Question about 2002 Chevrolet Silverado 2500HD
You mean the cam sensor, or the camshaft that is in the cylinder head ? ?
Posted on Jan 11, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
At the right rear of the engine under the intake manifold and to the left of the oil filter. You will probably need to go under the car to spot it, it's the sensor with a three-wire connector arranged vertically. But you can take it out from above. It's held in with a single bolt with an eight MM head located just above the sensor. Un-clip and remove the electrical connector. Unscrew the bolt with a socket wrench & extension bar. Wiggle and pull the sensor out.
here is a picture.
Posted on Apr 10, 2009
Tips for a great answer:
Aug 21, 2016 | Ford Cars & Trucks
Apr 02, 2016 | 2003 Ford Ranger
Jun 01, 2015 | Ford Cars & Trucks
Oct 04, 2011 | 1996 Ford Ranger SuperCab
Feb 12, 2010 | 1996 Ford Ranger SuperCab
Oct 21, 2009 | 1996 Ford Ranger SuperCab
Jun 09, 2009 | 1996 Ford Ranger SuperCab
Apr 08, 2009 | 1996 Ford Ranger SuperCab
Jan 17, 2009 | 2003 Ford Ranger Regular Cab
Aug 04, 2014 | 2002 Chevrolet Silverado 2500HD
81 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: