Question about Cars & Trucks

Open Question

Diagram for 3.0 tdci twin cam timing marks ford ranger

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

melvi_99
  • 387 Answers

SOURCE: Need timing marks (diagram) on a 1998 ford ranger

gm/ford69752b6.jpg

Posted on Jun 22, 2010

  • 12 Answers

SOURCE: Correct way to align timing marks

hi -- the timing marks on a twin cam are tricky!! heres how- turn the motor over to tdc on the bottom pulley,this will align two marks on the lower cog-----now on the top cog,it has an obvious mark near the teeth-- well disregard this for now!! the cog has a hole in it,in one of the spokes,well this goes at 12 o,clock and lines up with a mark you will see on the housing! now if you are right you will see the mark near the teeth is at around 4,oclock---i just did one and it is right--cheers

Posted on May 28, 2009

john631068
  • 172 Answers

SOURCE: Timing marks on 1999 Ford Ranger 2.5L.

Rotate the engine so that No. 1 cylinder is at TDC on the compression stroke. Check that the timing marks are aligned on the camshaft and crankshaft pulleys. An access plug is provided in the cam belt cover so that the camshaft timing can be checked without removal of the cover or any other parts. Set the crankshaft to TDC by aligning the timing mark on the crank pulley with the TDC mark on the belt cover. Look through the access hole in the belt cover to make sure that the timing mark on the cam drive sprocket is lined up with the pointer on the inner belt cover.

  1. Loosen the alternator retaining bolts and remove the drive belt from the pulleys. Remove the water pump pulley.
  2. Loosen and position the power steering pump mounting bracket and position it aside.
  3. Remove the four timing belt outer cover retaining bolts and remove the cover. Remove the crankshaft pulley and belt guide.
  4. Loosen the belt tensioner pulley assembly, then position a camshaft belt adjuster tool (T74P-6254-A or equivalent) on the tension spring rollpin and retract the belt tensioner away from the timing belt. Tighten the adjustment bolt to lock the tensioner in the retracted position.
  5. Remove the timing belt.

To install:
  1. Install the new belt over the crankshaft sprocket and then counterclockwise over the auxiliary and camshaft sprockets, making sure the lugs on the belt properly engage the sprocket teeth on the pulleys. Be careful not to rotate the pulleys when installing the belt.
  2. Release the timing belt tensioner pulley, allowing the tensioner to take up the belt slack. If the spring does not have enough tension to move the roller against the belt (belt hangs loose), it might be necessary to manually push the roller against the belt and tighten the bolt.

The spring cannot be used to set belt tension; a wrench must be used on the tensioner assembly.
  1. Rotate the crankshaft two complete turns by hand (in the normal direction of rotation) to remove the slack from the belt, then tighten the tensioner adjustment and pivot bolts to specifications. Refer to the necessary illustrations. Make sure the belt is seated properly on the pulleys and that the timing marks are still in alignment when No. 1 cylinder is again at TDC/compression.
  2. Install the crankshaft pulley and belt guide.
  3. Install the timing belt cover.
  4. Install the water pump pulley and fan blades. Install upper radiator hose if necessary. Refill the cooling system.
  5. Position the alternator and drive belts, then adjust and tighten it to specifications.
  6. Start the engine and check the ignition timing. Adjust the timing, if necessary.

Posted on Nov 25, 2009

  • 1757 Answers

SOURCE: timing marks on twin overhead cams 2.4 and crank mark.

Click on the following direct, Free Link. It has several Diagrams including the Timing Belt + Marks for your 2004 Hyundai Sonata 2.4L DOHC In-Line 4-Cylinder Engine (located on the bottom half of the Page on the Link). There are additional Diagrams that will prove to be helpful while you are doing this...

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/2004/make/hyundai/model/sonata/2004_hyundai_sonata_timing_belt_diagram_marks.htm

Posted on Apr 16, 2010

Testimonial: "tHANKS, tHIS WILL DO THE JOB."

jturcotte
  • 8210 Answers

SOURCE: 1998 ford ranger xlt 2.5

These are not very good but all I could find. The cam mark is about the 7 o'clock position. I cannot see the crankshaft marks in the side pic.
25f432e.gif
ffc6e4d.gif

Posted on Sep 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I am changing the oil pump on a ford fiesta TdCI and I need to know the cam belt timing marks or a diagram on the cam belt


Set the crank to 0 degrees according to the timing marks on the damper, look on the cam pulley for a mark and line it up with the mark on the head. Put the belt on WITHOUT moving the cam or the crank.

Jan 27, 2017 | Ford Cars & Trucks

1 Answer

Where is the timing marks situated?


http://www.isooko.com/index.php/component/jomclassifieds/advert/471

This is a diesel. If you really want to "play" I recommend you google for a Service or Repair manual for your engine. Otherwise
I believe the addage "If it ain't broke, don't fix it." It will last longer.

Mar 14, 2015 | 2010 Ford Ranger 3.0

1 Answer

1990 ford ranger 2.3 timing belt pully diagram


Set the crank to TDC using the timing marks, Then look for an arrow or a mark on the cam shaft pully and another mark on the block. Line those up. Put the belt on, make sure the marks did not move.

Feb 12, 2013 | Cars & Trucks

1 Answer

1990 ford ranger 2.3 timing belt pully diagram


Set the crank to TDC using the timing marks, look for a mark on the cam pulley and a mark on the head, line those marks up and put on the belt

Feb 12, 2013 | Cars & Trucks

2 Answers

Cambelt timing marks 2007ford ranger 3.0 litre automatic tdci


i need the right position of timing marks on twin cam on 3.0 Ford ranger Tdci

Aug 03, 2011 | Ford Ranger Cars & Trucks

1 Answer

1998 ford ranger xlt 2.5 liter engine, timing belt diagrams,or marks


These are not very good but all I could find. The cam mark is about the 7 o'clock position. I cannot see the crankshaft marks in the side pic.
25f432e.gif
ffc6e4d.gif

Sep 19, 2010 | Ford Ranger Cars & Trucks

1 Answer

I need a timing belt diagram for a 1994 ford ranger 2.3 liter.


Bottom pulley at 0 (TDC), dystributor rotor indicating cylinder one and marks on head an top cam pulley that will align exactly with valves on cylinder number 1 on compression, both closed (perhaps one mark exactly at 12 o clock) (or two marks one at 9 o clock an the other at 3 o clock ) but on front of cm pulley

Jan 23, 2009 | Ford Ranger Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,520 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...