Question about Cars & Trucks

Open Question

Ford ikon flair 2004, starting problem, changed the fuel pump, ignition coil, all sensors, but still the problem is there ,need help

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 96 jeep grand cherokee 4.0

change the computer .... PCM get a used one it fixed mine had same problem

Posted on Feb 19, 2009

sledge1863
  • 149 Answers

SOURCE: 1995 lumina cranks but will not start

Sounds like it has jumped timing, dont know which engine you have so could be chain or belt.

Posted on Mar 23, 2009

  • 158 Answers

SOURCE: ford telstar ignition coil f-694 and igniter deliver no spark

your distributor modual needs replacing

Posted on Apr 01, 2009

joe7379
  • 93 Answers

SOURCE: 2001 ford taurus wont start

It could be bad plugs, plug wires, a bad ground will do this as well. Check to see if it has the three main things.

Spark
Air
Fuel

Anther common problem is the crank shaft speed sensor. It will cause it to not spark and not start.

Joe

Posted on May 19, 2009

  • 2418 Answers

SOURCE: 2004 Ford F350 diesel, changed fuel filters hard starting

Pull the filters and ck for plastic or o-ring in wrong place. Something is up in the filter. 

Posted on Jul 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My ford icon 1.6i only accelerate at 2000 rpm and idel between. 0.900/1000rpm and use accessive fuel..pullaway is weak??


Problem with my Ford Ikon 1.6? ' Yahoo Answers

https://answers.yahoo.com/question/index?qid...
Jun 10, 2012 - The same problem presist on slow speed also. ... Still the problem presist on sudden acceleration and when we strart up in signals. .... Ford ikon 2002 clx 1.6i starting problems start quick on running can it be the starter?

Ford Ikon fuel consumption, miles per gallon or litres/ km ...

www.cfcr.eu/ford-ikon-fuel-consumption-miles-per-gallon-or-litres-km
Ford Ikon fuel consumption, miles per gallon or litres/ km ... How much fuelconsumed Ford Ikon 1.6 i, liters / 100 km or miles per gallon. Ford Ikon 1.6i it is a ...

Oct 24, 2015 | Ford Cars & Trucks

1 Answer

My ford ikon flair 1.3 petrol shows black smoke from its silencer during starting and running at low gears?


black smoke is an indication of excessive fuel
it can be from excessive fuel pressure faulty injectors and sensor problems
run the fault codes to find where the fault is and repair the items or replace

Apr 14, 2015 | Ford Cars & Trucks

1 Answer

1999 chrysler cirrus 2.5l won't start


The ECM sends a GND signal to the Fuel Pump relay to switch it ON. When 'jumping' relays, there is a risk that you might feed +12V to Gnd switch line, in this case the ECM line. If left too long, this would blow the diodes in the ECM. Try using another ECM. Try following the ignition circuit from the ignition coil back to the ECM. One of the wires connected to coil should have +12v when IGN on. Sparking only happens when ECM sends GND pulses to the coil. If ECM is OK, check camshaft position sensor, which is also usually referred to by the ECM for ignition firing.

Jun 12, 2014 | 2004 Volkswagen Passat

1 Answer

Replaced ignition coil starter spark plugs fuel pump and filter on a 2004 Ford Taurus and its still not getting any fire what could be causing it not to start


Did you replace the fuel pump and starter because they were defective ?
The ignition system consists of the coil and module assembly, cam and crank sensors, and the computer. Someone would need to check the coil for power and a ground signal from the computer. You would need a shop manual to get the test procedures.

May 19, 2013 | Cars & Trucks

2 Answers

MY 2004 Ford Ranger engine turns over but wont start.


Are you getting fire?have you checked your fuel filter and coil pack

Dec 08, 2012 | 2004 Ford Ranger

1 Answer

FORD IKON 1.3 FLAIR RADITOR FAN NOT WORKING/EARTH SUPPLY NOT THEIR


that sounds like a faulty coolant temp sensor, if it fails you will have to hold the gas to get it to start and the computer will not know when to turn the fan on.

Nov 08, 2012 | Ford Cars & Trucks

2 Answers

My 2004 E450 6.8 ford motor home will crank but not run what do look for


Towed to the GM shop today. Problem: the electrical connection in the trunk to the fuel pump was disrupted, and therefore, no fuel pump function! We had put stuff in the trunk for traveling. ...

Sep 11, 2012 | Ford E-Series Cars & Trucks

1 Answer

2001 ford taurus changed fuel pump ignition coil and crank shaft sensor still wont start


DOES YOUR ALARM IS OFF OR YOUR SMART KEY ( IGNITION KEY WITH CHIP IS WORKING?

Sep 02, 2012 | Ford Taurus Cars & Trucks

1 Answer

Wont start


is the your car engine cranking when you try to start, first check spark plugs ignition coils, remove one ignition coil and spark plug fix the spark plug in to the ignition coil then connect ignition coil to wiring and keep spark plug body touching on ground of engine head mettle parts, ask some one to crank engine then you can see is the plug sparking or not, do the same way to all the coils and plug otherwise you have to buy a ignition spark tester, is the all the coils and spark plugs are OK then check the fuel pump, it's sitting in under rear seat, before that do one thing disconnect oxygen (O2) sensor wiring and crank engine, the thing is if your oxygen sensor completely dead fuel pump will stop working, if engine start after disconnect O2 sensor, replace new O2 sensor, otherwise need to check fuel pump relay fuse and fuel pump. is this information helped you? please vote me and give a comment.

Oct 15, 2010 | 1998 BMW M3

1 Answer

2004 lincoln ls,v6,no codes,no power when apply the gas pedal.


Did you check fuel pressure? Fuel filter fairly new? Air filter clean and all duct work tight? Battery voltage good when engine is running? Check Throttle Position Sensor for codes and values. Also Ignition coils go bad on these ,as often as you change your socks. TPS is avail on line and auto parts store. You do not have to go to dealer or change entire throttle body, just the sensor,if bad.


You will need a new TPS Sensor,Egr Valve, Ignition Coil or two and a Transmission Solenoid Pack,pretty soon. I have a 2004 V8 L/S. Tough car to troubleshoot and a never ending saga,as is most Fords.

Mar 02, 2010 | 2004 Lincoln LS

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...