. I was told that the crank shaft sensor and the cam sensor work together and have decided to change them both along with the gas filter.

May 27, 2011 | 1997 Chrysler Town & Country

1 Answer

Oil starved rocker arms on a 3.8 l 1999 chrysler


Add a 1/2 can of SEAFOAM per instructions on can to oil aand run for a week. change oil and ad remaining 1/2 can. worked for me

Jan 23, 2010 | 1999 Chrysler Town & Country

1 Answer

2000 Town and Country stalling & Check oil light coming on


Check the oil level. The low oil sensor will disable the ignition if more than a quart low. If you have not checked your oil in the last 1600 miles, its past time to do so. Check oil often.

May 27, 2017 | 2000 Chrysler Town & Country

1 Answer

Describe your 2005 Chrysler Town & Country Problem HOW DIFFICULT IS IT TO CHANGE FRONT CRANK SEAL?


it's not too bad to change, you will need a special tool to remove the crank pully, it looks like a 3 jaw puller and once you get that off the seal is right behind it. Make sure to clean the crank pully shaft that goes through the seal with a piece of emery cloth to prevent leakage and coat it with either transmission assembly lube or a small amount of motor oil to prevent a dry start that can damage the seal again

Jul 23, 2009 | 2005 Chrysler Town & Country

1 Answer

2005 Town & Country stalls when turning the heater on


sounds like the heater is drawing down the battery. Which would be a battery or alternator problem most likely. If not check the amp draw of the blower motor .

Dec 14, 2008 | 2001 Chrysler Town & Country

Not finding what you are looking for?
1999 Chrysler Town & Country Logo

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...