Question about Chevrolet Avalanche

Open Question

Rocker arm torque for 02 avalanche 5.3L - Avalanche Chevrolet Cars & Trucks

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Engine Bolt Torques- 2005 Chevy Impala/3400 Engine

Head Bolts
Step one 37 ft lbs then tignten 120 degrees more

Rocker arms
Step one 11 ft lbs then tighten 90 degresss more

Upper intake
89 inch lbs
Lower intake
132 inch lbs

Posted on Dec 02, 2008

  • 2692 Answers

SOURCE: Torque Specs

Torque: 210 @ 4000 rpm

Posted on Dec 22, 2008

  • 1 Answer

SOURCE: 2004 pontiac grand am 3.4 rocker arm torque?

the rocker arm torque specs for the la1 gm 3400 sfi v6 is 168in lbs or 14ft lbs and 30degrees past that hope that helps you it came straight from my local dealer!

Posted on Apr 16, 2009

sirgabe51
  • 66 Answers

SOURCE: I have 4.9L6 need torque specs for cylinder head

for cylinder head the torque is : step 1 55 ft-lb, step 2 65 ft-lb, step 3 85 ft-lb. Rocker arm stud nut or bolt is 17 to 23 ft-lb. and valve cover bolt 72 to 108 in-lb.


e023442.jpg

Posted on Dec 05, 2009

  • 1168 Answers

SOURCE: I need to know the torque specs for the rocker arm

Hello.
The torque specification on the rocker arm nut is 22 ft/lbs
I hope your repair goes well.
KL

Posted on Dec 09, 2009

Testimonial: "Thanks a million! My repair is going very well and should finish up tonight."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the correct torque specs. for lower intake manifold and upper, and rocker arm torque for 02 Buick Rendezvous 3.4 v-6 are the rocker arms pre load non adjustable


Call any major autoparts store for the correct answer. There are updated torque specs for the gm 3.4 vs in order to deal with a common issue of leaking intake manifold gaskets. They should have the correct updated spec for you vehicle based on the specific Vin number

Feb 01, 2017 | 2002 Buick Rendezvous

1 Answer

Torque specs 2003 olds silhouette rocker arm 3.400


Here is a suggested updated torque spec for this engine's rocker arm bolts;
Rocker arms
Step one: Torque to 11 ft lbs then tighten an additional 90 degrees of bolt head rotation. Some guys don't fuss with the torque specs and just get them good and tight. Either way, be careful, as the heads are aluminum. You do not want to over tighten these bolts

Oct 07, 2016 | 2003 Oldsmobile Silhouette

1 Answer

What is the right way to torque the rocker arms an the sequence


No torque sequence on rocker arm bolts. 11 ft lbs plus 30 degrees.
A torque wrench rated for inch lbs should be a finer adjustment.

Oct 06, 2016 | 2002 Buick Rendezvous

1 Answer

What are the rocker arm torque specs on a 1996 dodge caravan 3.0 liter


Hi Derrel,here's a link to a Autozone repair guide on your rocker arms,you can join their site like me for free and use all their repairs guides,need more help,let me know,k. Repair Guides Engine Mechanical Rocker Arm shafts AutoZone com

Aug 29, 2016 | 1996 Dodge Caravan

1 Answer

Rocker arm pivot torque for olds cutlass 1987 307


Oldsmobile Torque Specs - GbodyOlds.com

www.gbodyolds.com/forum/showthread.php?754-Oldsmobile-Torque...
Feb 7, 2013 - 2 posts - ‎2 authors Oldsmobile Small-Block Engines Cylinder Head Bolts (1/2in. bolt) 130 ft. lbs. Cylinder Head ... Rocker Arm Pivot Bolt 25 ft. lbs. Rod Bearing ...

Rocker Arms - AutoZone

www.autozone.com/...Cutlass...1987.../Rocker-Arms/_/P-0900...

AutoZoneGM Cutlass RWD 1970-1987 Repair Guide ... To remove the rocker arms from the shaft, the nylon arm retainers must be removed. ... 7: Engine valve system, 260, 307, 350, 403 Oldsmobile built engines ... Unfasten the two bolts that attach the rocker arm pivot to the cylinder head. ... Torque the retaining bolts to 25 ft. lbs.

Dec 01, 2015 | 1987 Oldsmobile Cutlass Salon

2 Answers

Valve lash procedure


i need to know how to adjust the valves on 02 pont sunfire

Nov 20, 2011 | 1991 Chevrolet K1500

2 Answers

Rocker arm toruge specs, how many lbs?


FOR THE 242 -4.0 ENGINE ROCKER ARM TORQUE IS 21 FT LBS FOR THE 5.2L AND 5.9L ENGINES ROCKER ARM TORQUE IS 21 FT LBS.

Aug 04, 2010 | 2000 Jeep Grand Cherokee

2 Answers

What are the torque measurements for the rocker arms and intake manafold?


2.2L Engine & 2.4L Engines
These engines are not equipped with rocker arms. The camshafts directly actuate the valves.

3.1L Engine & 3.4L Engines
When install or connect the check the following:
- Pushrods and the rocker arms. Torque the bolts to 24 ft. lbs. (32 Nm). - Rocker arm cover using a new gasket. Torque the rocker cover bolts to 89 inch lbs. (10 Nm).
- Heater bypass pipe. Torque the screw at the water pump to 106 inch lbs. (12 Nm), the bolt at the cylinder head corner to 18 ft. lbs. (25 Nm) and the nut to 18 ft. lbs. (25 Nm).


About the INTAKE MANIFOLD...
-
Intake manifold nuts and bolts and tighten to 89 inch lbs. (10 Nm)
- Pushrods and rocker arms. Torque the bolts to 89 inch lbs. (10 Nm) plus an additional 30 degree turn. - Lower intake manifold. Apply sealant to the threads of the bolts and torque the bolts to 115 inch lbs. (13 Nm).



859cdc3.jpg

Exploded view of the upper and lower intake-3.1L & 3.4L engines


fe92b8b.jpg

Fig. Lower intake manifold tightening sequence-3.1L & 3.4L engines

Hope help.

May 04, 2010 | 2000 Pontiac Grand Am GT

2 Answers

I need rocker torque for 2003 pontiac with 3.1liter


Left side:

To install:
  1. Lubricate all the valvetrain components with engine oil.
  2. Install or connect the following:
    • Pushrods and the rocker arms and tighten the bolts to 14 ft. lbs. (19 Nm) plus 30 degrees
    • Rocker arm cover using a new gasket and tighten the rocker cover bolts to 89 inch lbs. (10 Nm)
    • PCV valve to the rocker arm cover
    • Coolant tube with the thermostat bypass hose and tighten the bolt to 98 inch lbs. (11 Nm) and the nut to 18 ft. lbs. (25 Nm)
    • AIR check valve pipe and torque the adapters to 22 ft. lbs. (30 Nm)
    • Engine mount strut and torque the bolt to 35 ft. lbs. (48 Nm)
    • Spark plug wires
    • Negative battery cable
Right side:

To install:
  1. Lubricate all the valve train components with engine oil.
  2. Install or connect the following:
    • Pushrods and the rocker arms and tighten the bolts to 14 ft. lbs. (19 Nm) plus 30 degrees
    • Rocker arm cover using a new gasket and tighten the rocker cover bolts to 89 inch lbs. (10 Nm)
    • Power brake booster vacuum pipe to the plenum
    • EVAP solenoid and ignition coil assembly
    • Spark plug wires
    • Alternator bracket and torque the bolts to 37 ft. lbs. (50 Nm)
    • Alternator and torque the bolts to 37 ft. lbs. (50 Nm)
    • Accessory drive belt
    • Negative battery cable
  3. Start the vehicle and verify no leaks.

Feb 06, 2010 | 2003 Pontiac Grand Prix

2 Answers

2004 pontiac grand am 3.4 rocker arm torque?


the rocker arm torque specs for the la1 gm 3400 sfi v6 is 168in lbs or 14ft lbs and 30degrees past that hope that helps you it came straight from my local dealer!

Apr 05, 2009 | 2004 Pontiac Grand Am

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...