Question about Ford Cars & Trucks

Open Question

F250 slosh module - Ford Cars & Trucks

Posted by Anonymous on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where is the anti slosh module in a 2000 nissan maxima

I don''t show a part number for a stand alone module like ford used for years. I believe it is either built into the instrument cluster circuit board or it is a function of the BCM

Sep 23, 2016 | 2000 Nissan Maxima

1 Answer

Does the 1993 dodge Dakota have an anti slosh module for the fuel gauge

The fuel sending unit inside the tank just has an arm attached to a float which raises/lowers depending on fuel level. The tank itself will have internal dividers that help prevent sloshing of the fuel. There is no module to control sloshing

Sep 19, 2015 | 1993 Dodge Dakota

1 Answer

What does the PCM due on a 2002 ford f250 super duty with v10 engine?

PCM is the Powertrain Control Module.. It controls the enigne and on some model vehicles the tranmission as well. Make sure whom ever is telling you what is bad is telling you the correct "computer" or "module" your 02 has the 7.3L in it and there is also an IDM that operates the injectors (Injector Driver Module) Newer years with the 6.0L engine have whats called a FICM instead of an IDM... Fuel Injection Control Module.

Sep 30, 2013 | 2002 Ford F250 Super Duty SuperCab

1 Answer

Where's the vehicle security module on a 2004 ford f250

The Security Module is located under the Dash. It is a Black and White Box with a White Sticker on it with Large and Small Letters.

It is under the DRIVERS SIDE...

Apr 06, 2013 | 2002 Ford F250 Super Duty SuperCab

1 Answer

Body control gem module f250 2001 ford

The windshields leak on the left side
& water gets into the delayed acc relay
& GEM Module connection

Read up on that on the internet

Haven't found a windshield leak solution yet
to help you there

Feb 26, 2013 | 2001 Ford F250 Super Duty Super Cab

1 Answer

2001 Chevrolet Silverado 1500. Can't find anti-slosh module

I've never had to replace one, but I do know that it is somewhere in the guage cluster. Although, chevy trucks have always had a problem with the fuel guage "floating" up and down.

Jul 15, 2012 | Chevrolet Cars & Trucks

1 Answer

Fuel guage wiring from tank to dash not responding in a restored 88 crown vic interceptor do you have a wiring diagram or just some hints as to the wherabouts of all the connections between the two. A...

It kind of sounds like the Anti-Slosh Module. The fuel gauge is connected to the fuel gauge sender through the Anti-Slosh Module. The sender is a variable resistor connected to the float in the fuel tank which determines the amount of fuel in the tank Anti-Slosh Module. The Anti-Slosh Module provides a delay circuit to the fuel gauge which prevents the fuel gauge from fluctuating due to excessive movement of gas in the fuel tank. The Anti-Slosh Module is part of the instrument cluster and to replace it, you will need to replace the instrument cluster. I had to do one when I worked at Ford on one of their cars.

May 18, 2010 | 1988 Ford Crown Victoria

1 Answer

Modulator possibly went bad

use a Mityvac or any type of vaccum pump vaccum tester tool (avail at ay parts store) and hook it to the vacuum nipple of the vacuum modulator on the side of the trans, pump the tool to see if modualtor holds vacuum, if it doesn't it is defective.

Jun 19, 2009 | 1990 Ford F250

1 Answer

Searching for electrical circuit of anti-slosh module

It is in the guage cluster, should be a part of or connected to the fuel guage.

Mar 24, 2009 | 1994 Ford Taurus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers


Level 3 Expert

5522 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides