Question about 2007 Audi Q7 3.6

Open Question



Posted by Anonymous on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I need to remove a 2007 audi tt door mirror

Drive over 30 mph, then drive really close to a pole (on the side with the mirror you're removing) and knock the mirror on the pole. If it doesn't come off the first time, do a U-turn and repeat the process.

Jul 24, 2012 | 2008 Audi TT Coupe

1 Answer

Adjust clock

Typically Audis have a single stalk sticking out of the instrument panel near the clock; firmly twisting to one side moves the hours, while twisting to the other moves the minutes. There's a short delay before it begins to react. Don't attempt this while driving! It requires real concentration to do.

Jul 03, 2012 | 2008 Audi A4 Sedan

1 Answer

How to replace door mirror glass on 2007 VW Golf Plus

It should just pop off if you get something in behind the acctual glass and gently lever it you dont need to get the rear casing off at all. If its heated the wiring will be simple bayonet connectors easy to take off/on. Gently push the new glass into position and readjust teh mirror from the cabin as it will have moved!

Audi Performance Chip

Jun 17, 2012 | Cars & Trucks

1 Answer

The electric outside mirrors stopped working, is there a fuse?

Did you splice wires or replace connector? I am having same trouble with 2007 Q7

Feb 16, 2012 | 2008 Audi Q7

1 Answer

2007 passenger folding mirror will not work

{: ) Have someone control the power fold buttons, while you check closely the passenger mirror. If you can feel or hear even a faint hum of the motor while commanded, try giving it a little help, but don't force it if you think it doesn't have enough power to extend or retract itself. The motor could be really stuck or inoperative.
Sometimes when the mirror has been accidentally or manually folded, it needs to be reset by just pressing on the fold buttons a few rounds and let the mirrors fold by itself. Like an exercise.
If you hear the humming noise whenever the fold buttons are pressed, we can assume that the circuit on that side is ok since it is responding electrically, and that a jammed or stuck mechanism is preventing it to move.
If you don't feel or hear any humming, as in totally no sign of response, then there will be additional considerations before deciding to go for a replacement mirror. You will need to confirm if the fault is on the wirings, a door module, or the mirror motor itself. A scan tool test may be recommended for effective diagnosis.
The power fold mirror can be serviced as an assembly. So, goodluck.

Aug 30, 2011 | 2005 GMC Yukon

1 Answer

I need to replace my audi a6 driver side mirror? I have the new one and i'm trying to take off the old one, but i don't want to damage anything. How do i remove the old one?

Hi,to remove it the door panel needs to come of and then the cover on in side of door at side of mirror there will be screws there for the mirror.hope this helps

Jul 20, 2011 | 2004 Audi A4

1 Answer

Need to replace the mirror switch on my Audi 1999 A6. Can't figure out how to remove center console.

I replaced mine a few years ago and don't remember having to remove the center console. I think I just "popped" it out. If I find the instructions I used I'll post them.

Jun 16, 2010 | 1999 Audi A6

Not finding what you are looking for?
2007 Audi Q7 3.6 Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers


Level 3 Expert

76649 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14379 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides